What projects are you currently working on?

A Zigbee tank level sensor using Aduino/Xbee and a seeedstudio ultrasonic distance measuring sensor.
Don’t know how well the sensor will go in a big concrete water tank yet but I guess I’ll find out.

2 Likes

I’m working on Valentine’s special release of ActiON Dashboard which will be released tomorrow. It will also include specialty tiles for interlinking several dashboards and separate tiles for lights.

Also, laying foundation for upcoming features, such as thermostats, groups and themes.

8 Likes

Status tile for my MakerBot 5th Gen so smartthings can alert me when there is an error or a print has completed.

3 Likes

How cool! Curious: What kinds of projects do you make with your 3d printer? Keep me updated on project, i have a personal curiousity! I love 3d printing, and if i can integrate ST, i wanna know how you did it!

2 Likes

A device driver for iTachs TCP/IP serial controllers. Will use for changing some EQ curves in my main audio system.

2 Likes

I’m currently waiting on the arrival of a couple of Arduino Mega2560 to update my Garage controller from the Arduino SmartShield Garage Controller project to this from @ogiewon:

Adding a few more sensors to it and then testing my hand at adding a voltage sensor.

If the voltage sensor can be integrated into the ST_Anything project, that will open up the possibility of utilizing it to monitor doorbells, third-wire smoke detectors, and anything that uses a electronic buzzer for signalling.

Regards,
David

2 Likes

Mostly cases for other projects, like arduino/pi type stuff. I did make a kick ass arc reactor for my cousin, though.

The Gen5 has a json-rpc server running on port 9999 that I can pull the information on and parse over wifi. The ugly side is it has a Fcgi server running for Oauth, that it looks like has to generate a new token every time I connect to it run the “get_system_information” method. Good news, is once I figure that out, it is just parsing the results and deciding which things I want to display… it dumps pretty much everything you can see from the makerware software. I see a camera stream coming out of it also, but I don’t think I will try to do anything with that, unless I can find a method that just dumps a picture somewhere.

An Arc Reactor? wait… like… Stark… ? Am I getting this right? Do you have photos and such!? that sounds really freaken awesome, and I can speak this language. :smile:

@Falcogeorge Twice this year I ran out of oil. Because Oil Tanks are regulated by the Fire Code I cant put anything in side. I started to go down a path to draw up an Aduino and set of pressure sensors to weigh the tank and convert weight to volume to measure how much Oil I had left. This fell apart after days of searching for a set of pressure sensors that could read the 1 ton full tank weight that did not cost a thousand dollars.

Another design I saw that I like was using a traditional mechanical level sensor and attaching a magnet to the bob sending the magnet location as the level location.

Good Luck

1 Like

Hi,
I have been pleasantly surprised at my successes so far. It appears to work quite well. I haven’t got the final version set up yet since I need to get a Zigbee extender sorted out but it does appear to be operating as desired.
Cheers

I design industrial scale storage systems so there my be a difference in the residential code, however unless you have any over riding local ordinances, NFPA will allow “intrinsically safe” devices… which means a mechanical level device or an ultrasonic device like this http://www.amazon.com/Rocket-7000-Wireless-Level-Monitor/dp/B001W20K0A in an AST (Above ground Storage Tank)
perhaps there is a way to get it to talk to an Aduino.

1 Like

I looked closely at that device, unfortunately it operates on 914.6 MHz FM. I started down a path to get an RF receiver that accepts 914 MHz and out-puts 908 Z-Wave but could not find anything in my research. I am not confident my technical skills will support tampering with the device’s internal parts on the sensor. Probably could find a way to do it with the remote monitor readout though but have not tried (yet).

Raw parts

Lit

I, like a lot of people here, lose track of the world when I am in the lab, so I had it on a smartthings shield and it would light up when the motion sensor on the stairs would go off. But like I told my wife, let’s face it, this isn’t the worst thing she has caught me doing… and one motion sensor light wasn’t enough… I have 6 I want to see when they get triggered, so I need a new device with 6 LEDs. I have everything working on the shield and Device type, just need final assembly and to come up with a smart app… but you can probably figure out where I am going with this…


P.S. Get more Shields in stock… I am out!

2 Likes

Solving my Comcast Woes

My latest gadget, which combines a Raspberry Pi, a cellular Mifi hotspot, a few GPIO connected relays and a xmpp connection, allows me to remotely monitor and power cycle my Comcast Cable modem and my router. Works like a charm. Everyone with Comcast in a summer home should have one. I will post images as soon as I am permitted (restricted for new signons).

Would love to integrate into ST.

1 Like

try now! 20 characters

Hi, guys!
I’m presenting a team of developers, and we have an idea of creating a mobile app that will let you control your smart home via voice commands. It’s similar to INSTEON mobile app, in particular at interface and functionality, but we are developing a way of how to teach your smart home to easy and natural voice commands.
So, I’d like to hear all your thoughts about that. How do you think, are you interested in voice-controlled smart home? What problems did you face in terms of controling your homes? Do you think that voice control is better than manual? Please, describe you experience of sm. home usage.
We will appreciate your opinions and recommendations. Thanks!

I’m quadriparetic, so voice control is very important to me. :blush: I am currently using a method Will Poirier developed that involves Siri and ifttt to control smartthings functions. Other people are using hardware options, Like Ivee and Ubi, and android users have a whole different set of available options. There is also an official smartthings voice control app for the Samsung gear S smart watch.

We have a pretty active topic that discusses all of these, so you might check that out.

I love the idea of voice control for ST. I am waiting for my Amazon Echo to show up in May so I can start looking into integrating with ST. I have already contacted Amazon and they did say that ST is on their to do list for official API support…no timeline of course.

1 Like

Just ordered 3 Nexus 7 (2013 model) tablets. Google discontinued them a couple days ago so I snatched 3 up to use as wall mounted control panels. Great tablet for a great device. Excited about the potential.

Will be using various apps to fully ST enable them, along with other functionality. Motion Detector for presence activation, etc.

Trying to decide if I should update them to Adroid 5.1. We’ll see!

1 Like

Our team is doing a smart ring,We want to do a mass consumer electronic products,We want to be a fashion, popular electronic products