Hi I’m about to make a leap into HA, and owing to already owning a Sonos and Logitech Hub, SmartThings seems like a good bet. My first DIY job will be adding Fibaro Dimmer 2 modules behind 2-way momentary switches on most of my lights. However, in concerned that this is going to be a stressful ope…

Thanks a lot, in the end I actually took the original template for the 211 dimmer and re-wrote it myself and it works. The issue was purely the scripts I had downloaded form here were not sending the parameters or even the on/off codes correctly and I’m still not sure why they are different to v1. I…

That is strange. I’m on a 2-wire system and this worked for me. Still - glad you have it sorted. I think these Fibaro’s are great but there still seems to be a bit of black magic here and there when using with SmartThings!

Can anyone help with a bit of wiring advice? The switch on the left is the one I want to use for my Fibaro Dimmer, but I’m unsure as to the best / correct way to wire it up. Anyone able to help? [image] [image]

That looks bog standard to me, and everything you need should be in the instructions. If you’re at all unsure or not confident, you should use an electrician. Taking these things on yourself is one thing (although technically against the law, even in your own house if you’re not an electrician). Ad…

Every time I try to create a code I get this message below, and it won’t let me create it. I’m only trying to directly use one of the codes here. I haven’t changed anything as I’m unsure what to change but it seems I have the same setup as shazbot. If anyone can help I’d be very grateful. No signa…

Thank you for your help although when I tried this code, I had the same response. I’m a real novice so any help greatly appreciated. I literally copy and paste. Should I be changing anything specifically?

If you’re struggling, @JDRoberts ’ FAQ is worth a look: [image] [OBSOLETE] FAQ: An Overview of Using Custom Code in SmartThings (SmartThings Classic, Groovy Code) FAQ The original FAQ information in this thread refers to the original smartthings architecture, which was in…

That’s what I was doing! Thank you. I will try Rajiv’s code. In a previous post you mentioned you commented out a parameter. What does this mean? All I need to do is make S2 work and both on momentary switches. Many thanks

There’s a parameter section in the manual for the module, well worth a look over as it explains a lot about what it can do. Previous to Rajiv’s code, it was necessary to go into the development interface to set (or comment out) parameter settings. Now these can be accessed directly through the ST a…

Fibaro Dimmer 2 Integration

Devices & Integrations

John_Crighton (John Crighton) August 9, 2016, 3:36pm 30

You should be using @Rajiv 's code: Fibaro 2 Dimmer (212 not 211)

Topic		Replies	Views
[RELEASE] Fibaro Dimmer 2 (US) Community Created Drivers dth_lighting , dth_inwallmicro	60	8544	January 2, 2019
[RELEASE] Fibaro Dimmer 2 (FGD-212) - Advanced DTH (V2) Community Created Drivers fibaro , dth_lighting , communitydevices	203	30183	June 5, 2021
Fibaro Dimmer 2 Devices & Integrations	167	10384	November 16, 2020
Fibaro 2 Dimmer (212 not 211) General Discussion smartlighting , uk_ie_specific	674	60854	August 5, 2018
Fibaro dimmer 2 lost its dimming function recently General Discussion uk_ie_specific	20	4867	December 28, 2017

Fibaro Dimmer 2 Integration

Related topics