Dispaly HASS device in ST using MQTT?

[JDRoberts]

[OBSOLETE] MQTT Bridge [device + app]

Hey everyone, A fellow-SmartThing owner and I built a system to bridge MQTT and SmartThings! It allows two-way communication of SmartThings device attributes with other MQTT interfaces. For example, if I have a Z-Wave Dimmer Lam in SmartThings called “Fireplace Lights” it would transmit and subscribe on the following topics: # Brightness (0-99) /SmartThings/Fireplace Lights/level # Switch State (on|off) /SmartThings/Fireplace Lights/switch The architecture is pretty simple, it works via a SmartApp, DeviceHandler, and a Web Service (running via Docker). Our main goal was to be able to use Home Assistant with our existing SmartThings ecosystem. And we easily got it to work! Check it out and give us feedback.

Or

A little guide on integrating smartthings and homeassistant (hassbian)

Here is a guide on integrating smartthings and homeassistant (hassbian) I tried many guides that just didn’t work, so after a lot off time trying to get this to work i figured i can save someone else all that hassle i hade. 1: grab your raspberry pi 3b and install Hassbian using Etcher Link: https://www.home-assistant.io/docs/installation/hassbian/installation/ Link:https://etcher.io/ 2: download a ssh: Putty Link:https://www.putty.org/ 3: check what ip that your raspberry have: You can do this by entering your router or use your phone and Fing app, or use: https://www.advanced-ip-scanner.com/ 4: start putty, enter the ip of your raspberry pi: exempel: 192.168.1.33 5: in the console window: enter: pi as user and: raspberry as password 6: now type: passwd and enter the default p…