This device works with the Zigbee multi switch DTH. Has options of: Momentary operation on either channel, independently. ON/OFF independently of both channels. Interlock mode, polarity reversing operation. (can also be configured for 3 wire high/low fan speed etc…) RF433 Remote (FOB) connecti…

I’m not a fan of the screw terminals on this device, mainly because the metal is so soft. I think as long as you are powering your end devices with 7-32v, you can use the same power for the device as for the relays as long as you make jumpers to relay side. That’s probably obvious, but I was a litt…

[image] blkwll: DTH. Hello, are there somebody who tried use 4ch version? I have it on the table and trying it. My Smartthing HUB see only 2 channels. I used Zigbee multi switch DTH. Aliexpress 4 chanel switch Any ideas? Thank you.

You may be the first person to try the 4 channel version with Smartthings. I would have thought the Zigbee Multi Switch DTH would have worked, but I do not have the 4-channel version yet to try. So, I won’t be of much help in getting it working. Considering that many our Smartthings community memb…

Thank you for your reply. Hope that there will be way to succes:-) I would like use this module for connect to exist home automation Jablotron. Zigbee switch will be as trigere connected to input of Jablotron and after that I would like control Jablotron via voice through Google assistant:-)

[image] blkwll: Zigbee Multi Switch I’ve tried this with the 4 way switch and it just adds 2 controllable switches in SmartThings. I’ll try and figure out how to modify it to do 4.

This DTH works with the 4 way version [image] Device Handler for Tuya ZIGBEE 3 or 4 Gang Switch Module Devices & Integrations So i found the solution to alot of Tuya Zigbee Switch and modules!!

Well, that was quick! That’s really good to know. Hopefully the DTH will easily be converted to an Edge driver.

Thank you Paul, I tried it and work it well. So, now I can buy another modules:-) Thank you one more time.

[image] blkwll: Zigbee Multi Switch DTH How do I scan for the MHCOZY device using the zigbee DTH in smartthings?

How do i get the device to show up once I added the device handler in ST?

eWeLink Zigbee Two-Channel Relay

Devices & Integrations

pau1phi11ips (Paul Phillips) October 6, 2021, 8:48pm 10

This DTH works with the 4 way version

Topic		Replies	Views
Orvibo Zigbee Relay RL804QZB Community Created Drivers dth_lighting , dth_inwallmicro	25	13051	November 27, 2019
[OBSOLETE] Monoprice Dual Relay On/Off Device type 11990 Community Created Drivers dth_lighting , dth_inwallmicro	68	16830	January 19, 2023
[OBSOLETE..] Monoprice Dual Relay On/Off Device type 11990 Community Created Drivers dth_lighting , dth_inwallmicro	72	16933	January 31, 2023
[SURVEY] SHOWDOWN: Vote for Your Favorite Z-Wave/Zigbee In-Wall Relay Switch Modules Devices & Integrations poll , switch	28	15186	March 29, 2018
[RELEASE] Zooz MultiRelay (ZEN16) Community Created Drivers dth_lighting , dth_outlet	174	14603	March 1, 2023

eWeLink Zigbee Two-Channel Relay

Related topics