Following on from the thread here I’ve starting my own thread for my versions of the Xiaomi Motion, Contact and Smart Button device handler. This is so that people are able to find my device handlers easier and concentrate any discussion specific to my version of the handlers rather than previous o…

That is interesting - usually no battery reporting means a loss of connection, apparently not true in your case… Nothing comes up in live logging for them either? Also, what are your max and min settings for “Max Volts\ A battery is at 100% at __ volts\ Range 2.8 to 3.4” and “Min Volts A battery…

Non batterie reporting since 3 days Open/close fonction report good. Where i can watch the battery volt? When i go in the device parameter, i only can change the device name and the icon

I think you aren’t using the correct or the most recent dth. You can use the dth from this repo: Original & Aqara Xiaomi Zigbee Sensors (contact, temp, motion, button, outlet, leak, etc)

Big thanks to you, it was the problem I solve the 3 sensor Big big thanks.

Hello, I am using your DTH for a Xiaomi temperature / humidity sensor… It’s working good in the ST app but now trying to add it to ActionTiles… It doesn’t show up as a device to add to AT… I also confirmed that it doesn’t show up when I try to add it to the Smart Home Monitor app either. Can you pl…

[image] kmccb: Hello, I am using your DTH for a Xiaomi temperature / humidity sensor… It’s working good in the ST app but now trying to add it to ActionTiles… It doesn’t show up as a device to add to AT… I also confirmed that it doesn’t show up when I try to add it to the Smart Home Monitor app …

Hi, I have a new WXKG03LM aqara switch which with the DH in git hub here https://github.com/bspranger/Xiaomi/blob/master/devicetypes/bspranger/xiaomi-aqara-button.src/xiaomi-aqara-button.groovy wasnt registering clicks. I had to add the following line in the same section as the similar lines and i…

[image] plc71: I had to add the following line in the same section as the similar lines and it now works Thanks for this information. I have updated the Aqara button DH to include your fingerprint information. The fingerprint lines in a DH only help SmartThings to assign the correct DH when …

I’ll second the reliability problems. My temperature sensor lays literally on top of the Hub (it measures the temperature of the server box when the hub is). An hour after pairing it stops sending readings, and in two hours ST declares it unavailable. I deleted/paired it 3 times, with the same resul…

You should look at the hub log when pairing the sensor. My specifically the zbjoin message. In there you can see the parent device the sensor connected to. If it is not directly to the hub or another proven zigbee gateway, the sensor will drop off after a while. The ST hub is “0000”.

[OBSOLETE] Xiaomi Sensors and Button (beta)

Devices & Integrations Community Created Drivers

veeceeoh (Keith G) June 6, 2018, 11:44pm 2409

Are you using a DTH from the GitHub repo linked at the top of this thread?

There are newer updated Xiaomi device DTHs with fixes and improvements available and discussed on a different thread, here.

I suggest to try using the updated Xiaomi temperature / humidity sensor DTH.

Topic		Replies	Views
[OBSOLETE] Xioami Zigbee Door/Window Sensor, Motion Sensor, & Smart Button Device Type Community Created Drivers dth_motionsensor , dth_remotes , dth_sensors	1214	167910	December 5, 2022
Xiaomi devices on sale (buttons/sensors/cubes) Deals	215	20607	March 10, 2018
[OBSOLETE] Original & Aqara Xiaomi Zigbee Sensors (contact, temp, motion, button, outlet, leak, etc) Community Created Drivers	1969	250795	February 2, 2023
Xiaomi vs Aqara door/window sensors Devices & Integrations	183	75104	January 12, 2020
Xiaomi/Aqara Water sensor Devices & Integrations	143	45995	December 27, 2022

[OBSOLETE] Xiaomi Sensors and Button (beta)

Related topics