Hello, I have two Fibaro smoke sensors (FGSD-002) that have been successfully paired with Smartthings hub. However, the smoke sensors do not report temperature like they should. I have tried to change reporting interval to 5 min and report hysteris to 1 degree, but nothing happens. This thread sugg…

Tried again and behaviour was “normal”. If looking events it show very good when it’s flood sensor… [Sieppaa2] There has to be something wrong between device handler and these sensors. Are my sensors somehow newer version or something and that could be the reason for not showing as smoke sensor. …

The zw:Ss is secure mode, so that’s OK. You do need to use the smoke sensor DTH. Just make sure you don’t have any custom DTH for the smoke detect in your IDE. Then go into the device on your phone and set all the settings. I have mine as Medium, disabled, disabled, disabled, 15 minutes, 10, 55, 5 m…

At night sensor was able To do 2 successful reports with ST. At 3am and 4.17am…nothing To do with 5min reports settings I configured. I tried now your settings and event log says again Entity_update DeviceUpdated -> false. In IDE it shows that there id right settings but for some reason configurat…

Can you post a section of the live log for when you save the settings the app and then press the button on the smoke sensor?

I got them working. Default Smartthings Fibaro Smoke Sensor device handler in IDE is not correct and should not be used with FGSD-002 EU sensors. Found this link: https://manuals.fibaro.com/knowledge-base-browse/st-handlers/ There was link to official Github: [image] richb1/FIBARO-Off…

Glad you got it working. This is interesting though as mine are working with the standard DTH. When I originally installed them I was using another DTH and I recall issues getting the temp working. I recall seeing the standard one had been fixed so I switched to that. Maybe the fact I had installed…

I use this DTH for the sensor and it appears to be working well. It allows some other settings compared to the one you linked below. Have been using it for about 6 months.

Tested that too and didn’t work. There might be some issues between the sensor models. I have 0003 and your DTH is marked for 0002. I think my handler is missing led settings which can be adjusted in Fibaro Smoke Sensor DH.

Has anyone tried real smoke test with Fibaro? Selftest says everything is ok. I smoked some candle under the sensor but couldn’t create an alarm. Don’t know if there wasn’t enough smoke cause my alarm level is set to “medium”. Found one smoke test video from youtube and there was lot more smoke but…

You cant smoke test with a candle. You need a proper smoke test pen - you can get them online or in a good DIY shop or plumbers merchant

Fibaro Smoke Sensor FGSD-002 EU - Not reporting temperature

Devices & Integrations

Dmagge (Marko Saha) April 18, 2020, 10:46am 42

My problem with temperature reporting in Fibaro smoke detector was due to improper pairing of the device. This helped me to solve the problem: Having An Issue With networkSecurityLevel: ZWAVE_S0_FAILED

Topic		Replies	Views
Fibaro Smoke detector Device Ideas	69	14013	October 5, 2019
Fibaro smoke sensor not reporting temp Devices & Integrations hubv2	28	5557	August 27, 2018
'Fibaro Z-Wave FGK-101 Temperature & Door/Window Sensor' Full Support Handler Community Created Drivers fibaro , dth_sensors	525	46634	July 1, 2022
Freezer Monitoring - using a Fibaro FGK-101 Temperature & Door/Window sensor Community Created Drivers dth_sensors	21	5481	January 21, 2019
[OBSOLETE] Fibaro Motion Sensor v3.2 Community Created SmartApps fibaro , dth_motionsensor , dth_luxsensor , dth_sensors	181	21790	March 7, 2021

Fibaro Smoke Sensor FGSD-002 EU - Not reporting temperature

Related topics