[OBSOLETE] Steinel IS-140-2

CopyCat73 · July 20, 2018, 2:42pm

CopyCat73/SmartThings-Dev/blob/master/devicetypes/copycat73/steinel-is-140-2-zwave.src/steinel-is-140-2-zwave.groovy

/**
 *  Steinel IS 140-2 Z-Wave
 *
 *  Copyright 2018 Nick Veenstra
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
 *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
 *  for the specific language governing permissions and limitations under the License.
 *
 */
metadata {
	definition (name: "Steinel IS 140-2 Z-Wave", namespace: "CopyCat73", author: "Nick Veenstra") {
		capability "Motion Sensor"
		capability "Switch"
		capability "Illuminance Measurement"

This file has been truncated. show original

MrSteveFay · July 27, 2018, 5:33pm

Hi,

I have installed and published this device handler for my Steinel light, however ST sees the device as “Z-Wave Device Multichannel” and only provides for On/Off control.

Any advice on where I could be going wrong? Any logs that would be of assistance?

Update:

Needed to adjust device type to match “Steinel IS 140-2 Z-Wave” in the smartthings API, once i did this it worked a charm!

Phil.Dye · October 7, 2018, 7:24pm

Smartthings aside, how’s this working as a device? I’ve read some not-so-good reviews about it weird behaviour from it.

Phil

Wardie · February 7, 2019, 1:07pm

I’m interested in this and read same reviews putting me off a bit. But I can’t find any alternative to replace an existing dumb mains voltage PIR with a smarter one. Any views/alternatives?

CopyCat73 · February 7, 2019, 3:55pm

It hasn’t proven very reliable. Could also be because it’s in the garden which causes zwave range issues, but that’s the main reason I’m moving to iot based automation.

Wardie · February 9, 2019, 5:41pm

Well… early days but I’ve just installed one of these despite the reviews. Adding to the z-wave network took a while as you need to ensure the light threshold setting is on max as well trigger the setting button for inclusion. Also physical install is a bit fiddly but I did it myself no errors.
However, so far it looks like working great. Thanks for the driver! Reporting LUX on regular basis, you can switch the lights on/off independently of the PIR. PIR remains on during the day and reports activity (despite the review on vesternet). See how stable it is over time now… (I also bought a Aeotec z-wave socket/repeater to sit near the exterior location.)

Michael_Tschirsch · December 22, 2019, 10:07am

Hello CopyCat73,

I use your device handler, but lux is not reporting I also get an error message in the live logging. Could you please have a look for me, thank you.

10:07:01 AM: error groovy.lang.MissingMethodException: No signature of method: script_dth_0d425cf8ab3cd4275ed52262e79902d8005a20591912bf8800555abbc174bfe1.zwaveEvent() is applicable for argument types: (physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap) values: [MultiChannelCmdEncap(destinationEndPoint: 0, parameter: [3, 10, 5, 58], sourceEndPoint: 2, command: 5, commandClass: 49, bitAddress: false)]
Possible solutions: zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport), zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport), zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport), zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport), createEvent(java.util.Map) @line 78 (parse)

Nicksurrey · April 21, 2020, 8:52pm

Hi, will this generate an event for when the pir is triggered as I have seen mixed reports?

Wardie · April 22, 2020, 8:15am

Well… since I installed this I’ve found it so inconsistent I just don’t use the smart capabilities of it any more. There’s been times it has stuck on, not activated etc. Just flaky. Would not buy again.

Nicksurrey · April 22, 2020, 8:49am

Thanks- appreciate the response- just cancelled my order

daveboyy · March 9, 2021, 10:27pm

Hi

anyone managed to get this working or XLED HOME 2 light ?
I had this flood light ( XLED HOME 2 ) working for about 2 years using IS 140-2 device handler and it was working fine. Recently my light broke so I have replaced it with new exactly the same but now I cannot get it to work it seems like keeps breaking my z wave network all the time, so gave up.
If anyone would be willing to improve/update the current DH i would offer financial contribution

Topic		Replies	Views
Steinel XLED home 2 Floodlight Connected Things	12	3485	March 8, 2021
[OBSOLETE] GE Motion Switch (26931) and Motion Dimmer (26933) Community Created Device Types dth_motionsensor , dth_lighting	734	32517	July 20, 2022
[RELEASE] Z-Wave Dimmer Switch with stepper and Low/Med/High Community Created Device Types dth_lighting	35	6848	May 25, 2017
[OBSOLETE] ZOOZ ZSE40 4-in-1 Sensor Device Handler Community Created Device Types dth_humiditysensor , dth_motionsensor , dth_luxsensor , dth_sensors	123	24576	June 8, 2019
[RELEASE] Zooz Outdoor Motion Sensor - VER 2.0 (ZSE29) Community Created Device Types dth_motionsensor , dth_luxsensor , dth_security , dth_sensors	33	2841	December 18, 2022

[OBSOLETE] Steinel IS-140-2

Related topics