Well I can verify at Lowes’s does in fact sell this door. And it does get picked up on smartthings when you try to add a new device it appears it only needs to be programmed. It utilizes zigbee. I am in dire need as to how to program this dog door

Once it is added to ST, can you try logging into the IDE and clicking on it under MyDevices? There should be a field Raw Description. What’s in that field?

Name Thing Label Thing Type Unknown Version Published Zigbee Id 00124B000253A23C Device Network Id 8BED Status ACTIVE Hub Home Hub Date Created 2015-01-17 10:10 AM EST Last Updated 2015-01-17 10:11 AM EST Data No data found for device Raw Description 0C 0104 000A 00 06 0000 0001 0003 0009…

Looks like a zigbee lock which may not be supported yet. @duncan has this changed or is a firmware update still needed? [image] Door Locks Fully Supported by ST's Connected Things ZigBee locks are not yet compatible; there are firmware changes required.

if it isn’t supported is there a way to skin this with a smart app?

Usually when ST says there is a firmware update required it means the device uses features of Zigbee that ST hasn’t implemented yet, so there might not be anything we can do. It’s probably the security protocols or lock code features. We might be able to get basic lock/unlock to work unless we need …

Honestly it is paired but it doesn’t do anything at all i need at this point is to lock unlock the door and being able to set it for at time so m-f unlock at 9am

I’m flying blind without a device to test, but try the below code for the device type. A lot of the pieces won’t work, but I think it should be able to lock and unlock. Hopefully that works, and if you send me the live logs from a lock, unlock and refresh command; I might be able to refine it (if it…

ok none of the app works it will not lock or unlock the door in any capacity here’s the log 11:38:48 PM: debug Executing 'poll’ 11:37:42 PM: debug Executing 'unlock’ 11:37:26 PM: debug Executing 'lock’ 11:37:09 PM: debug Executing 'unlock’ 11:36:30 PM: debug Configuring Reporting and Bindings. …

if it helps the battery percentage isn’t showing either.

PetSafe SmartDoor Model HPA15-13808 (DTH in post 27)

Devices & Integrations

Sticks18 (Scott G) January 17, 2015, 3:38pm 4

Looks like a zigbee lock which may not be supported yet. @duncan has this changed or is a firmware update still needed?

Topic		Replies	Views
[OBSOLETE] Enhanced Z-wave garage door opener code (for Linear GD00Z and variants) Community Created Drivers dth_garage	193	32529	December 20, 2022
Pet door project Projects & Stories project_pets , project_animals	51	23721	December 17, 2021
Schlage Z-wave Lock Command Works Occasionally Connected Things	52	11447	July 23, 2016
[RELEASE] Sure PetCare (Connect) V1.2c Community Created Drivers project_pets , dth_pets	75	11847	August 5, 2023
How to CORRECTLY pair a Aeotec Recessed Door Sensor 7 with a hub Devices & Integrations	19	5124	December 27, 2022

PetSafe SmartDoor Model HPA15-13808 (DTH in post 27)

Related topics