Post Requests for Zigbee Edge Drivers Here (community-created)

[TapioX]

SmartThings Zigbee Button Edge Driver

Could you please add fingerprints to Zigbee Button driver for Ecosmart 4-button remote? I have a different version from Ecosmart; it is under “Airam” brand in Finland. The remote worked with Ecosmart 4-button remote datahandler without problems. Device Info: Manufacturer: C046 Model: ZBT-Remote-EU-DIMV1A2 ZigbeeNodeType: SLEEPY_END_DEVICE Raw Description: 01 0104 0830 01 03 0000 1000 0003 07 0003 0004 0005 0006 0008 1000 0019 FingerPrinted_EndPoint.ld: 0x01 App Version: 0x01 ZCL Version: 0x02 Network ID: Ox003F Zigbee EUI: 001 58D0001B6BE59 Device ID: 09953052-58ea-41 ec-9336- 6f648e5aca03

@Pauli_Riihioja From here the request is easier to notice

[guzzuk (Andrew Gorrie)]

Anyone seen an edge driver for Hive thermostat and TRVs as the GitHub driver no longer works

thanks
Andy

[Nickepick (Niklas Cedervall)]

Hi!
I’m looking for edge driver for HZC electric Water leak sensor (S900W-ZG). Could someone please point me out were to find one or could someone add one?

[ShadowLink]

Hi I’m kinda new to the whole ST edge driver thing, so please excuse me if this was already mentioned somewhere.
I’ve recently purchased a Zigbee Thermostat but couldn’t find any pre-existing edge drivers that will function with it properly.
Is there some sort of say to implement this / a way to fork an exisiting driver to customize it to my needs?

(FYI https://www.aliexpress.com/item/1005005061627319.html?spm=a2g0o.order_list.order_list_main.11.10cc1802UQtFzm its this product)

[anewtoi (Phillip)]

where does one find the fingerprint info to request an edge driver? when im in the IDE and click on a device, I thought the info used to be in the description of the device. Thanks

[h0ckeysk8er (Bruce Pinsky)]

@anewtoi

where does one find the fingerprint info to request an edge driver? when im in the IDE and click on a device, I thought the info used to be in the description of the device. Thanks

You can either use the ST CLI or the API Browser+ from @TAustin.

[Jay316 (Eshan Jay)]

Hi,

Does anyone know of an edge driver for Livingwise 7 button zigbee scene controller?

LVS-ZB-SC7

Device ID: d57d0e58-d089-4d73-8aec-c5f6bd357949

[Khhh]

I’m looking for a Edge driver for IKEA Symfonisk. Want to use this one as a dimmer, not as Sonos controller.

[JDRoberts]

@anewtoi

where does one find the fingerprint info to request an edge driver? when im in the IDE and click on a device, I thought the info used to be in the description of the device. Thanks

There are three different methods. See:

How to Get the Manufacturer ID and Model (fingerprint) without the IDE?

[anewtoi (Phillip)]

Thanks. Bruce and JD

[anewtoi (Phillip)]

does anyone know if there is an edge driver for this button? https://a.co/d/1otzyDV
It’s a 3 function button that is almost identical to the Ikea Dimmer button but the driver for the ST won’t recognize it with the drivers I currently have installed. thanks.

[JDRoberts]

@anewtoi

does anyone know if there is an edge driver for this button? https://a.co/d/1otzyDV

Like many Tuya devices sold by third parties, it probably has a unique fingerprint, and it may be using proprietary code.

Check the quick browse list in the community-created wiki for remotes and buttons and see if there’s a Tuya button edge driver there. It might also be listed under MOES.

https://thingsthataresmart.wiki/index.php?title=Quick_Browse_Lists_for_Edge_Drivers

If you find the right model, but the fingerprint isn’t an exact match because the manufacturer name is different, ask in that author thread to have them include it.

[Wajo357 (Joey W.)]

This seems interesting and I may get if there was an edge driver:

Tuya Zigbee Plant Soil Sensor GXM-01 Review

[Buds_Smart_Home]

@K_White

Was a little bummed to see that the Ultraloq U-Bolt Z Wave deadbolt didn’t make the list for the released edge drivers. Hope this can get added.

