[RELEASE] Lock User Unlock/Lock Door Notifications and Actions

We can add the request to our feature list Mike but it’s very easy to find out the timestamps for events. Open you lock device page on the ST mobile app, click on Recently and you’ll see the list of lock/unlock events with timestamps. For SMS notifications your mobile app should also provide timestamps of when they received. The ordering will be the same as what’s reported by your lock. (sometimes these are delayed/buffered by the lock)

You’re too fast, I just came back here to update my request :grin:

The downside of relying on the SMS client is that if the phone was off at the time the SMS came in, it shows the “received” time as whenever I booted the phone up and the SMS came in (not when it was sent).

The additional question I came back here to add - should I be able to do the following?:

  • Slave unlock door A when door B is unlocked
  • Slave lock door A x minutes after door B was locked
  • Lock door A x minutes after door A was closed

Thanks again.

CoRE is your best friend here for custom actions

Thanks. I keep saying I’ll try it out, maybe one day I will :grinning:

User Unlock/Lock Door Notifications and Actions - Version 03.06.00

  • Safety check, notify user if hardware AutoLock is enabled when trying to use SmartApp AutoRelock and AutoUnlock features
  • Added support for mode based notifications

Recommend use the [Universal Enhanced Z-Wave Lock] ([RELEASE] Universal Enhanced Z-Wave Lock Driver for Schlage, Yale, Kwikset, IDLock, Popp, Danalock, August Pro, Keywe, Philia, Samsung) device handler version 03.04.00 or newer for full SmartApp and automatic update notification functionality

1 Like

User Unlock/Lock Door Notifications and Actions - Version 03.07.00

  • Added support for arming Smart Home Monitor (SHM) as part of the Lock actions
  • Added support for Delay Actions, when locked via the Keypad, you can now have the system wait before running actions (allows for folks to exit the house before arming the security system or turning off lights, etc)
  • Simplified the user interface

Key features of the SmartApp:

  • Monitor unlimited users and locks
  • Works with the built in SmartThings device handler
  • Easy and intuitive setup
  • Support for different types of locks (keypad, bluetooth, RFID, etc)
  • Define custom individual Unlock AND Lock actions for users such as:
    • Exit delay actions (wait for X minutes before running actions)
    • Running routines
    • Changing modes
    • Arming/Disarming SHM
    • Turning on lights if it’s dark outside
    • Turning on/off switches
    • Define rules when to run and not run actions
    • Notifications on type of lock/unlock (manual, code, keypad, bluetooth, rfid etc)
  • Define Door Open/Close actions such as
    • Automatically relocking the door when it’s closed
    • Automatically unlocking the deadbolt if it’s extended, while door is open
    • Ringing chimes when door is opened
    • Notifications if door is left open
    • Define actions for each door separately
  • and lots more…

Some of the advanced features require use of the Universal Enhanced Z-Wave Lock device handler (the app will notify you when required), most features are available with the stock SmartThings Z-Wave device handler.

If you’re using a ZigBee lock, we recommend the awesome Universal ZigBee Lock device handler from @jhamstead

Copyright (c) RBoy Apps

1 Like

Still no user specific notifications after last few updates. Spoke to ST support and they told me they don’t support 3rd party apps and that they have SmartLocks now and I should us it instead. Any support here or should I abandon hope. I’m open to send any logs that might help. I only get electronicly locked or unlocked messages.

Not an issue, we can get to the bottom of this, it’s likely a configuration issue. Please eMail our support team screenshots of your SmartApp settings pages (all pages if you can grab them). Then open IDE Live Logging, unlock your door using your code, capture the debug messages from your lock and smartapp, please separate them by clicking on the name of the SmartApp and the Lock in the ide logging page (it’ll automatically filter them for you) so we can analyze them. Lets find out why smartthings doesn’t seem to want to tell you about your users.

Hi, is it possible trigger the build in alarm in the door lock when after 3 try?

That’s a lock feature cannot be controlled by the SmartApp. Some locks allow you to configure the number to invalid tries but that is again managed by the Device Handler. Once the lock reports the invalid entry, the SmartApp will alert the user.

