New GE Line of Z-Wave Switches/Recepticals (127XX Series)

[Nezmo]

@jfung1668

one last question, is it easy to make the swap? meaning, are there extra wires i need to add/swap or do i just need to put the old wire where the other ones went?

There isn’t a one-answer fits all to that question if we’re talking about 3-way set ups There is an excellent FAQ here that can help.

[FAQ] GE 3-Way Wiring

I’ve decided to put this FAQ together to help those with questions about installing GE 3-way switches. Definitions of terms: Line: The hot wire from the breaker (usually black) Neutral: The return wire for circuits (usually white) Load: The wire that will be hot when the circuit is completed to your light (usually black) Traveler: In existing 3-way wiring, this wire toggles hot between two switches. In a smart switch 3-way configuration, a smaller charge is looped through the add-on switch. Some things to know: 3-way wiring for smart switches is different than standard 3 way wiring. You cannot use dumb 3-way switches with most smart switches (You must purchase the matching GE add-on switch to wire with your GE smart master switch). If the line is wired into the light fixture, you …

If it’s just a single 2-way switch then you need a neutral as mentioned above and be able to ID which wire is line and which is load.