RELEASE Generic Media Renderer (DLNA Speakers). Cheap Sonos Alternative (Update V2)

I get the same error. Can not complete the process…

I haven’t been able to get this to work relably no matter what version… PLAYED the barking dogs well, but that was it… no announcements… uninstalled, reinstalled… now I can’t even complete the process without the error… ‘bad state. Unabnle to complete the page configuration’. Can anyone get this new version to work without errors?

e59d1584-9743-4785-bc1f-cab97de32ee7 10:33:19 PM: debug MediaRenderer device found[devicetype:04, mac:7085C6E86BE0, ip:C0A8010A, port:C000, ssdpPath:/4/description.xml, ssdpUSN:uuid:29bbe0e1-1a6e-47f6-8f8d-7085c6e86be0::urn:schemas-upnp-org:device:MediaRenderer:1, ssdpTerm:urn:schemas-upnp-org:device:MediaRenderer:1, hub:9c02a2f1-b731-4044-9d53-97ddecdc5230]
e59d1584-9743-4785-bc1f-cab97de32ee7 10:33:19 PM: debug MediaRenderer device found[devicetype:04, mac:9CBB3008ADE1, ip:C0A80110, port:C000, ssdpPath:/description.xml, ssdpUSN:uuid:773e1b66-1dd2-11b2-8237-bb14964cd44c::urn:schemas-upnp-org:device:MediaRenderer:1, ssdpTerm:urn:schemas-upnp-org:device:MediaRenderer:1, hub:9c02a2f1-b731-4044-9d53-97ddecdc5230]
e59d1584-9743-4785-bc1f-cab97de32ee7 10:33:19 PM: debug MediaRenderer device found[devicetype:04, mac:9CBB3008ADE1, ip:C0A80110, port:C000, ssdpPath:/description.xml, ssdpUSN:uuid:773e1b66-1dd2-11b2-8237-bb14964cd44c::urn:schemas-upnp-org:device:MediaRenderer:1, ssdpTerm:urn:schemas-upnp-org:device:MediaRenderer:1, hub:9c02a2f1-b731-4044-9d53-97ddecdc5230]
e59d1584-9743-4785-bc1f-cab97de32ee7 10:33:19 PM: debug MediaRenderer device found[devicetype:04, mac:7085C6E86BE0, ip:C0A8010A, port:C000, ssdpPath:/4/description.xml, ssdpUSN:uuid:29bbe0e1-1a6e-47f6-8f8d-7085c6e86be0::urn:schemas-upnp-org:device:MediaRenderer:1, ssdpTerm:urn:schemas-upnp-org:device:MediaRenderer:1, hub:9c02a2f1-b731-4044-9d53-97ddecdc5230]
e59d1584-9743-4785-bc1f-cab97de32ee7 10:33:18 PM: debug Executing lan discovery urn:schemas-upnp-org:device:MediaRenderer:1 on Home Hub via sendHubCommand

Hi @loz, I have tested rigth now and all is working fine, I have not andorid to test, I’m installing from iphone. there are not problems , warnings or somethinge else. if therer are problems with code, in logs must apeears the problems, but in logs you sent there are not problems, I think must be android problem or smartthings problems, could you try with an ios device?

Unfortunately I don’t have an iOS device :frowning: I am not an ‘Apple’ household. How could we approach troubleshooting the Android world - happy to try and help where I can.

I too have only android devices, and I’ve tested 3 with all the same results. I agree, the issue is more than likely Smartthings on Android. It happens at the last step as soon as you press done. Once you press done, you get the error, with nothing logged. What would you suggest to try and trouble shoot the issue?

Thank you;

I have opened a ticket on this issue as it seems to potentially be a bigger issue…

Are any other Android users having this issue :

See this post as well, other android users are apparently getting the same or simular error…

Error - bad state. Unable to complete page configuration.

1 Like

I installed arc welder for chrome on my laptop and run the old ST android app on there for all my config for now. 1.7.2 crashed on almost everything right now.

Ray,

Where did you get the old .apk for smartthings? I may go with that option until they fix the app.

Thank you;

Here is 1.6.9

Have you tried using this old version, adding any players then upgrading back to the new version? Just wondering if everything sticks.

Ray,

Thank you!

I had been searching and could not find a good link…

1 Like

Jon,

I will be trying this sometime today…

HI @vitamincm, I have post an article to allow airplay and bluetooth speakers.

This worked for me with old version of ST app. Yay.

1 Like

I am getting this same error. I tried to follow the thread but couldn’t see it – did you guys figure that out?

Kristopher

I am also getting the “Error - bad state. Unable to complete page configuration” error. As suggested in this link, I tried clearing app cache and data. Didn’t solve the problem. I am on Android 5.02.

Some users have reported the newest version on android have some problems, no just this app, other apps too, @Navat604 have provided a download link to use the smartthings android app v 1.6.9, you can try his recommendation, With iphone I have not problems.
A known problem is with schedule functions, smartthings have problems and this function crash some times. but if you try some times the devices can be added.

@rog - how did you set up your Rocki to get this working properly? All my does is play “deh” sound.

This is a fantastic idea! I can’t afford Sonos speakers and thought that I was out of luck! I was able to find my Linksys Wireless AC1200 repeater that has DLNA capability but it says “No Connect” on the things page. Any idea what might be the problem?

Hi @camdenkrupala, Great news, Could you get me more info?
In wich step from the instalation are you?
Have you readed the first post?