Welcome to the CoRE Logic Thread. Here you will find many community members that are more than willing to help you with the Logic and Programming of your Pistons. **There will be another thread for “How are you using CoRE?” and “How are you using the CoRE/AskAlexa integration?”. So, this is the p…

Quick question… its been ages since I first installed CoRE (v0.1…) , and now I’m looking to update to the latest version. Once I do that, will I need to re-recreate (ugh) or rebuild all my existing pistons? I’d like to think not, but wanted to confirm before taking the plunge.

I am new to using core. I am trying to set up a simple piston, but can’t seem to get it to work. I want to turn on two rgbw lights if there is motion but turn them off if there is no motion for 5 minutes. I tried a simple, but the lights don’t turn off after 5 minutes. Any ideas? Thanks!

A lot of users have been converting over to webCoRE, you’ll probably get more feedback there plus it’s easier to share pistons now. wiki.webcore.co for install instructions

I should have been more clear. I am using webcore. Any suggestions? Thanks

Ah, ok, let me paste a sample that you can import. Click the orange button and then enter the code from this piston. You can then edit/modify it to use your bulbs. [image]

Trouble adding Delay/Wait I’d like to have a light turn on after 15 seconds if 2 contact sensors are open. I set up a basic piston as follows If each of contact 1 or contact 2 is open Using location wait 15 seconds Then Using overhead light turn on. I also tried the wait 15 sec after THEN, bu…

[image] [DEPRECATED Thread: visit community.webcore.co for assistance] webCoRE - Piston Design Help (ask your fellow members for assistance) Ok well in that case the problem you are having is because you have separated your actions. Delete the location wait time and then go into your overhead li…

can you post a screenshot of your piston set up in this configuration? There must be something else causing it to not work correctly because that is the correct syntax for it to work as described.

delete the using location… wait 10 seconds. then select the using overhead light… turn on. once in there change the turn on action to wait 10 seconds. Before clicking done, scroll down and add another task of turn on.

Ok I got it. I need to make the device wait not the action. If that makes sense. Thank you

CoRE - Get peer assistance here with setting up Pistons

SmartApps & Automations webCoRE

c1arkbar (Dustin Clark) May 27, 2017, 8:28pm 8238

Just in case you dont check the other thread again. Here is your answer

Topic		Replies	Views
[OBSOLETE] [BETA MILESTONE 1] CoRE (Community's own Rules Engine) webCoRE core	1408	85526	August 12, 2016
[SHARE] CoRE - show & tell all about Pistons webCoRE core	153	29670	December 9, 2020
[OBSOLETE: [BETA MILESTONE 2] CoRE (Community's own Rules Engine) webCoRE core	464	39555	July 19, 2017
[DEPRECATED Thread: visit community.webcore.co for assistance] webCoRE - Piston Design Help (ask your fellow members for assistance) webCoRE core , webcore	4605	118920	March 13, 2019
[DEPRECATED THREAD: visit community.webcore.co for assistance] WebCoRE - Example Pistons webCoRE core , webcore	555	60088	July 17, 2018

CoRE - Get peer assistance here with setting up Pistons

Related topics