Ideas to connect detached garage (Out of range of main hub)

[JDRoberts]

This topic might give you some ideas, but basically you’re going to have to have something mains powered within 100 feet of the building. Then it has to be within 100 feet clear of something mains powered in the house.

Once you’re indoors, range per hop will drop to 30 - 50 feet, just depending .

How to troubleshoot a connection with an outbuilding

So I have a couple issues…I’m not sure the best way to troubleshoot. I have a GE/Quirky Tripper sensor on my front door that isn’t always registering with my Hub. Sometimes its open issues, sometimes it’s close issues. I have a Cree Zigbee bulb 5 feet away that should mesh back to the hub. My backdoor sensor is working fine… I installed a Linear FS20Z-1 Z-Wave on my garage opener. It is not working all the time. I would say 50% of the time it works. There is a Ecolink Z-Wave Wireless Tilt Sensor in the garage that always registers. It is not far from the hub. [image] The hub is sitting on a nightstand in the window on the left, the Linear is up on the opener. Suggestions? First steps?