@syho
I will publish it again and I don’t know if the manufacturer or model will have any blank spaces, which I think has already been resolved
Sorry, I had added it to another driver 
Try now with this version
┌─────────────┬──────────────────────────────────────┐
│ Name │ Zigbee Contact Mc │
│ Version │ 2022-02-12T17:12:42.810958 │
└─────────────┴──────────────────────────────────────┘
1 Like
Did you get the chance to dig deeper tn DTH?
Anything I can help?
Sensor is pairing now and reporting contact and temp correctly but battery is not working.
Log
2022-02-12T23:58:05.816840971+00:00 INFO Zigbee Contact Mc Executing ZclClusterAttributeValueHandler: cluster: PowerConfiguration, attribute: BatteryVoltage
2022-02-12T23:58:05.820187346+00:00 WARN Zigbee Contact Mc The device reported a voltage, but the driver was not configured to handle it.
Is it possible to have custom temperature reporting interval and reportable change like your other drivers? Thanks.
Hello Mariano, I have a list of zigbee devices, could you add this driver:
Tuya Contact Sensor: Model iH-F001 (on Box Label)
zigbeeNodeType: SLEEPY_END_DEVICE
application: 45
endpointId: 01
manufacturer: _TZ3000_oxslv1c9
model: TS0203
Raw Description 01 0104 0402 01 04 0001 0003 0500 0000 08 0003 0004 0005 0006 0008 1000 0019 000A
Tuya Water Leak Sensor: Model ZW08 (on Box Label)
zigbeeNodeType: SLEEPY_END_DEVICE
application: 40
endpointId: 01
manufacturer: _TZ3000_it1hm1cr
model: TS0207
Raw Description 01 0104 0402 01 04 0001 0003 0500 0000 02 0019 000A
Tuya 1 Gang Switch: Model QS-Zigbee-CP01
application: 43
endpointId: 01
manufacturer: _TZ3000_tygpxwqa
model: TS0001
zigbeeNodeType: ROUTER
Raw Description 01 0104 0100 01 07 0003 0004 0005 0006 E000 E001 0000 02 0019 000A
Tuya 1 Gang Switch No Neutral: Model TMZ02L-16A
application: 43
endpointId: 01
manufacturer: _TZ3000_txpirhfq
model: TS0011
zigbeeNodeType: SLEEPY_END_DEVICE
Raw Description 01 0104 0100 01 07 0003 0004 0005 0006 E000 E001 0000 02 0019 000A
Tuya Temperature/Humidity Sensor: WSD500A A002 (on PCB)
application: 45
endpointId: 01
manufacturer: _TZ3000_bguser20
model: TS0201
zigbeeNodeType: SLEEPY_END_DEVICE
Raw Description 01 0104 0302 01 05 0001 0003 0402 0405 0000 03 0003 0019 000A
Tuya Power Plug with Power Monitor: Orange Ring
application: 44
endpointId: 01
firmwareFullVersion: 00000044
firmwareImageType: 54179
firmwareManufacturerCode: 4417
manufacturer: _TZ3000_gjnozsaz
model: TS011F
zigbeeNodeType: ROUTER
Raw Description 01 0104 010A 01 09 0003 0004 0005 0006 0702 0B04 E001 E000 0000 02 0019 000A
Linkind Motion Sensor: Model ZS110040078
application: 5D
endpointId: 01
manufacturer: lk
model: ZB-MotionSensor-D0003
zigbeeNodeType: SLEEPY_END_DEVICE
Raw Description 01 0104 0402 01 07 0000 0001 0003 0020 0500 0B05 FC81 01 0019
Thanks for your work.
Adde to battery voltage subdriver in this version
┌─────────────┬──────────────────────────────────────┐
│ Name │ Zigbee Contact Mc │
│ Version │ 2022-02-13T11:23:18.859882 │
└─────────────┴──────────────────────────────────────┘
As soon as I have some time I’ll do it. I have to do it for all the devices that use that profile.
I’ll let you know when it’s done, since it will be necessary to make a version with a manual update of the driver
1 Like
Hello Mariano
Other two zigbee devices.
