Just a Button? 1 button, nothing more fancy?

Yep, the Xiaomi button is great. Just a big circular button to slap on the wall. The Iris buttons are okay, but they have a design flaw with the battery container.

I plan to use these to toggle my blinds.

I had a similar need…
I just used a standard momentary wall switch connected to a water sensor…
Just cut the plug off and connect the wires across the switch.
Then I wrote a little smartapp to toggle on/off the light

When you press the switch it reports ‘wet’ so you can do anything after that

if you mount it in a surface patress you can stick it anywhere

+1 for Xiaomi buttons and sensors.

I have two of the Xiaomi buttons and I can’t get them to connect to ST.

Is this common?

For the Xiaomi? Yes. They’re pretty well-made, they’re very cheap, but they are not certified to the same protocol that SmartThings uses. They’re really only intended for use with their own Gateway. There are some community members using them successfully, but at least twice after a SmartThings platform update they’ve stopped working altogether for a little while. There’s no guarantee that won’t happen again since they aren’t certified. But again, very cheap.

You can talk to people who are using them in the following thread:

1 Like

Agreed, this is common. What I’ve realized from using them for the past 9 months is pair standing on top of the ST hub, and the robustness of your mesh matters. Xiaomi devices can be a headache, but when they work, they work well.

The battery life is excellent. I haven’t had to change a single one.

Also, I just ordered 5 of the new motion sensors in addition to more of the old contacts and buttons. Xiaomi devices now blanket my home, though they started as a handful for testing.

I would not recommend them to others though. This is because I know how frustrating the onboarding can be. Some devices were easily paired and I haven’t thought about them since. Others were paired and fell off once or twice over months. Others still were paired and repeatedly fell off (even after showing battery status).

1 Like

My recommendation is Almond securifi button. It’s zigbee 1.2, same as SmartThings and stable

1 Like

Well that’s a bummer. I shouldn’t have recommended them before trying them. I have two here ready to integrate - I’ll report back.

I guess we definitely need more options for “one single button”. It doesn’t look like there’s a good wholesome bulletproof option for everyone yet.

Update - My Xiaomi buttons paired with no problem on the first try. They seem to be working with a4refillpad’s DTH… Hopefully they stay that way.

1 Like

It will be a long time before that happens in Home Automation for any Device class. :wink: As the old saying goes “all home automation is local.” There are just a lot of variables, including the strength of the mesh, building architecture, even the weather can make a difference. So what works well for one person may not work well for another.

As for options for a button, so far everything that has been mentioned in this thread is also listed in the buttons FAQ, plus a number of other options, so there are a lot of choices. :sunglasses:

One thing I did want to mention is that due to the nature of Zwave and zigbee, battery powered buttons may always be a little flaky. Not terrible, but maybe 1 to 2% of the time you’d have to press a button twice. That’s because in order to make battery life longer, these devices “sleep” in between uses. And every so often one will be asleep and then you have to wake it up before your message gets sent.

Mains powered devices don’t have this issue, and that includes voice options. Now that Amazon has added room awareness turning lights on and off it’s even easier – – whatever room you are in, you just say “echo, turn the lights on” and the lights for that room will come on as long as you have set up a group to do that.

We have a lot of people coming to our house as we are three housemates with friends and family, plus health aides. The new echo – enabled groups have really simplified instructions for visitors. :sunglasses::bulb:

But of course sometimes you do want a silent option, and the buttons can be great for that. But even the best of them will have a higher failure rate than a mains powered device because of the sleep issue.

All of that is separate yet again from the Xiaomi issue, which is dropping off the network all together, not just being asleep and needing to be awakened. So there is a difference between brands and models as well.

1 Like

Those Flics look perfect, but it looks like they rely on Bluetooth connectivity to your phone. That won’t work for guests. Can’t rely on us being home for the button to work the lights.

Ok, time to start testing. I got 3 to try:

  1. Iris by Lowe’s 2nd gen smart button, $21.
  2. Aeotec 4-button wall mote, $59
  3. Lutron LZL-4B-WH-L01 Connected Bulb Remote, $21.

Iris has terrible reviews, Aeotec is a mixed bag, and Lutron seems to have the most positive reviews. I focused on reviews from smartthings users.

Ok thanks for the warning.

My husband is dying for me to get us an Echo… my hesitation is the size of our house. It’s a big ol’ Victorian, with old-school segmented rooms spread across 2 stories. We’d need at least 3 Echos to actually use it to issue commands throughout the house. I think I want the buttons in place first, then echo can be a convenience he and I enjoy down the road once I’ve got primary physical controllers in place.

1 Like

Yikes. That’s all I need to hear to not want to deal with xaomi. Price sounds fantastic, but would rather pay more for less hassle.


I returned the Iris button after few weeks like the other folks.
The Lutron works nicely and it’s small, providing dimming functions to a bulb, very good value for the price.
The Lutron can also pilot directly a bulb so you could consider having a bulb automated without ST here. But I understand your have 3 lamps so you might consider using it as a switch only and either have 3 smart bulbs or one smart wall outlet. I recommend the Z-wave from GE you can find at Lowe’s:

1 Like

Would it be possible to send a wake command to these buttons with a motion sensor? For instance, I’m planning on a Xiami button to control blinds. The bathroom also has a motion sensor, so it could theoretically wake up the button whenever anyone’s in there…

The Lutron connected bulb remote doesn’t work well with SmartThings. So I’m not sure it’s going to work the way you imagine it. But you can try it and see.

We use the flic buttons at our house and really like them, but we have a tablet set up on each other side of the house as a permanent home automation controller and have the flics paired to those.

As it happens, flic is just coming out with their own “hub” to address exactly this issue. It will cost about $89 once it’s for sale at Amazon. It’s still in pre-release and is expected to become available in late January. So then it becomes a question of whether you want to wait and see what the reviews are like.

The other alternative is just to buy a cheap wifi phone and use that for the same purpose. You can typically get these for about $25 from Walmart.

No that’s not how those devices work. You can’t send them a wake command. It’s part of the internal firmware. The whole point of being asleep is that during those periods it is not listening to the network at all. So it wouldn’t hear a wake command.

In some cases you can change how frequently they wake up, but then you use batteries faster, and I’m not sure that’s configurable on the Xiaomi anyway.

1 Like