Pentair ScreenLogic for my pool system
I do not seew the Fibaro dimmer 2 (FGD-212) in the list. This dimmer uses z-wave+ protocol.
The dimmer that is in the list is not sold anymore.
Apologies if this has been asked before but, would it be possible to add SALUS IT500 integration into the Smartthings hub?
Many Thanks In Advance
I would like to see a I/O hub which will take inputs from wired sensors such as window and door sensors previously used for an existing ADT hard wired system and outputting via z-wave to the smart things hub. It would really only need to do a simple open/closed signal. Would be nice if it had 10 inputs.
I know this is a really old post, but if you’re still waiting for the Remotec ZXT-310, it’s a great product and I’ve created a DTH for it.
I didn’t implement the database of IR codes because most of the list is for TVs and it doesn’t include codes for any of the devices I own. Another reason I didn’t implement it is that changing the code list number for a channel wipes out all the custom codes learned for that channel and I think those are a lot more important.
Universal remotes are a lot cheaper so instead of trying to implement a fully functional remote I focused on making it usable with SHM and Smart Lighting.
I have done this with the ecolink or Schlage door sensors. I removed the old alarm panel keeping track of which wires went where and attached 1 of the z-wave door sensors to each zone (they have a wired attachment point inside the sensor). Then lined them all up in the box and paired them into Smartthings.
I even removed the 2 keypad panels in the house and replaced them with iPad minis in flush wall mounts that run Action Tiles (formerly Smart Tiles) so that I can still use it as a security panel with the bonus of controlling other items as well. It was a little tricky to power them, but my original alarm power box had an outlet so I plugged in 12v wall transformer in and wired it to the low voltage wiring that went to the keypad panel. At the panel, I soldered the 12v wires to a car lighter USB power plug and plugged the factory iPad USB cable into it and presto! You can do the same with the motion detector wires and power a Aeon 6 way motion sensor (without having to use battery power) if you want to keep that functionality.
It’s a little bit of monkeying around but it works pretty good.
I have had a Beddit 3 for a while now and I’m loving it! I would love to see an integration with SmartThings that would allow me to take advantage of some of the SmartApps I’ve seen that connect with sleep tracking devices. Thanks!
Here’s a link to their API: https://github.com/beddit/beddit-api
Is integration with Bosch’s Home Connect service in the pipeline?
We’ve got a compatible Siemens Dishwasher and Washing Machine we’d like to connect to SmartThings but the production API is only available to commercial partners at the moment.
Check out this solution using a NodeMCU ESP8266. I’ve set this up to reuse all my security sensors and siren. If you want to have 10 devices hooked up, you’ll need to set up 2 ESPs, but that’s not a big deal. (It uses wifi, not Zwave to talk to ST though.)
Thank you. I will review this solution.
Plum support for smartthings has been announced and is coming soon, these are looking really nice!
Have just installed the same FFRC0833R1 AC unit from Frigidaire. WiFi option works well from their proprietary app, but would love to see SmartThings integration.
They have their own Alexa skill now, so I have found that helpful.
But Frigidaire seems to want to keep their API closed. They don’t have an IFTTT channel, either.
Some people have gone as far as setting up an echo dot with an android Device next to it and automate having the android device say something to the echo. That’s pretty clunky, but it does work.
+1 Broadlink RM2 native support rather than through RMBridge+old android phone.
It’s probably been mentioned but Phillips Hue motion sensor. The custom DH is unreliable for daily use, unfortunately. Official integration would be much more useful.
Nuzzle pet collar. I just got mine today and I’m loving it so far. It has a Sim card installed and keeps track of my dogs location at all times, without a monthly cost. I’m thinking a life 360 type connection would be wonderful.
Is nobody looking at Hydrawise irrigation integration?
I agree with sgnihttrams that it is a great sprinkler controller. The company was taken over by Hunter, so a lot of momentum behind them! I have a 12 station unit with flow meter and use two valves for doing partial water replacements of my fish tanks. Overflow water go to garden beds as well. I’m not sure what functionality is available through the Hydrawise API but I could force some manual watering if very hot. My Netatmo is connected through Weather Underground and ST, so a lot of information. If anyone wants to start on a smart app, I am a willing tester!
@ddemoss - Daniel, did you make any progress with the integration of the beddit 3? I’m looking for an integration solution for it also.
Unfortunately, I haven’t heard anything on this. I’m somewhat techie, but not a programmer, so I haven’t tried anything myself.