Honeywell Z wave 4 way wiring questions

[joshua1742 (josh)]

GE Z Wave 4 Way Switch Setup

I am almost positive those white wires are NOT a neutral in your old 4 way switch location which is your problem. When installing smart switches in a 4way setup you often need to “send” the neutral to the other switch locations. So to fix this you need to go to the switch that has the actual line, which honestly is likely NOT the location with your current master given the fact that wire is covered in black tape. I suspect that same wire with tape on it is what you are hooked up to in your former 4 way location. Without seeing your 3rd box location, here is what I think you should do. Few things to get on the same page: First picture posted with master I will refer to as switch 1 Second picture posted with old 4 way and broken Aux I will refer to as switch 2 Unpictured switch I will …

I was able to solve with the instruction in that post. I just simply made a spare traveler wire not being used to a neutral through out the switches. But one of the electrical box is so stuffed wires that whenever I put the z wave unit inside the box, something activates breaker.