Hi All, Very new to groovy here. I know this topic has been covered before but trying the solutions I’ve found just don’t seem to be working for me. I’m trying to port an app I have working on Hubitat but getting stuck. I recognize that an httpGet command is sent from the cloud so it won’t work wi…

I successfully do a local HTTP GET in the below device driver: https://raw.githubusercontent.com/DaveGut/bleBox-SmartThings/master/devicetypes/davegut/blebox-switchbox.src/blebox-switchbox.groovy Look at the method sendGetCmd.

You have to check if the IP and port values your settings return are encoded properly. Go to your device and see if you have settings.embyServerIP like 192.168.x.y or something like C0A80131 Same for the port. To work properly your DTH should have as a device network id the encoded value of your…

Thank you. I’ve been playing with this for a few days in my spare time and just not wrapping my head around a solution. Using getDataValue to get the IP in hex is giving the same MissingMethodException error. I notice the link is for building a device type and the example is for a device driver. C…

Thank you very much! That’s exactly the direction I needed. I’ve got this portion working perfectly now def getClientsJSON() { def result = new physicalgraph.device.HubAction( method: "GET", path: "/emby/Devices?&api_key=${settings.embyApiKey}", headers: [ "…

Maybe you could help me through one more sticking point. I’ve got Emby sending a webhook on playback events and can confirm the Emby server is sending them through the server logs. I also have it send a duplicate webhook to my hubitat system which is being received. 2020-03-18 15:11:39.457 Info Ht…

it’s difficult for me to advise as I I don’t know all the tenets of your setup but I would try to mimic the setup with something you totally master like taking a raspberry and a http server that act like the json generator. if it works then you can isolate something like your query being wrong in t…

Thanks for the insight. I’ve reached out to the Emby dev team on this as well. I can punch in the same webhook address into Plex and the webhook is received by the app. However when I put that address into Emby, there is no activity in the ST logs and the Emby logs are showing a 500 error. I wond…

Maybe using wireshark to spy the traffic between your working case and your non working case will help you further but you’ll need some traffic forwarding capabilities in your network/router,

[image] Philippe_Portes: Maybe using wireshark to spy the traffic between your working case and your non working case will help you further but you’ll need some traffic forwarding capabilities in your network/router, Good idea! I’ve got a new ISP coming in on Sunday so I’ll have the ability t…

httpGet for local IP

Developer Programs Writing SmartApps

Philippe_Portes (PPO16) March 18, 2020, 5:20pm 5

You might want to check this post where the folk did it in smartapp at that time. Http Post to local lan using sendHubCommand in SmartApp?

Topic		Replies	Views
Http Get request Writing SmartApps	14	9092	April 20, 2017
Perform HTTP GET Request towards local server Writing SmartApps	3	579	February 19, 2021
Sending GET requests General Discussion devicetype , developers	2	2704	March 30, 2016
Local Network HTTP/s Or Internet HTTPS with Authentication Writing SmartApps	19	8769	September 9, 2015
Can't figure out hub to device over http Devices & Integrations	6	2985	July 7, 2015

httpGet for local IP

Related topics