Dashboard to Display Aeon Sensor Data

[Griffiths415 (John Griffiths)]

My Aeon Smart sensor is working great, but would be good to do some thing with the data its aquirers.

It would be nice if I could have a dash board to see the average temp, light, humidity

Searched, but don’t see any avalaible. Anyone know of such a took?

John

[DinnerYeti (Josh)]

There are 2 well developed Dashboards currently being used for Smartthings.

The Home Automation Dashboard (a little involved to get setup and working, but very customizable):

Home Automation Dashboard (HAD)

All the lights in my house are controllable through SmartThings, but not all of them are wired up to wall switches. I do have a bunch of floor and table lamps, which are hooked up to GE receptacles and plug-in lamp modules. It’s a bit of a PITA to have to bend down to actuate the modules. Whipping out my phone to launch the SmartThings Mobile app to control the lights can be cumbersome and slow, and I’m not a big fan of the idea of having physical remotes floating around the house. I wanted a solution with the immediacy of a physical switch, but some of the flexibility of the mobile app. Here is what I came up with: [image] Hardware This is essentially a wall mounted Nexus 7 Android tablet, which I was able to acquire for cheap. I built a custom frame using a laser cut premium walnut ve…

And the ActiON Dashboard which is a little less customizable, but much simpler to setup:

ActiON Dashboard 4.6.3 is here! (Now SmartTiles.click)

http://action-dashboard.github.io Visit project’s home page to download SmartApp and view installation instructions. [image] What is it? ActiON Dashboard is a fast and light web client for SmartThings. It is designed to run in any modern browser, regardless of operating system or screen size. ActiON Dashboard SmartApp easily installs in 2 minutes. Create as many instances as you need and pick relevant devices for each dashboard. ActiON Dashboard has no dependency on the SmartThings Mobile app or third party services. What is it for? Install as a native app to your smartphone to for a quick, user friendly access to your devices. Install on a wall-mounted tablet as a whole-house control panel. Create dashboards, as needed, for your family and friends and decide what they are allowe…

I havent tried getting the Humidity and temp in to the Action dashboard yet, but its a breeze in the HA Dashboard (once you get it running).

hope that helps.

[ehaseltine (Eric)]

There are a couple of ideas on the forum, but I went with GroveStreams:

GroveStreams SmartApp

Hi, www.grovestreams.com is a service that will graph your devices and let you build a dashboard. Here’s my SmartApp, adapted from @florianz ThingSpeak app to let you connect your devices to GroveStreams. You’ll need a free account first, when your create one it will prompt you for an organisation name - you can enter something like “Home”. Once you have created your organisation you need to get the “Feed PUT API key”: [image] It’s long… you might want to email this to your phone so that you can cut and paste it into the ST app. The SmartApp uses the device name as the “Component” in GroveStreams and the capability attribute (e.g. “temperature”) becomes a “Stream” in GroveStreams. These will be auto created so you don’t need to set them up in GroveStreams. However, once they have been…

I’ve only had it setup for about a day, but so far really like it.