Need help with a 5050 LED project

[michaelahess (Michael Hess)]

[OBSOLETE] SmartLife (H801) RGBW LED Strip Wifi Controller & Bulb

2020-05-27 - Update: The firmware listed in the thread is now (has been for a while) a “Universal” firmware that works with just about any ESP8266 based RGB/WW/CW controller. You just need to assign the proper pin numbers in the web interface of the device after you add it to the wifi network. Thanks to @cjcharles on the help on the firmware! Universal Firmware For detailed instructions on flashing and setup including video & photos, see post 360. 2017-02-15 - Update: I have added compatibility for a few new controllers that are sold under the Arilux brand. I’ve posted the specifics further in this post. 2017-01-23 - Update: I’ve added the ability to export and import programs. Scroll down for some program strings that can be copied and pasted into the SmartApp. 2017-01-21 - Update: I’…

Check post 129:

[OBSOLETE] SmartLife (H801) RGBW LED Strip Wifi Controller & Bulb

H801: http://www.aliexpress.com/item/DC5-24V-Wireless-Smart-Dimmer-Receiver-Output-5-Routes-PWM-Data-WiFi-APP-Controlled-for-RGBW/32634286022.html or https://www.amazon.com/dp/B01GJMRLUY FTDI Adapter: Firmware Flash Utility: Firmware: https://github.com/erocm123/SmartThingsPublic/raw/master/devicetypes/erocm123/smartlife-rgbw-controller.src/SmartLifeRGBWController.ino.generic.bin You connect the FTDI pins TX/RX/GND to their respective labeled holes on the H801. Alternatively you can solder some pins to them for easier connection. https://www.amazon.com/gp/product/B00R1LEIL8/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 Then jumper J3 before applying power. See the below image. You can either use 12v with the green VCC/GND on the RIGHT of the device (where it says Power and Sign…