AD2SmartThings

[ritchierich (Michael)]

Nate, the SHM API is undocumented. I stumbled upon the API calls to sync the two states and I haven’t seen anything that specifically says the smoke has alarmed. If you do find anything please let me know and I am happy to help improve the integration.

I have connected smoke alarms and followed this thread to integrate mine with ST:

Connected Smoke Alarms

My weekend project was to integrate my hardwired, inter-connected smoke alarms with Smart Things. I used a post from the Vera forums as a guide My alarms are made by Kiddie, so I got the appropriate relay for my system (Kiddie SM120x) and the Schlage RS100HC door sensor. I paired the Schlage sensor with the ST hub and it was recognized right away, although I did have to log into the web I.D.E. and change the device type to “Schlage Contact Sensor” to get it report properly. I saved the magnet for the sensor for future projects because it is not needed. I have access to one of the Smoke Alarms in my basement, so I mounted another electrical box about a foot away and ran 14-3 wiring. I hooked the black (line), white (neutral), red (inter-connect) of the relay to the new wire I ran from t…

I took this one step further and added another zone to my Vista panel called house smokes and hooked up my Kiddie relay to this zone. Now when my Kiddie smokes alarm they make my Vista panel alarm and ADT gets notified.