Linear GD00Z-4 Z-Wave Garage Door Opener and Amazon echo

bamarayne · December 30, 2015, 5:37am

Hey there and welcome to the community.

First of all, what device type are you using? Are you using the stock ST one or a custom one?
(Do you know how to check on this yet?).

This is the custom code that I use: (Follow the link)

github.com

gouldner/SmartThingsPublic/blob/master/devicetypes/gouldner/rg-linear-gd00z-garage-door-opener.src/rg-linear-gd00z-garage-door-opener.groovy

/**
 *  Z-Wave Garage Door Opener
 *  Z-Wave Garage Door Opener Modified for GD00Z by @Garyd, Copied and modifed by @Ron
 *
 *  Copyright 2014 SmartThings
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
 *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
 *  for the specific language governing permissions and limitations under the License.
 *
 */
 

preferences {
    input name: "enableSwitch", type: "enum", title: "Enable Switch Capability?", options: ["Disabled","On=Open","On=Close"], description: "Enable Switch Capability?", required: true

This file has been truncated. show original

Read the thread in this link for some good information as well:

N00bs guide to ST & GD00Z (Garage Door Controller) FAQ

Current as 09/25/16 So like many of us getting started I couldn’t figure out how to REALLY get the SmartThings (ST) and Garage Door Controller to work. After help from other users I figured I’d put together a nice spoon fed thread on how to get it working. First off we’re talking about the GD00Z Garage Door Controller, there are MANY different companies that make this device, mine is a NuTone (NGD00Z), there’s a version by GoControl, Linear, Iris (Lowes) etc. My understanding they are all Linear devices just rebranded. With the unit you should find a small sensor with an arrow. Installation is VERY easy, tape / screw the the small sensor onto the garage door, I placed mine in the middle of the TOP garage door segment all the way to one side. Reason: I BELIEVE it will ensure that t…

I am using this same garage door opener, ST, and the Amazon Echo. They all work wonderfully together.

Topic		Replies	Views
New to Smartthings and would like to know how to get echo to work with linear garage door opener Devices & Integrations	66	8585	November 27, 2016
How To - Linear Garage door and Amazon Alexa FAQ lineargaragedoor , alexagaragedoor , echogaragedoor , project_garage , project_voice	60	25592	April 16, 2019
ST & Linear’s GD00Z-1 Z-Wave garage door controller Connected Things	135	27547	March 1, 2017
GoControl GD00Z-4 Z-Wave Garage door opener to work with Alexa (Echo) Devices & Integrations	19	15687	November 13, 2021
[OBSOLETE] Enhanced Z-wave garage door opener code (for Linear GD00Z and variants) Community Created Drivers dth_garage	193	32448	December 20, 2022

Linear GD00Z-4 Z-Wave Garage Door Opener and Amazon echo

Related topics