Dryer notification based on temperature?

[Danabw (Dana)]

I have core set up to wait for a “button press” from the modified HEM DTH that treats the HEM like a two-button device, with watts settings to “push” or “hold” each button.

If button 1 (clamp 1, on the washer line) goes to 10 watts (which it does at the start of a new load) the HEM reports a “press” of virtual button 1. My piston is set to start a timer when that push occurs, and then send me a text after 45 minutes.

I haven’t actually used the piston yet (no dirty laundry) but expect it to work…

This is the HEM DTH I use, developed by others, minor modifications by me. It reads clamps separately, and makes the clamp appear like a virtual two-button device, so you can wait for button presses that occur based on settings in the DTH to push or hold the devices’ two virtual buttons based on watts readings.

Aeon Home Energy Meter v1 -- Read Clamps Separately

@MEarly; @ogiewon, @Omyn, @Jmtyra, and anyone else who is interested! I’ve got my washer and dryer CoRE pistons set up and working and receive washer and dryer notifications, and they appear to work properly. I’ve edited the DTH to label all the settings that have been appearing in Preferences (some were blank, no labels) and fixed a few errors in my code (I think! ) where I had not updated things properly. I’d still like to do a couple more updates: Add reporting frequency (currently managed in the Configuration section of the code) to the Preferences - don’t know how (or if it’s possible) to do that. ID what kWhDelay and detailDelay settings do - I don’t understand what they affect. If kWhDelay and deatilDelay aren’t useful for users to edit, remove them from Preferenc…