(EDGE Driver-Mc): Zigbee Drivers for Motion, Open/Close, Moisture, Smoke-Co Sensors and others Devices

Devices & Integrations Community Created Device Types
, , ,
2411

What devices are you referring to?

2412

@Mariano_Colmenarejo about this one.

2413

Well, I’m all ears so you can tell me where the sensitivity adjustment
I don’t know how to find it

2414

How can I help you with this “where” ?

Is there some hardware specification?

2415

I mentioned this, but anyone help me.
I am using multi switch driver mc, and in automations tab, in “THEN” dont have on, off options. Just have one option “turn on or turn off”

image
image1125×2436 159 KB

image
image1125×2436 185 KB

2416

I’m guessing you are on iOS? If you have access to an Android phone or Chrome book you will be able to
see them.

I have the same issue, see this thread, I have seen other users with the same issue.

2417

Hi @Mariano_Colmenarejo
Please could you add these bulbs to the light driver fingerprints? They’re all currently working with a stock DTH

manufacturer: IKEA of Sweden
model: TRADFRI bulb E27 W opal 1000lm

manufacturer: HZC
model: Dimmer-Switch-ZB3.0

And finally this one - same phsyical model as the first Ikea bulb, but has a different model name.

manufacturer: IKEA of Sweden
model: TRADFRI bulb E27 opal 1000lm

Thanks

2418

Hi @hellodave

are the ikea bulbs color temperature adjust?

2419

Sorry, this device TS0203 is a contact sensor no a motion sensor

2420

No, just dimming.

2421

Oh my gosh! I’ve referred the wrong device, this is the correct:

image

2422

Hi,

Please can you add this fingerprint for the Yagusmart single gang switch? I installed your zigbee multi switch and child driver and got my Yagusmart 2 gang working perfectly so huge thanks for this.

  • zigbeeNodeType: ROUTER
  • application: 50
  • endpointId: 01
  • manufacturer: _TZ3000_m0btfbt7
  • model: TS0001
  • onOff: catchall
2423

Hi there,
Another one to your endless driver . Please note ZLL profile ID. Zemismart 3 Gangs

Data
application: 09
endpointld: 01
manufacturer: TYZB01_gzhgaaqi
model: TS0003
zigbeeNodeType: ROUTER
Raw Description : 01 C05E 0000 01 07 0000 0004 0003 0006 0005 1000 0008 01 0000

2424

Hi @dotan_shai
Added to this driver version

───────────────────────────────────────────────────
 Name         Zigbee Multi Switch Mc
 Version      2022-09-28T18:27:16.42588024
───────────────────────────────────────────────────
─────────────────────────────────────────────────── 
 Name         Zigbee Multi Switch and Childs Mc    
 Version      2022-09-28T18:27:26.118580542        
───────────────────────────────────────────────────
  - id: "TS0003/TYZB01_gzhgaaqi"
    deviceLabel: TS0003 Switch
    manufacturer: TYZB01_gzhgaaqi
    model: TS0003
    deviceProfileName: three-switch
2425

Two gangs also… here are the details:

Data	
application: 09
endpointId: 01
manufacturer: _TYZB01_qcgw8qfa
model: TS0002
zigbeeNodeType: ROUTER
Raw Description	01 C05E 0000 01 07 0000 0004 0003 0006 0005 1000 0008 01 0000
2426

Added to this driver

───────────────────────────────────────────────────
 Name         Zigbee Multi Switch and Child Mc     
 Version      2022-09-28T19:08:46.052146745        
─────────────────────────────────────────────────── 
───────────────────────────────────────────────────
 Name         Zigbee Multi Switch Mc
 Version      2022-09-28T19:08:37.744925075        
───────────────────────────────────────────────────
  - id: "TS0002/_TYZB01_qcgw8qfa"
    deviceLabel: TS0002 Switch
    manufacturer: _TYZB01_qcgw8qfa
    model: TS0002
    deviceProfileName: two-switch
2427

