(EDGE Driver-Mc): Zigbee Drivers for Motion, Open/Close, Moisture, Smoke-Co Sensors and others Devices

I need see the installation logs to check what energy divisors send the device.
You can change driver to zigbee Thing Mc, prepare the cli to capture the installation log

1 Like

Hi @Dienzora

If you are referring to contact sensors, there are no sensitivity ranges, or it is open or closed.

If you mean motion sensors, that only depends on the hardware and software of the device itself and the driver will only be able to tell that specific device to use x or y sensitivity, depending on the options that the device offers.
The driver does not know about sensitivities, it only interprets the message, motion detected or motion not detected, that the device sends.

Hi @3asmarthome

Sorry,
I don’t think any of these devices will work with my drivers

Now I’m focused on helping users, who don’t have coding skills, to be able to use their devices with edge when they close groovy.

All the stock drivers and my zigbee drivers are published, if you think they can work with any of them you can try to adapt them, which is what I do and if you have any questions I will be happy to help you

Hi,

I’m referring about motion sensor, my devices has this sensitive capabilities but the driver has no this configuration.

Could your driver able it?

What devices are you referring to?

@Mariano_Colmenarejo about this one.

Well, I’m all ears so you can tell me where the sensitivity adjustment
I don’t know how to find it

How can I help you with this β€œwhere” ?

Is there some hardware specification?

I mentioned this, but anyone help me.
I am using multi switch driver mc, and in automations tab, in β€œTHEN” dont have on, off options. Just have one option β€œturn on or turn off”


I’m guessing you are on iOS? If you have access to an Android phone or Chrome book you will be able to
see them.

I have the same issue, see this thread, I have seen other users with the same issue.

Hi @Mariano_Colmenarejo
Please could you add these bulbs to the light driver fingerprints? They’re all currently working with a stock DTH

manufacturer: IKEA of Sweden
model: TRADFRI bulb E27 W opal 1000lm
manufacturer: HZC
model: Dimmer-Switch-ZB3.0

And finally this one - same phsyical model as the first Ikea bulb, but has a different model name.

manufacturer: IKEA of Sweden
model: TRADFRI bulb E27 opal 1000lm

Thanks

Hi @hellodave

are the ikea bulbs color temperature adjust?

Sorry, this device TS0203 is a contact sensor no a motion sensor

No, just dimming.

Oh my gosh! I’ve referred the wrong device, this is the correct:

image

Hi,

Please can you add this fingerprint for the Yagusmart single gang switch? I installed your zigbee multi switch and child driver and got my Yagusmart 2 gang working perfectly so huge thanks for this.

  • zigbeeNodeType: ROUTER
  • application: 50
  • endpointId: 01
  • manufacturer: _TZ3000_m0btfbt7
  • model: TS0001
  • onOff: catchall

Hi there,
Another one to your endless driver . Please note ZLL profile ID. Zemismart 3 Gangs

Data
application: 09
endpointld: 01
manufacturer: TYZB01_gzhgaaqi
model: TS0003
zigbeeNodeType: ROUTER
Raw Description : 01 C05E 0000 01 07 0000 0004 0003 0006 0005 1000 0008 01 0000

Hi @dotan_shai
Added to this driver version

───────────────────────────────────────────────────
 Name         Zigbee Multi Switch Mc
 Version      2022-09-28T18:27:16.42588024
───────────────────────────────────────────────────
─────────────────────────────────────────────────── 
 Name         Zigbee Multi Switch and Childs Mc    
 Version      2022-09-28T18:27:26.118580542        
───────────────────────────────────────────────────
  - id: "TS0003/TYZB01_gzhgaaqi"
    deviceLabel: TS0003 Switch
    manufacturer: TYZB01_gzhgaaqi
    model: TS0003
    deviceProfileName: three-switch

Two gangs also… here are the details:

Data	
application: 09
endpointId: 01
manufacturer: _TYZB01_qcgw8qfa
model: TS0002
zigbeeNodeType: ROUTER
Raw Description	01 C05E 0000 01 07 0000 0004 0003 0006 0005 1000 0008 01 0000

Added to this driver

───────────────────────────────────────────────────
 Name         Zigbee Multi Switch and Child Mc     
 Version      2022-09-28T19:08:46.052146745        
─────────────────────────────────────────────────── 
───────────────────────────────────────────────────
 Name         Zigbee Multi Switch Mc
 Version      2022-09-28T19:08:37.744925075        
───────────────────────────────────────────────────
  - id: "TS0002/_TYZB01_qcgw8qfa"
    deviceLabel: TS0002 Switch
    manufacturer: _TYZB01_qcgw8qfa
    model: TS0002
    deviceProfileName: two-switch