(EDGE Driver-Mc): Zigbee Drivers for Motion, Open/Close, Moisture, Smoke-Co Sensors and others Devices

Devices & Integrations Community Created Device Types
, , ,
2896

Thank you!
I know the solution of the virtual switches, I just try to avoid it as much as possible because it will cost me a lot of automations and will be cumbersome.

I hope there will be childs switches also for my multi switch soon :pray:

2897

I’ve just tried this one but it has same result.
Battery is always 0 and status always closed. Nothing changes when I move reciever.

2898

Well, I have no idea, if device really use clusters 0500 and 0001 it should work.

If you want to send some log with the CLI, I’ll take a look

2899

Sorry @Mariano_Colmenarejo but I have no idea how to send you log. Where can I find it?

2900

@gifa84

This device is not going to work for you with luminance either.
You can search for other sensors that work well, like this one in the link, but hs and more if you search the thread

2901

I have a couple of these Sengled outlets on my property to support some appliances that I have. Would it be possible to add the fingerprints for this outlet to your Zigbee Switch MC pack? The signal strength indicator should help with some rearranging that I will need to undergo soon.

Screenshot_20221127-113508
Screenshot_20221127-1135081440×1753 181 KB

2902

Hi Mariano,

Unfortunately the last character doesn’t show up in the Thing driver :frowning: Any suggestions on how to find it in a different way?

Regards,
Erwin

2903

You can see in App event history of device

1 Like
2904

Hi Mariano,

Yes it’s 6, correct. Just checked and the full Manufacturer is _TZ3210_K1msuvg6.

Regards,

Erwin

1 Like
2905

Hi @Mariano_Colmenarejo
I just found your collection of Edge drivers! They are awesome, thank you so much for your contribution.

Do you think is it possible to add a driver for ID Lock 150 smart lock:

  • manufacturer: Datek
  • model: ID Lock 150
  • zigbeeNodeType: SLEEPY_END_DEVICE

Also, checking the Aqara Zigbee window treatment did not find the Aqara Roller Shade Driver E1. Would it be possible to add a fingerprint for this as well?

1 Like
2906

Hi,
All works… But a little error please refer to the following picture:

image
image364×631 36.2 KB

Can this be fixed ?
@nayelyz any ideas ?

1 Like
2907

I already added it with a 6, it should work

1 Like
2908

The tile does not interpret html text.
As the only capability that the profile has is signalMetrics, it shows the status in
html.
I don’t know if it can be fixed, I’ll look at it

1 Like
2909

Hi,
This device contain the EF00 Tuya cluster.
Did you find the way to deal with that cluster ?
image

2910

I don’t know how to handle it and I already have enough to keep what I have published.

Only the one motion and light sensor uses the EF00 cluster because of Simon Tuckwell contribution, that he discover how works for this device with reverse-engineer .

1 Like
2911

Hi @kaveh_amouzgar
Added to this driver version.
I don’t know if it will work as I have no idea how locks work.
Surely the codes don’t work, try it.

Use it at your own risk

───────────────────────────────────────────────────
 Name         Zigbee Lock Mc
 Version      2022-12-09T18:12:52.766664012        
───────────────────────────────────────────────────
- id: "Datek/ID Lock 150"
    deviceLabel: "Datek ID Lock 150"
    manufacturer: Datek
    model: ID Lock 150
    deviceProfileName: base-lock

If you are looking for aqara window treatment you have to search with the fingerprints, not the brand model.
These are the Aqara models that are in my driver and the stock driver

{ mfr = "LUMI", model = "lumi.curtain" },
  { mfr = "LUMI", model = "lumi.curtain.v1" }

@kaveh_amouzgar

Please, if lock does not work tell me to remove from driver

1 Like
2912

@dotan_shai
Modified to show signal metrics text format in dashboard and detail-view

───────────────────────────────────────────────────
 Name         Zigbee Range Extender Mc
 Version      2022-12-09T18:35:51.433700704
───────────────────────────────────────────────────
1 Like
2913

No change… still looks the same.
In details → OK
in dashboard → Text Problem.

1 Like
2914

Hi? Mariano!
Would it be possible to add Edge Drivers to this Dimmer Switch?

  • application: 52
  • endpointId: 01
  • manufacturer: _TZE200_ebwgzdqq
  • model: TS0601
  • zigbeeNodeType: ROUTER
    01 0104 0051 00 05 0000 000A 0004 0005 EF00 01 0019

Larkkey Smart Zigbee Dimmer\Fan\Curtain switch
Thank you!

1 Like
2915

With new version?

1 Like