Now all features are compatible with the stock SmartThing Z-Wave and ZigBee device handlers

User Unlock/Lock Door Notifications and Actions - Version 04.00.00

  • Compatible with the new SmartThings Z-Wave and ZigBee device handlers
  • Added support for running custom actions on Manual Unlocking and Manual Locking (with delayed actions option)
  • Code based locking (and actions) now works with the stock SmartThings Z-Wave and ZigBee device handlers

Key features of the SmartApp:

  • Monitor unlimited users and locks
  • Works with the built in SmartThings device handler
  • Easy and intuitive setup
  • Support for different types of locks (keypad, bluetooth, RFID, etc)
  • Define custom individual Unlock AND Lock actions for users such as:
    • Exit delay actions (wait for X minutes before running actions)
    • Separate actions for Keypad and Manual locking/unlocking and per door actions
    • Running routines
    • Changing modes
    • Arming/Disarming SHM
    • Turning on lights if it’s dark outside
    • Turning on/off switches
    • Define rules when to run and not run actions
    • Notifications on type of lock/unlock (manual, code, keypad, bluetooth, rfid etc)
  • Define Door Open/Close actions such as
    • Automatically relocking the door when it’s closed
    • Automatically unlocking the deadbolt if it’s extended, while door is open
    • Ringing chimes when door is opened
    • Notifications if door is left open
    • Define actions for each door separately
  • and lots more…

Copyright © RBoy Apps

2 Likes

Now all features are compatible with the stock SmartThing Z-Wave and ZigBee device handlers

User Unlock/Lock Door Notifications and Actions - Version 04.00.01

  • Fix for notifications when manual unlock actions are executed

Key features of the SmartApp:

  • Monitor unlimited users and locks
  • Works with the built in SmartThings device handler
  • Easy and intuitive setup
  • Support for different types of locks (keypad, bluetooth, RFID, etc)
  • Define custom individual Unlock AND Lock actions for users such as:
    • Exit delay actions (wait for X minutes before running actions)
    • Separate actions for Keypad and Manual locking/unlocking and per door actions
    • Running routines
    • Changing modes
    • Arming/Disarming SHM
    • Turning on lights if it’s dark outside
    • Turning on/off switches
    • Define rules when to run and not run actions
    • Notifications on type of lock/unlock (manual, code, keypad, bluetooth, rfid etc)
  • Define Door Open/Close actions such as
    • Automatically relocking the door when it’s closed
    • Automatically unlocking the deadbolt if it’s extended, while door is open
    • Ringing chimes when door is opened
    • Notifications if door is left open
    • Define actions for each door separately
  • and lots more…

Copyright © RBoy Apps

Now all features are compatible with the stock SmartThing Z-Wave and ZigBee device handlers

User Unlock/Lock Door Notifications and Actions - Version 04.00.03

  • Improvements for changes in ST Mobile app layout
  • Prompt user about maximum number of slots supported by the locks
  • Support for new/old stock/enhanced lock device handlers

Key features of the SmartApp:

  • Monitor unlimited users and locks
  • Works with the built in SmartThings device handler
  • Easy and intuitive setup
  • Support for different types of locks (keypad, bluetooth, RFID, etc)
  • Define custom individual Unlock AND Lock actions for users such as:
    • Exit delay actions (wait for X minutes before running actions)
    • Separate actions for Keypad and Manual locking/unlocking and per door actions
    • Running routines
    • Changing modes
    • Arming/Disarming SHM
    • Turning on lights if it’s dark outside
    • Turning on/off switches
    • Define rules when to run and not run actions
    • Notifications on type of lock/unlock (manual, code, keypad, bluetooth, rfid etc)
  • Define Door Open/Close actions such as
    • Automatically relocking the door when it’s closed
    • Automatically unlocking the deadbolt if it’s extended, while door is open
    • Ringing chimes when door is opened
    • Notifications if door is left open
    • Define actions for each door separately
  • and lots more…

Copyright © RBoy Apps

Now all features are compatible with the stock SmartThing Z-Wave and ZigBee device handlers

User Unlock/Lock Door Notifications and Actions - Version 04.01.00

  • Added support to unlock and lock secondary locks when the primary lock is unlocked/locked (for double/multiple door entryways)
  • Added support to open/close garage doors when lock is unlocked/unlocked
  • Added support for changing modes on keypad/manual locks
  • Door sensor is now optional for timed auto relocking

Key features of the SmartApp:

  • Monitor unlimited users and locks
  • Works with the built in SmartThings device handler
  • Easy and intuitive setup
  • Support for different types of locks (keypad, bluetooth, RFID, etc)
  • Define custom individual Unlock AND Lock actions for users such as:
    • Exit delay actions (wait for X minutes before running actions)
    • Separate actions for Keypad and Manual locking/unlocking and per door actions
    • Turning on lights if it’s dark outside
    • Unlocking/locking secondary locks
    • Opening/closing garage doors
    • Notifications on type of lock/unlock (manual, code, keypad, bluetooth, rfid etc)
    • Running routines
    • Changing modes
    • Arming/Disarming SHM
    • Turning on/off switches
    • Define rules when to run and not run actions
  • Define Door Open/Close actions such as
    • Automatically relocking the door when it’s closed
    • Automatically unlocking the deadbolt if it’s extended, while door is open
    • Ringing chimes when door is opened
    • Notifications if door is left open
    • Define actions for each door separately
  • and lots more…

Copyright © RBoy Apps

Now all features are compatible with the stock SmartThing Z-Wave and ZigBee device handlers

User Unlock/Lock Door Notifications and Actions - Version 04.02.03

  • Improved user configuration page flow - more untuitive
  • Added support to arm to SHM Stay
  • Workaround for platform not saving sms numbers

Key features of the SmartApp:

  • Monitor unlimited users and locks
  • Works with the built in SmartThings device handler
  • Easy and intuitive setup
  • Support for different types of locks (keypad, bluetooth, RFID, etc)
  • Define custom individual Unlock AND Lock actions for users such as:
    • Exit delay actions (wait for X minutes before running actions)
    • Separate actions for Keypad and Manual locking/unlocking and per door actions
    • Turning on lights if it’s dark outside
    • Unlocking/locking secondary locks
    • Opening/closing garage doors
    • Notifications on type of lock/unlock (manual, code, keypad, bluetooth, rfid etc)
    • Running routines
    • Changing modes
    • Arming/Disarming SHM
    • Turning on/off switches
    • Define rules when to run and not run actions
  • Define Door Open/Close actions such as
    • Automatically relocking the door when it’s closed
    • Automatically unlocking the deadbolt if it’s extended, while door is open
    • Ringing chimes when door is opened
    • Notifications if door is left open
    • Define actions for each door separately
  • and lots more…

Copyright © RBoy Apps

@chippie the via RFID text has been corrected and capitalized, thanks for reporting it. You can find the changes in version 04.02.04

The name of the user will only get printed in the notification tab by the SmartApp.
The recently tab is only accessible by the DTH and since this app doesn’t use the DTH to program the codes the DTH is unaware of the code names.

1 Like

Now all features are compatible with the stock SmartThing Z-Wave and ZigBee device handlers
After updating the code please open the SmartApp and click on Save for the new features to take effect

User Unlock/Lock Door Notifications and Actions - Version 04.03.00

  • Added support for custom user notification settings
  • Added support for keypads
  • Added support for limiting number of notifications per user

Key features of the SmartApp:

  • Monitor unlimited users and locks
  • Works with the built in SmartThings device handler
  • Easy and intuitive setup
  • Support for different types of locks (keypad, bluetooth, RFID, etc)
  • Define custom individual Unlock AND Lock actions for users such as:
    • Exit delay actions (wait for X minutes before running actions)
    • Separate actions for Keypad and Manual locking/unlocking and per door actions
    • Turning on lights if it’s dark outside
    • Unlocking/locking secondary locks
    • Opening/closing garage doors
    • Notifications on type of lock/unlock (manual, code, keypad, bluetooth, rfid etc)
    • Running routines
    • Changing modes
    • Arming/Disarming SHM
    • Turning on/off switches
    • Custom notifications settings (who and how many)
    • Define rules when to run and not run actions
  • Define Door Open/Close actions such as
    • Automatically relocking the door when it’s closed
    • Automatically unlocking the deadbolt if it’s extended, while door is open
    • Ringing chimes when door is opened
    • Notifications if door is left open
    • Define actions for each door separately
  • and lots more…

Copyright © RBoy Apps

Now all features are compatible with the stock SmartThing Z-Wave and ZigBee device handlers and Keypad Locks

