Now I got it, my bad.
Works great, the ghost activations are gone!
Thanks a lot.
1 Like
@Mariano_Colmenarejo
The 2022-01-17 version of your Zigbee Switch Mc Edge driver seems to have solved the problems with the Sonoff ZBMINI relay. Everything seem to be working as expected.
I will keep a watch on this and let you know if I see any problems.
Again Thank You for developing these Drivers and debugging them when there are problems.
1 Like
If you use the actions of the automations you have the option to reset the total energy consumption.
It is the default option of the energyMeter capability presentation
I don’t know why the default presentation doesn’t show the ReserEnergy command in the details view, since in the presentation of the energyMeter capabiliy it is
@nayelyz
It has a solution this stock presentation of ResetEnergy command
Hi,
thank you very much for your great work. I am using the driver “Temp and Humidity Sensor MC” for a Sonoff SNZB-02. Everything is reported correctly within the details view of the device, but there is no temperature shown on the device tile.
Is this the expected behaviour or should the temperature show up on the device tile?
Sorry I made a mistake publising the latest version.
It is already fixed in this version, it should be fixed only when the new version is updated
┌─────────────┬──────────────────────────────────────┐
│ Name │ Zigbee Temp Humidity Sensor Mc │
│ Version │ 2022-01-19T14:09:17.784994 │
└─────────────┴──────────────────────────────────────┘
Hello, niquini, I hope you are well too
Added to this driver version
- id: "TUYATEC-2gn2zf9e/Motion"
deviceLabel: TUYATEC Motion Sensor
manufacturer: TUYATEC-2gn2zf9e
model: RH3040
deviceProfileName: motion-battery
┌─────────────┬──────────────────────────────────────┐
│ Name │ Zigbee Motion Sensor Mc │
│ Version │ 2022-01-19T15:57:00.107161 │
└─────────────┴──────────────────────────────────────┘
Buenas!
Hey Mariano. Niquini introduced me your work and i would like to thank you a lot for the previous help for me and all community here in Brazil!
He also previously posted some info about this RH3040 Zemismart Zigbee Motion Sensor (battery) and my version was not recognized.
Here is the data:
Would you mind to add it?
Thank you again
Coelho
1 Like
hello @Coelhorj,
If you already had the driver installed, you have to check and wait for the version date to be this or higher.
If you don’t want to wait, you can install it with the CLI or uninstall old driver of the Hub and reinstall it from the channel.
Thank you very much, now the temperature is displayed.
Another one to you. A Zigbee Switch, also Zemismart. An “old” model rounded touch button TS0001:
Metrics
- Last Hop LQI: 120
- Last Hop RSSI: -70
- Received Messages From Device: 267
- Received Messages From Device (Duplicates): 2
- Messages Transmitted to Device: 139
- Messages Transmitted to Device (Failures): 0
- Updated Time: 2022-01-19 4:43 PM BRT
Data
- application: 40
- endpointId: 01
- manufacturer: TUYATEC-dp5y39af
- model: TS0001
- onOff: catchall
- zigbeeNodeType: ROUTER
Raw Description
01 0104 0100 00 05 0000 0003 0004 0005 0006 01 0019
Current States *
- switch: off
- checkInterval: 720 s
Added to this driver version
┌─────────────┬──────────────────────────────────────┐
│ Name │ Zigbee Switch Mc │
│ Version │ 2022-01-19T21:08:03.562256 │
└─────────────┴──────────────────────────────────────┘
- id: "TUYATEC-dp5y39af/TS0001"
deviceLabel: TUYATEC Switch
manufacturer: TUYATEC-dp5y39af
model: TS0001
deviceProfileName: single-switch
Amazing!
Thanks!!
A new one. Again Tuya Based, Lumminance sensor, model TS0222
Processing: 16426278318704588366505657727119.jpg…
Data
application:
44
endpointId:
01
manufacturer:
_TYZB01_4mdqxxnn
model:
TS0222
zigbeeNodeType:
SLEEPY_END_DEVICE
Raw Description
01 0104 0106 01 04 0000 0400 0001 0500 02 0019 000A
I don’t have any illuminance driver.
Ask to @Benjamin_Ginders, who made a driver to illuminance device to see if he can add your device fingerprints
1 Like
all right, just posted there. Thaks again!
Hallo ! Is it possible to do a edge driver to this smarthings siren ?
- zigbeeNodeType: SLEEPY_END_DEVICE
- firmwareManufacturerCode: 4401
- firmwareFullVersion: 15006230
- application: 15
- endpointId: 01
- firmwareImageType: 124
- manufacturer: Sercomm Corp.
- model: SZ-SRN12N
Raw Description 01 0104 0403 00 05 0000 0003 0500 0502 0B05 01 0019
Best regards Markus
Hello,
Added to this driver version
┌─────────────┬──────────────────────────────────────┐
│ Name │ Zigbee Siren Mc │
│ Version │ 2022-01-22T16:43:50.441379 │
└─────────────┴──────────────────────────────────────┘
- id : Sercomm/SZ-SRN12N
deviceLabel : Sercomm Siren
manufacturer : Sercomm Corp.
model : SZ-SRN12N
deviceProfileName : switch-alarm
Hi Mariano,
Did you get the time to check this?
Do you refer to this device?
For this manufacturer, I have write a 1 in the attribute 0x0099 of the cluster 0x0000, as a post that link to me says.
For it to take effect you have to uninstall and reinstall the device with the new version of the driver.
please tell me if it works or not
┌─────────────┬──────────────────────────────────────┐
│ Name │ Zigbee Multi Switch Zemismart Mc │
│ Version │ 2022-01-22T17:23:29.327658 │
└─────────────┴──────────────────────────────────────┘