@Dienzora

Install this driver,
uninstall device
open CLI to capture this driver log
reinstall device to see if this device support attribute *CurrentZoneSensitivityLevel
my models don’t support it

───────────────────────────────────────────────────
 Name         Zigbee Motion Sensor Test
 Version      2022-09-28T20:15:49.524623929
───────────────────────────────────────────────────
2428

hi
first of all, thank you very much for your work, and your great help.
I checked the drivers, tow gang works great.
But unfortunately three gang is not identified as a edge on st.
I think there was a mistake in the name of the manufacturer.
The correct name is _TYZB01_gzhgaaqi
Missing an underscore at the beginning.

2429

Sorry,
fixed in this driver version

─────────────────────────────────────────────────── 
 Name         Zigbee Multi Switch and Child Mc     
 Version      2022-09-28T20:48:08.627283111        
───────────────────────────────────────────────────
───────────────────────────────────────────────────
 Name         Zigbee Multi Switch Mc
 Version      2022-09-28T20:48:19.117826073        
───────────────────────────────────────────────────
  - id: "TS0003/_TYZB01_gzhgaaqi"
    deviceLabel: TS0003 Switch
    manufacturer: _TYZB01_gzhgaaqi
    model: TS0003
    deviceProfileName: three-switch
2430

It works:

2022-09-28T21:32:51.444153031+00:00 TRACE Zigbee Motion Sensor Test  Found ZigbeeMessageDispatcher handler in zigbee-motion
2022-09-28T21:32:51.450226364+00:00 INFO Zigbee Motion Sensor Test  Executing ZclClusterAttributeValueHandler: cluster: IASZone, attribute: CurrentZoneSensitivityLevel
2022-09-28T21:32:51.456733031+00:00 PRINT Zigbee Motion Sensor Test  currentZoneSensitivityLevel >>>>>>>>>	2
2022-09-28T21:32:51.461754364+00:00 DEBUG Zigbee Motion Sensor Test  TS0202 Motion Sensor device thread event handled
2022-09-28T21:32:53.545841032+00:00 TRACE Zigbee Motion Sensor Test  Received event with handler zigbee
2022-09-28T21:32:53.569951365+00:00 INFO Zigbee Motion Sensor Test  <ZigbeeDevice: 4eb01caa-12cb-41f0-bbbf-8e2621e8025f [0x6743] (TS0202 Motion Sensor)> received Zigbee message: < ZigbeeMessageRx || type: 0x00, < AddressHeader || src_addr: 0x6743, src_endpoint: 0x01, dest_addr: 0x0000, dest_endpoint: 0x01, profile: 0x0104, cluster: IASZone >, lqi: 0x8C, rssi: -65, body_length: 0x0007, < ZCLMessageBody || < ZCLHeader || frame_ctrl: 0x08, seqno: 0xA4, ZCLCommandId: 0x0A >, < ReportAttribute || < AttributeRecord || AttributeId: 0xF001, DataType: Uint8, Uint8: 0x00 > > > >
2022-09-28T21:32:53.666036699+00:00 DEBUG Zigbee Motion Sensor Test  TS0202 Motion Sensor device thread event handled
2022-09-28T21:32:53.680260365+00:00 TRACE Zigbee Motion Sensor Test  Received event with handler zigbee
2022-09-28T21:32:53.697587699+00:00 INFO Zigbee Motion Sensor Test  <ZigbeeDevice: 4eb01caa-12cb-41f0-bbbf-8e2621e8025f [0x6743] (TS0202 Motion Sensor)> received Zigbee message: < ZigbeeMessageRx || type: 0x00, < AddressHeader || src_addr: 0x6743, src_endpoint: 0x01, dest_addr: 0x0000, dest_endpoint: 0x01, profile: 0x0104, cluster: IASZone >, lqi: 0x8C, rssi: -65, body_length: 0x0007, < ZCLMessageBody || < ZCLHeader || frame_ctrl: 0x08, seqno: 0xA5, ZCLCommandId: 0x0A >, < ReportAttribute || < AttributeRecord || AttributeId: 0x0013, DataType: Uint8, CurrentZoneSensitivityLevel: 0x02 > > > >
2022-09-28T21:32:53.734618699+00:00 TRACE Zigbee Motion Sensor Test  Found ZigbeeMessageDispatcher handler in zigbee-motion
2022-09-28T21:32:53.801574365+00:00 INFO Zigbee Motion Sensor Test  Executing ZclClusterAttributeValueHandler: cluster: IASZone, attribute: CurrentZoneSensitivityLevel
2022-09-28T21:32:53.816757699+00:00 PRINT Zigbee Motion Sensor Test  currentZoneSensitivityLevel >>>>>>>>>	2
2022-09-28T21:32:53.821973032+00:00 DEBUG Zigbee Motion Sensor Test  TS0202 Motion Sensor device thread event handled
2022-09-28T21:32:54.358043366+00:00 DEBUG Zigbee Motion Sensor Test  TS0202 Motion Sensor device thread event handled
2022-09-28T21:32:54.882544032+00:00 TRACE Zigbee Motion Sensor Test  Received event with handler zigbee
2022-09-28T21:32:54.892062032+00:00 INFO Zigbee Motion Sensor Test  <ZigbeeDevice: 4eb01caa-12cb-41f0-bbbf-8e2621e8025f [0x6743] (TS0202 Motion Sensor)> received Zigbee message: < ZigbeeMessageRx || type: 0x00, < AddressHeader || src_addr: 0x6743, src_endpoint: 0x01, dest_addr: 0x0000, dest_endpoint: 0x01, profile: 0x0104, cluster: Basic >, lqi: 0x8C, rssi: -65, body_length: 0x0008, < ZCLMessageBody || < ZCLHeader || frame_ctrl: 0x18, seqno: 0x17, ZCLCommandId: 0x01 >, < ReadAttributeResponse || < AttributeRecord || AttributeId: 0x0001, ZclStatus: SUCCESS, DataType: Uint8, ApplicationVersion: 0x46 > > > >
2022-09-28T21:32:54.913264032+00:00 TRACE Zigbee Motion Sensor Test  Found ZigbeeMessageDispatcher handler in zigbee-motion
2022-09-28T21:32:54.919348699+00:00 INFO Zigbee Motion Sensor Test  Executing ZclClusterAttributeValueHandler: cluster: Basic, attribute: ApplicationVersion
2022-09-28T21:32:54.925353366+00:00 PRINT Zigbee Motion Sensor Test  Firmware >>>>>>>>>	70
2022-09-28T21:32:54.930519366+00:00 DEBUG Zigbee Motion Sensor Test  TS0202 Motion Sensor device thread event handled
2022-09-28T21:32:54.936866366+00:00 TRACE Zigbee Motion Sensor Test  Received event with handler zigbee
2022-09-28T21:32:54.945406699+00:00 INFO Zigbee Motion Sensor Test  <ZigbeeDevice: 4eb01caa-12cb-41f0-bbbf-8e2621e8025f [0x6743] (TS0202 Motion Sensor)> received Zigbee message: < ZigbeeMessageRx || type: 0x00, < AddressHeader || src_addr: 0x6743, src_endpoint: 0x01, dest_addr: 0x0000, dest_endpoint: 0x01, profile: 0x0104, cluster: IASZone >, lqi: 0x8C, rssi: -65, body_length: 0x0008, < ZCLMessageBody || < ZCLHeader || frame_ctrl: 0x18, seqno: 0x18, ZCLCommandId: 0x01 >, < ReadAttributeResponse || < AttributeRecord || AttributeId: 0x0013, ZclStatus: SUCCESS, DataType: Uint8, CurrentZoneSensitivityLevel: 0x02 > > > >