Tuya Curtain Switch: Model QS-Zigbee-CP03
application: 40
endpointId: 01
manufacturer: _TZ3000_zirycpws
model: TS130F
zigbeeNodeType: ROUTER
Raw Description 01 0104 0202 01 05 0004 0005 0006 0102 0000 02 0019 000A
Tuya 4 Channel Switch with 433mhzRF: Model unknwow
application: 50
endpointId: 01
manufacturer: _TZ3000_excgg5kb
model: TS0004
onOff: catchall
zigbeeNodeType: ROUTER
Raw Description 01 0104 0100 01 07 0003 0004 0005 0006 E000 E001 0000 02 0019 000A
I wouldn’t bother you, but I can’t do it myself …
thanks
1 Like
@v.porsio,
Throughout the afternoon I will try to add the devices, there are just a few!
For the curtain controller I do not have a driver
many thanks!
If it helps at the moment I am using the Standard DHT Zigbee Curtain and the up, down and pause commands are working. Percentage doesn’t work
Added
┌─────────────┬──────────────────────────────────────┐
│ Name │ Zigbee Contact Mc │
│ Version │ 2022-02-13T18:06:12.314033 │
└─────────────┴──────────────────────────────────────┘
- id: "_TZ3000_oxslv1c9/Contact Sensor"
deviceLabel: TS0203 Contact Sensor
manufacturer: _TZ3000_oxslv1c9
model: TS0203
deviceProfileName: contact-battery-profile
Added
┌─────────────┬──────────────────────────────────────┐
│ Name │ Zigbee Switch Mc │
│ Version │ 2022-02-13T18:15:05.052075 │
└─────────────┴──────────────────────────────────────┘
- id: "_TZ3000_tygpxwqa/Switch"
deviceLabel: TZ3000 Switch
manufacturer: _TZ3000_tygpxwqa
model: TS0001
deviceProfileName: single-switch
- id: "_TZ3000_txpirhfq/Switch"
deviceLabel: TZ3000 Switch
manufacturer: _TZ3000_txpirhfq
model: TS0011
deviceProfileName: single-switch
Added to temp and Humidity
┌─────────────┬──────────────────────────────────────┐
│ Name │ Zigbee Temp Humidity Sensor Mc │
│ Version │ 2022-02-13T18:21:40.179007 │
└─────────────┴──────────────────────────────────────┘
- id: "_TZ3000_bguser20/TS0201"
deviceLabel: Tuya TS0201
manufacturer: _TZ3000_bguser20
model: TS0201
deviceProfileName: temp-humid-battery
Added to thermostat driver if you need it
┌─────────────┬───────────────────────────────────────┐
│ Name │ Zigbee Temp Sensor with Thermostat Mc │
│ Version │ 2022-02-13T18:24:04.362812 │
└─────────────┴───────────────────────────────────────┘
Added
┌─────────────┬──────────────────────────────────────┐
│ Name │ Zigbee Switch Power Mc │
│ Version │ 2022-02-13T18:26:37.942858 │
└─────────────┴──────────────────────────────────────┘
- id: "_TZ3000_gjnozsaz/TS011F"
deviceLabel: TS011F Plug
manufacturer: _TZ3000_gjnozsaz
model: TS011F
deviceProfileName: switch-power-energy-plug
Added
┌─────────────┬──────────────────────────────────────┐
│ Name │ Zigbee Motion Sensor Mc │
│ Version │ 2022-02-13T18:33:42.376543 │
└─────────────┴──────────────────────────────────────┘
- id: "ZB-MotionSensor-D0003/Motion"
deviceLabel: lk Motion Sensor
manufacturer: lk
model: ZB-MotionSensor-D0003
deviceProfileName: motion-battery
Added
┌─────────────┬──────────────────────────────────────┐
│ Name │ Zigbee Multi Switch Mc │
│ Version │ 2022-02-13T18:37:38.711454 │
└─────────────┴──────────────────────────────────────┘
- id: "TS0004/_TZ3000_excgg5kb"
deviceLabel: TS0004 Switch
manufacturer: _TZ3000_excgg5kb
model: TS0004
deviceProfileName: four-switch
I only have driver for ST moisture sensor
Great work, but i think that there is an error in unit of energy monitor
I can’t use 2,1 Mw 
the correct value should be 2.1 Kw
I need to set something in setting or you need to adjust in driver?
This is a bug in the default Edge libraries of firmware 41.x.
It’s supposed to be fixed soon
I used the groovy driver “SmartSense Moisture Sensor” con the sensor works well, could be useful?
Ok tomorrow I will do it, I have to create another new profile without temperature.
I’ll let you know when I have
1 Like