Hi Matt,
I’ve found a quite detailed manual on the z-wave alliance website for the Fakro zws12. Just search for Fakro zws12 calibration and it should be the first in the list.
Do you have rain sensor too?
The calibration is quite straightforward from the physical buttons on the device. But a bit misleading from the remote. I don’t know how the remote works, but I would be surprised if it would be a momentary or step control switch for movements. My device and remote does send an FF to open and 00 to close. The stop is controlled by one of the opposite commands or by a switchMultilevelStopLevelChange command.
You can definitely try to calibrate through the physical buttons.
I can help to put together a DH based on what I’ve made for my MOB.IQ modules, what is partially based on a Fibaro Roller Shutter DH.
The parameter list in your application is not corresponding to the manual, maybe that is another problem.
Is your device type 0003 id 0001 or type 0002 id 0011 as in the manual? The ST ide would give you the correct number.
If you manage to calibrate it, then it is more fun to control inbetween positions. But even without calibration I managed to use my modules with the zwave dimmer DH to open and close with a daily schedule.
Let me know what you managed to achieve and I can help to build the DH.
Best Regards,
Gábor