Hey! One of my old insteon switches died a few days ago so I had to replace it and I decided to give those cheap costco wifi switches a try: [IMG_2794] This 3 pack was 38,99$ CAD at my local costco, so it’s pretty cheap! not even 15$ each. Figured for the price of one Z-wave switch, I would get…

[image] magimat: Not the easiest mod, but still, not overly complicated if you are not afraid of some simple soldering and you get a nice smart wifi switch integrated with smartthings for less than 15$… not sure you can find a better deal! Maybe not a better deal, but close, and no mod requir…

well.I prefer real local integration, not one of those chinese cloud to cloud flaky integration but your right, it does work… most of the time :slight_smile:

[image] magimat: well.I prefer real local integration, not one of those chinese cloud to cloud flaky integration but your right, it does work… most of the time :slight_smile: Good point: avoiding the cloud is a big plus.

Thanks for the tutorial. They are on sale at my local Costco for $33 so I’ll give this a try.

Really appreciate you taking the time to write this up! I bought some of these and when tuya-convert failed I wasn’t sure what I’d do with them next. I’m proud to say your tutorial inspired me to try this. I’m not-so-proud to say I’m pretty sure I destroyed my first attempt! I’m not sure if I’ll try…

I noticed that desoldering these requires quite a bit of heat too. The traces on the side are just for securing the board and are connected to ground. You can use an ESP-M2 or any ESP8266/8285 board with 1M or more of flash on it as a substitute if your Tuya module breaks. Just make sure it has seri…

Actually, I think all you need is GND, VCC, TX and RX, so yea, it should be fine with some other ESP boards. Would be interesting if anyone tries it to report back!

You need GPIO0 as well to force it into firmware flash mode but I thing all ESP modules have that pin brought out.

So I can get the dimmer to dim from the Tasmota webserver and from SmartThings but I can’t get dimmer buttons to reflect back to the webserver or to ST. I can set 100% brightness and all the LEDs light up but if I manually dim to 20% and only 1 LED is lit, the webserver and ST think the dimmer is st…

I have been pointed to using the devgroup sharing feature of Tasmota and thus bypass the ST hub altogether. This will solve my issue. … Hint for desoldering. Apply some flux to the edge connector and to the ground s at the sides. Turn the board over and using a heat gun, heat from the back concent…

Costco cheap FEIT Smart Dimmer WIFI

Devices & Integrations

JDRoberts October 13, 2020, 2:43am 2

Maybe not a better deal, but close, and no mod required: it works out of the box with smartthings.

https://www.amazon.ca/Assistant-Complies-Switches-Control-Function/dp/B078CPX4XC/

Topic		Replies	Views
Lyasi Wifi wall switches (Sonoff plus Ewelink Cloud) Devices & Integrations	51	16707	April 27, 2018
[OBSOLETE] Geekbes Smart WiFi Mini Plug - Somebody Please come up with a Device Handler (uses Tuya SmartLife app) Devices & Integrations dth_pocketsocket , requires_server	59	19487	August 3, 2022
UK Light Switch Replacement for beginner / non-programmer Devices & Integrations	16	2310	January 12, 2021
UK Light Switch Options 2023? Devices & Integrations	31	3216	April 7, 2024
Wemo Dimmer Switch Devices & Integrations wemo	88	14908	January 15, 2021

Costco *cheap* FEIT Smart Dimmer WIFI

Related topics

Costco cheap FEIT Smart Dimmer WIFI