• MSR: 0452-0004-0001
• fw: 1.1
• networkSecurityLevel: ZWAVE_S2_ACCESS_CONTROL
  Raw Description zw:Fs2ac type:4001 mfr:0452 prod:0004 model:0001 ver:1.01 zwv:7.14 lib:03 cc:5E,55,98,9F,6C sec:86,72,5A,87,73,80,62,63,85,8E,59,7A

@philh30

The command classes of your device match the generic fingerprint in the driver, so it might still work for you.

The Ultraloq U-Bolt Pro Z-Wave Smart Deadbolt has not be assigned an Edge Driver as yet. I have tried to uninstall the re-onboard the device on a couple of different occasions and it does not discover any of the Z-Wave Drivers to which I have subscribed. I am requesting that the devices manufacture and fingerprints be added to one of the existing Z-Wave Lock drivers.

[royeiror (Rodrigo Carvajal)]

Hello everyone, I got a hold of some very compact and inexpensive sensors from EZVIZ (HIKVISION) that I’ve had no luck getting to work and would love to buy more because of their bang/buck ratio.

One is a basic door sensor and the other is a motion sensor.

[Mariano_Colmenarejo]

@royeiror

I got a hold of some very compact and inexpensive sensors from EZVIZ (HIKVISION) that I’ve had no luck getting to work and would love to buy more because of their bang/buck ratio.

Added to these driver versions

───────────────────────────────────────────────────
 Name         Zigbee Contact Mc
 Version      2023-03-03T16:11:16.451187275        
───────────────────────────────────────────────────
- id: "EZVIZ/CS-T1C-A0-BG"
    deviceLabel: EZVIZ Contact Sensor
    manufacturer: EZVIZ
    model: CS-T1C-A0-BG
    deviceProfileName: contact-battery-profile

───────────────────────────────────────────────────
 Name         Zigbee Motion Sensor Mc
 Version      2023-03-03T16:11:43.736742181        
───────────────────────────────────────────────────
- id: "EZVIZ/CS-T2C-A0-BG"
    deviceLabel: EZVIZ Motion Sensor
    manufacturer: EZVIZ
    model: CS-T2C-A0-BG
    deviceProfileName: motion-battery

[royeiror (Rodrigo Carvajal)]

Thank you Mariano, I appreciate the quick response. I hope these devices come down in price, because they are very discreet an aesthetically pleasing.

[royeiror (Rodrigo Carvajal)]

Hello again. Just noticed the drivers are crisscrossed. The T1C is the motion sensor and the T1C is the contact sensor. At the moment the T1C is set as contact sensor and the T2C is set as motion sensor.

[Mariano_Colmenarejo]

@royeiror

Just noticed the drivers are crisscrossed. The T1C is the motion sensor and the T1C is the contact sensor. At the moment the T1C is set as contact sensor and the T2C is set as motion sensor.

Sorry, fixed in these driver versions

───────────────────────────────────────────────────
 Name         Zigbee Motion Sensor Mc
 Version      2023-03-03T22:29:41.569696648        
───────────────────────────────────────────────────
- id: "EZVIZ/CS-T1C-A0-BG"
    deviceLabel: EZVIZ Motion Sensor
    manufacturer: EZVIZ
    model: CS-T1C-A0-BG
    deviceProfileName: motion-battery
───────────────────────────────────────────────────
 Name         Zigbee Contact Mc
 Version      2023-03-03T22:29:59.3955432
───────────────────────────────────────────────────
 - id: "EZVIZ/CS-T2C-A0-BG"
    deviceLabel: EZVIZ Contact Sensor
    manufacturer: EZVIZ
    model: CS-T2C-A0-BG
    deviceProfileName: contact-battery-profile

[Declankh]

Hoping to get this product in the next week or so.
I may work with the standard temp humidity sensor but I believe there are settings for the device at control what’s displayed on the lcd panel. These are present in the ewelink app if connected via an ewelink hub. But since I won’t be using ewelink it would be great to get this supported in SmartThings

SONOFF SNZB-02D Zigbee LCD Smart Temperature Humidity Sensor