Does anyone know of a device that would accept input from hard-wired open/close sensors and relay those over z-wave or zigbee to the ST hub? My house is already wired, but I no longer subscribe to the monitoring service. So I’ve currently got all these wires from the sensors coming into one place,…

Lots of info in this thread: [image] Hardwired sensors Connected Things Is there any zwave / zigbee device which can be used to connect hardwired contact , motion sensors ? My house is already fitted with hardwired sensors on each door and window and multiple motion senso…

Daniel, This is probably not what you want but this was what I did as an alternative. I thought about incorporating my security system into ST but with all the downtime issues ST has been having I decided against it. Instead I installed an Envisalink 3 module in my alarm panel ($86). You need to co…

There is no off-the-shelf solution, but you can build something with arduino. The trick is you have to monitor for voltage changes, not simple open/closed contact. Depending on what panel you have, you might be able to integrate that. There are lots of threads on that topic on this board, but the…

If you have only 1 or 2 open/close sensor(s) you want to “bridge” to ST, you could use the Z-wave FIBARO DOOR / WINDOW SENSOR FGK-101 which supports one such (shorted / open) contact. But if you have multiple contacts, that would be very expensive (about $50 per contact), so if you can handle it, g…

ST-compatible "Hub" or bridge for existing hardwired security sensors?

Devices & Integrations Connected Things

davglass (Dav Glass) May 6, 2015, 1:00pm 2

Lots of info in this thread:

Topic		Replies	Views
Hardwired sensors Connected Things	89	59171	September 8, 2018
Integrating with Home Alarm Devices & Integrations	15	3978	December 15, 2015
Connecting Existing Open/Close Sensors To New SmartThings Hub Devices & Integrations	2	4990	December 12, 2014
Howto use existing wired door and window contacts for alarm? Devices & Integrations	1	1265	September 29, 2015
Would this work to integrate into an existing wired security system? Devices & Integrations	3	1298	January 12, 2016

ST-compatible "Hub" or bridge for existing hardwired security sensors?

Related topics