Edge drivers for telnet/raw tcp controlled devices

[philh30]

Depending on the vintage of your receiver, this might already support it. If not, the GitHub repo is linked which may give you a good starting point.

[ST Edge] Onkyo/Pioneer AV Receivers

This driver supports Onkyo and Pioneer AV Receivers that accept eISCP commands. Power, Volume, and Source Zone 2 (if configured to display in settings) [Screenshot_20220223-212942] Installation: Use the Channel Invitation to enroll in the channel and install the driver Select scan nearby in the ST app and wait for your receiver to be discovered Settings: Zones Displayed - Changes profile to hide or show zone 2. After changing this setting, you will need to exit and re-enter the device detail view for the change to take effect, and may need to close and restart the app. Volume Scale - Receivers have been produced with three different volume scales. Choose the scale that matches your device (1-80; 1-100 w/ 1% increments; 1-100% w/ 0.5% increments). Input 0xXX - These options…