User Unlock/Lock Door Notifications and Actions - Version 04.04.00

  • Added support for arming/disarming ST ADT panel as lock/unlock actions (including syncing when with external keypads)

Key features of the SmartApp:

  • Monitor unlimited users and locks
  • Works with the built in SmartThings device handler
  • Easy and intuitive setup
  • Support for different types of locks (keypad, bluetooth, RFID, etc)
  • Define custom individual Unlock AND Lock actions for users such as:
    • Exit delay actions (wait for X minutes before running actions)
    • Separate actions for Keypad and Manual locking/unlocking and per door actions
    • Turning on lights if it’s dark outside
    • Unlocking/locking secondary locks
    • Opening/closing garage doors
    • Notifications on type of lock/unlock (manual, code, keypad, bluetooth, rfid etc)
    • Running routines
    • Changing modes
    • Arming/Disarming SHM/ADT
    • Turning on/off switches
    • Custom notifications settings (who and how many)
    • Define rules when to run and not run actions
  • Define Door Open/Close actions such as
    • Automatically relocking the door when it’s closed
    • Automatically unlocking the deadbolt if it’s extended, while door is open
    • Ringing chimes when door is opened
    • Notifications if door is left open
    • Define actions for each door separately
  • and lots more…

Copyright © RBoy Apps

Now all features are compatible with the stock SmartThing Z-Wave and ZigBee device handlers and Keypad Locks

User Unlock/Lock Door Notifications and Actions - Version 04.04.02

Key features of the SmartApp:

  • Monitor unlimited users and locks
  • Works with the built in SmartThings device handler
  • Easy and intuitive setup
  • Support for different types of locks (keypad, bluetooth, RFID, etc)
  • Define custom individual Unlock AND Lock actions for users such as:
    • Exit delay actions (wait for X minutes before running actions)
    • Separate actions for Keypad and Manual locking/unlocking and per door actions
    • Turning on lights if it’s dark outside
    • Unlocking/locking secondary locks
    • Opening/closing garage doors
    • Notifications on type of lock/unlock (manual, code, keypad, bluetooth, rfid etc)
    • Running routines
    • Changing modes
    • Arming/Disarming SHM/ADT
    • Turning on/off switches
    • Custom notifications settings (who and how many)
    • Define rules when to run and not run actions
  • Define Door Open/Close actions such as
    • Automatically relocking the door when it’s closed
    • Automatically unlocking the deadbolt if it’s extended, while door is open
    • Ringing chimes when door is opened
    • Notifications if door is left open
    • Define actions for each door separately
  • and lots more…

Copyright © RBoy Apps

1 Like

Compatible with the stock SmartThing Z-Wave and ZigBee device handlers and Keypad Locks

User Unlock/Lock Door Notifications and Actions - Version 04.05.00

    • Create custom keypad lock actions when using arming keypads for away/stay/night buttons
    • Run routines
    • Change modes
    • Turn switches on/off
    • Lock other locks
    • Close garage doors
  • Synchronize keypad (button lights) with SHM/ADT changes when Control SHM/ADT using keypad is enabled
  • Check for mode changes in real time when sending open door notifications

Key features of the SmartApp:

  • Monitor unlimited users and locks
  • Works with the built in SmartThings device handler
  • Easy and intuitive setup
  • Support for different types of locks (keypad, bluetooth, RFID, etc)
  • Define custom individual Unlock AND Lock actions for users such as:
    • Exit delay actions (wait for X minutes before running actions)
    • Separate actions for Keypad and Manual locking/unlocking and per door actions
    • Create custom actions for security Keypad away/stay/night buttons
    • Turning on lights if it’s dark outside
    • Unlocking/locking secondary locks
    • Opening/closing garage doors
    • Notifications on type of lock/unlock (manual, code, keypad, bluetooth, rfid etc)
    • Running routines
    • Changing modes
    • Arming/Disarming SHM/ADT
    • Turning on/off switches
    • Custom notifications settings (who and how many)
    • Define rules when to run and not run actions
  • Define Door Open/Close actions such as
    • Automatically relocking the door when it’s closed
    • Automatically unlocking the deadbolt if it’s extended, while door is open
    • Ringing chimes when door is opened
    • Notifications if door is left open
    • Define actions for each door separately
  • and lots more…

Copyright © RBoy Apps

1 Like