(EDGE Driver-Mc): Zigbee Drivers for Motion, Open/Close, Moisture, Smoke-Co Sensors and others Devices

Hi @DewDrop

I assume that you use the stock driver, it has the Switch category assigned to the profile and the App optional icons for that category do not include the plug icon.

It is incomprehensible that smartthings do not merge all the App optional icons of the Switch, SmartPlug and Light categories. This would give more flexibility to users and drivers could use a single profile instead of three or more different ones.

If you use the stock driver we can tag @nayelyz to see what they can do

Thank you

All working now.



Hi Mariano another fingerprint please add to the correct drive.thank you for your time.



I think I’m using your drivers right?


I have already use @ygerlovin driver and it works, but without childs.
I want to have separate components for the lights and to able to rename them from “switch 1,2,3” to convinient names.

Hopefully sometime in the future this will be possible.

1 Like

Hi @bega00

I have added it along with the other two Aqara models. If it doesn’t work, tell me to remove it from the driver, I won’t be able to do anything else

 Name         Zigbee Window Treatment Mc
 Version      2022-12-10T17:14:20.394643227        
- id: "LUMI/lumi.curtain.acn002"
    deviceLabel: Aqara Curtain Controller
    manufacturer: LUMI
    model: lumi.curtain.acn002

it doesn’t work for me, I’ll try again
it only goes open doesn’t close and doesn’t stop .
I turn it off from the button

1 Like

Can you please add:

Data * zigbeeNodeType: ROUTER

  • firmwareManufacturerCode: 4476
  • firmwareFullVersion: 00010012
  • application: 10
  • endpointId: 01
  • firmwareImageType: 8709
  • manufacturer: IKEA of Sweden
  • model: TRADFRIbulbE27WSglobeclear806lm
    Raw Description 01 0104 010C 01 09 0000 0003 0004 0005 0006 0008 0300 1000 FC57 01 0019


1 Like

Thanks! I added the Aqara roller shade driver with your driver.
The open/close and shade option works but it can’t get the device status.

Added to this driver version

 Name         Zigbee Light Multifunction Mc           
 Version      2022-12-11T11:17:51.094822025        
- id: "IKEA/TRADFRIbulbE27WSglobeclear806lm"
    deviceLabel: IKEA Bulb
    manufacturer: IKEA of Sweden
    model: TRADFRIbulbE27WSglobeclear806lm
    deviceProfileName: level-colortemp-2200-4000

Hi @kaveh_amouzgar

It appears because it cannot get the status of the Initialization capability.
It may be that this model does not support the initialization attribute and therefore that part does not work.

The only thing I did was add this model to the other two existing Aqara models and I already warned that if it didn’t work I couldn’t do anything.

If you send me the matchmaking logs, I could confirm if device support that initialization attribute or not and try to remove the capability from the profile if it don’t.

could you please add the following smart plug:

application: 45
endpointId: 01
manufacturer: _TZ3000_cphmq0q7
model: TS011F
zigbeeNodeType: ROUTER
Raw Description 01 0104 010A 01 09 0000 0003 0004 0005 0006 0702 0B04 E000 E001 02 0019 000A

it is a simple single-switch without power metering (as far as I can tell…)

is this what you are looking for?

Hi, how did you manage to add this and make it work?

I added it after scanning, and selected the driver but it won’t work. No open or close. Also get the same error as you regarding initialisation. I’m not bothered by the errors, just want this thing to work with the hub.

Was there a sequence in which you added this roller blind motor?

Looking forward to your reply.


I was referring to the logs obtained with the CLI during device pairing

This a tutorial to install CLI in a windows PC and see the driver logs

Hi @frayer

Added to this driver version.
I think can works with power and energy.
It has clusters 0702 and 0B04. Try it

 Name         Zigbee Switch Power Mc
 Version      2022-12-11T20:34:16.911802736        
- id: "_TZ3000_cphmq0q7/TS011F"
    deviceLabel: TS011F Plug
    manufacturer: _TZ3000_cphmq0q7
    model: TS011F
    deviceProfileName: switch-power-energy-plug


I wonder if you could kindly help me with this.

I’ve been trying to add the aqara roller blind e1 to the hub. I know people have gotten it to work. But mine just doesn’t seem get along.

I just checked the fingerprint files on your github, and it doesn’t show the above model on the yml file. Could this be the reason, why my blinds won’t work?


Hi @Nishantshekhar

The github file is not updated, today I added the model lumi.curtain.acn002 and I still don’t know if it works correctly or not.

Your device pairs with the controller and it doesn’t work or just won’t pair?

Hi @Mariano_Colmenarejo, the device pairs with the hub, and for the first time actually pairs as an aqara window treatment, but won’t respond to the commands.

However @kaveh_amouzgar has managed to get his working. So I’m wonder what is that I’m missing, that it won’t work :confused:

I’ve installed the driver from your github, and select it after pairing the motor, but the motor doesn’t respond. It’s just strange, I’ve read at least a few dozen posts of people who have managed to get it working with the edge beta drivers, but I’m not getting anywhere with it.


No, the github is not updated!
Install the driver from my shared channel