Dana,
Oh yea, I remember that issue now… Here is a copy of my tweaked version of @Mike_Maxwell’s DTH for the Washer/Dryer Aeon HEM v1 device. This will properly “announce” the correct number of “buttons” for this device as 2, thereby allowing Core to receive each of the button events so you can send out push/text messages. This has been 100% reliable for me. Hope this helps!
Not sure about your second issue. Does it ever drop below 3W?
/*
Custom Laundry monitor device for Aeon HEM V1
*/
metadata {
definition (name: "Aeon HEM V1 Laundry DTH", namespace: "MikeMaxwell", author: "Mike Maxwell")
{
capability "Configuration"
capability "Switch"
capability "Button"
//capability "Energy Meter"
capability "Actuator"
capability "Holdable Button"
capability "Sensor"
attribute "washerWatts", "string"
attribute "dryerWatts", "string"
attribute "washerState", "string"
attribute "dryerState", "string"
// command "configure"
fingerprint deviceId: "0x2101", inClusters: " 0x70,0x31,0x72,0x86,0x32,0x80,0x85,0x60"
}
preferences {
input name: "washerRW", type: "number", title: "Washer running watts:", description: "", required: true
input name: "dryerRW", type: "number", title: "Dryer running watts:", description: "", required: true
}
simulator {
}
tiles(scale: 2) {
multiAttributeTile(name:"laundryState", type: "generic", width: 6, height: 4, canChangeIcon: false){
tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
// attributeState "on", label:'Laundry Running', icon:"st.Appliances.appliances1", backgroundColor:"#53a7c0"
// attributeState "off", label:'Laundry Done', icon:"st.Appliances.appliances1", backgroundColor:"#ffffff"
attributeState "on", label:'', icon:"st.samsung.da.dryer_ic_dryer", backgroundColor:"#79b821"
attributeState "off", label:'', icon:"st.samsung.da.dryer_ic_dryer", backgroundColor:"#ffffff"
}
tileAttribute("device.switch", key: "SECONDARY_CONTROL") {
attributeState "on", label:'Laundry Running'
attributeState "off", label:'Laundry Done'
}
}
/*
valueTile("washerState", "device.washerState", width: 3, height: 2, canChangeIcon: true) {
state "default", label:'Washer\n${currentValue}'
}
valueTile("dryerState", "device.dryerState", width: 3, height: 2, canChangeIcon: true) {
state "default", label:'Dryer\n${currentValue}'
}
*/
standardTile("washerState", "device.washerState", width: 3, height: 3, canChangeIcon: true) {
state "off", label:'${name}', icon: "st.samsung.da.washer_ic_washer", backgroundColor:"#ffffff"
state "on", label:'${name}', icon: "st.samsung.da.washer_ic_washer", backgroundColor:"#79b821"
}
standardTile("dryerState", "device.dryerState", width: 3, height: 3, canChangeIcon: true) {
state "off", label:'${name}', icon: "st.samsung.da.dryer_ic_dryer", backgroundColor:"#ffffff"
state "on", label:'${name}', icon: "st.samsung.da.dryer_ic_dryer", backgroundColor:"#79b821"
}
valueTile("washer", "device.washerWatts", width: 3, height: 2, decoration: "flat") {
state("default", label:'Washer\n${currentValue} Watts', foregroundColor: "#000000")
}
valueTile("dryer", "device.dryerWatts", width: 3, height: 2, decoration: "flat") {
state("default", label:'Dryer\n${currentValue} Watts', foregroundColor: "#000000")
}
standardTile("configure", "device.configure", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
}
main "laundryState"
details(["laundryState","washerState","dryerState","washer","dryer","configure"])
}
}
def parse(String description) {
def result = null
def cmd = zwave.parse(description, [0x31: 1, 0x32: 1, 0x60: 3])
if (cmd) {
result = createEvent(zwaveEvent(cmd))
}
if (result) {
log.debug "Parse returned ${result?.descriptionText}"
return result
} else {
}
}
def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
//log.info "mc3v cmd: ${cmd}"
if (cmd.commandClass == 50) {
def encapsulatedCommand = cmd.encapsulatedCommand([0x30: 1, 0x31: 1])
if (encapsulatedCommand) {
def scale = encapsulatedCommand.scale
def value = encapsulatedCommand.scaledMeterValue
def source = cmd.sourceEndPoint
def str = ""
def name = ""
if (scale == 2 ){ //watts
str = "watts"
if (source == 1){
name = "washerWatts"
if (value >= settings.washerRW.toInteger()){
//washer is on
sendEvent(name: "washerState", value: "on", displayed: true)
state.washerIsRunning = true
} else {
//washer is off
if (state.washerIsRunning == true){
//button event
sendEvent(name: "button", value: "pushed", data: [buttonNumber: 1], descriptionText: "Washer has finished.", isStateChange: true)
}
sendEvent(name: "washerState", value: "off", displayed: true)
state.washerIsRunning = false
}
} else {
name = "dryerWatts"
if (value >= settings.dryerRW.toInteger()){
//dryer is on
sendEvent(name: "dryerState", value: "on", displayed: true)
state.dryerIsRunning = true
} else {
//dryer is off
if (state.dryerIsRunning == true){
//button event
sendEvent(name: "button", value: "pushed", data: [buttonNumber: 2], descriptionText: "Dryer has finished.", isStateChange: true)
}
sendEvent(name: "dryerState", value: "off", displayed: true)
state.dryerIsRunning = false
}
}
if (state.washerIsRunning || state.dryerIsRunning){
sendEvent(name: "switch", value: "on", descriptionText: "Laundry has started...", displayed: true)
} else {
sendEvent(name: "switch", value: "off", displayed: false)
}
//log.debug "mc3v- name: ${name}, value: ${value}, unit: ${str}"
return [name: name, value: value.toInteger(), unit: str, displayed: false]
}
}
}
}
def zwaveEvent(physicalgraph.zwave.Command cmd) {
// Handles all Z-Wave commands we aren't interested in
//log.debug "Unhandled event ${cmd}"
[:]
}
def configure() {
log.debug "configure()"
initialize()
def cmd = delayBetween([
//zwave.configurationV1.configurationSet(parameterNumber: 100, size: 4, scaledConfigurationValue:1).format(), //reset if not 0
//zwave.configurationV1.configurationSet(parameterNumber: 110, size: 4, scaledConfigurationValue: 1).format(), //reset if not 0
zwave.configurationV1.configurationSet(parameterNumber: 1, size: 2, scaledConfigurationValue: 120).format(), // assumed voltage
zwave.configurationV1.configurationSet(parameterNumber: 3, size: 1, scaledConfigurationValue: 0).format(), // Disable (=0) selective reporting
zwave.configurationV1.configurationSet(parameterNumber: 9, size: 1, scaledConfigurationValue: 10).format(), // Or by 10% (L1)
zwave.configurationV1.configurationSet(parameterNumber: 10, size: 1, scaledConfigurationValue: 10).format(), // Or by 10% (L2)
zwave.configurationV1.configurationSet(parameterNumber: 20, size: 1, scaledConfigurationValue: 1).format(), //usb = 1
zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 6912).format(),
zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 30).format() // Every 30 seconds
], 2000)
return cmd
}
def installed() {
configure()
}
def updated() {
configure()
}
def initialize() {
sendEvent(name: "numberOfButtons", value: 2)
}