QS-Zigbee-D02 Device Hander for 2 Gangs dimmer

Can’t find anything like “Zigbee Dimmer Multi”. All I can find is what I squared in red:
image

Correct, I don’t think one has been provided. But the two people in that other thread have been trying to build one, so you might see how far they have gotten.

Hello
Any luck with 2 gang / both gangs? Do you have working DTH or Edge driver?
Or… Do you have fingerprints?

I think that you own something like this.

Im also interested…

Take a look here:

Seems like a working multi dimmer solution

Just sharing information.

Tried pairing again and found that this 2 gang module works currently just fine but only as switch (not dimmer) with driver from @iquix :wink:

2 Likes

This DHT approved to be working with Multi-Dimmers.

@Mariano_Colmenarejo , can you please try to convert to Driver ? Is multi-dimmers support in drivers ? I can provide some logs if required.

> [{modelID: 'TS110F', manufacturerName: '_TYZB01_v8gtiaed'}
> {modelID: 'TS110E', manufacturerName: '_TZ3210_pagajpog'}]
The raw description: 01 0104 0101 01 05 0000 0004 0005 0006 0008 02 0019 000A

Thanks !!

Hi @dotan_shai

This will take me a while, I have to create new profiles and a child device with level capability and its code.

When I have a trial version I’ll let you know.
I would like to have the complete information of the fingerprints to see the endpoints that it uses

1 Like

Hi @Mariano_Colmenarejo
Here are some logs and Zigbee Thing MC screen shot:
image

I hope you have all the information required.

Hi @dotan_shai

Published this driver Test version with profile switch-level and child-switch-level
Child device created for switch2 componente are capabilities switch and level
Child device for All switch on-off are only switch capability same to previous version

You only send to me the clusters for one device, I hope the other device does not use cluster EF00

───────────────────────────────────────────────────
 Name         Zigbee Multi Switch and Child Test   
 Version      2022-11-11T11:36:28.811432227        
───────────────────────────────────────────────────
  - id: "TS110E/_TZ3210_pagajpog"
    deviceLabel: TS110E Dimmer
    manufacturer: _TZ3210_pagajpog
    model: TS110E
    deviceProfileName: two-switch-level
  - id: "TS110F/_TYZB01_v8gtiaed"
    deviceLabel: TS110F Dimmer
    manufacturer: _TYZB01_v8gtiaed
    model: TS110F
    deviceProfileName: two-switch-level

Hi @Mariano_Colmenarejo ,
The Driver is working fine for MAIN switch only. No dimming option for the second dimmer. Here are some screenshots:
Main dimmer - No problems ON/OFF and dimming
image
2nd dimmer - ON/OFF ok, dimming not exist
image

If you need logs, please let me know

Hi @dotan_shai

Try with this driver version

───────────────────────────────────────────────────
 Name         Zigbee Multi Switch and Child Test
 Version      2022-11-11T17:58:43.767429491
───────────────────────────────────────────────────

Hello
Working switch and dimming on both channels :slight_smile:
Device: qs-zigbee-d02-triac-2c-ln

Yet upon clicking tile i get message that it cant retrieve device status.

And in settings clicking option to create single device to switch2 apears nothing happens.

Thanks anyway !!! :sparkles:

I’m still having the same problem, only Main channel can be dimmed.
2nd dimmer only ON-OFF NO DIMMING
Here are some logs…

Update !! When removing child and using from single control, everything works fine.
When re-creating child device dimming appears in child :slight_smile: but dimming is not effecting the bulb

1 Like

Well, in the logs several level events are seen for the switch2 component.
And for other user @dusanhauko works

2022-11-11T19:54:19.505722518+00:00 INFO Zigbee Multi Switch and Child Test <ZigbeeDevice: 70bd7016-88b1-4306-9fb4-f0c286b16076 [0xDE88] (TS110F Dimmer)> emitting event: {“attribute_id”:“level”,“capability_id”:“switchLevel”,“component_id”:“switch2”,“state”:{“value”:53}}

Could you send me the clusters of this device with zigbee Thing Mc?
Was the child device created?

From where are you executing the level changes, from the physical device?, I don’t see that you are executing it from the app

I don’t see level events in the logs for the main component (switch1)

Delete the child device
Install this version
create child device and try again

───────────────────────────────────────────────────
 Name         Zigbee Multi Switch and Child Test   
 Version      2022-11-11T21:06:38.868237413        
───────────────────────────────────────────────────

image
I’ve updated my previous comment. I’ll let you know tomorrow regarding this version…

1 Like

This version fix the problem

───────────────────────────────────────────────────
 Name         Zigbee Multi Switch and Child Test   
 Version      2022-11-11T21:26:27.125378793        
───────────────────────────────────────────────────

Hi,
Seems that you didn’t publish this version. This is what i’m getting from you Channel

Sorry, published now

Unfortunately this driver still not working fine. Please refer to the attached video, notice that trying to adjust level of child driver if bringing back the initial level. While no effect in light dimming.
More logs will be send tomorrow:

NO Problems if controlling from single control without child

Hi @dotan_shai

This version must fix the problem

───────────────────────────────────────────────────
 Name         Zigbee Multi Switch and Child Test   
 Version      2022-11-13T18:15:32.441461963        
───────────────────────────────────────────────────