No, the problem not solve and i had to return product, do you have same issue?
Your device seems to be discover as sleepy device. Is it no neutral device? If yes, it seems that your problem is reception problem. Can you add a repeater nearby?
Please note that my device discovered as a Router. My device requires a neutral wire. I have a different problem the EF00 in my discoverable fingerprint is Tuya protocol which is not supported by Zigbee Multi Switch generic Handler. I hope someone can help and add it to the generic Handler…
The device is very close to hub 1m . it seems this device only can be discovered as SLEEPY_END_DEVICE and not ROUTER
Also it seems in AliExpress there is 2 types, one with Zigbee 3.0 and other not 3.0
This one which has no Zigbee 3.0
Hi. I opened up my tuya ZigBee 3 device…
It is exactly the same as the WiFi one I have, except from the communication board.
The ZigBee one has a TYZS3 module.
Not sure if this helps or not…
It will be discover as a ROUTER if the device have a connection to Live and Neutral wire.
If No Neutral and only Live, than it will be discover as SLEEPY_END_DEVICE.
Zigbee 3.0 is irrelevant .
So is your device have No Neutral connection ?
Correct, my device has no neutral
Maybe this is the reason, it is discovered as SLEEPY_END_DEVICE and connect for 2 minutes then turn OFF and goes to sleep!!
I have the same issue and have been banging my head off the wall for the past day trying to figure it out.
If the device is a - Sleepy Endpoint Device : A device that is usually battery powered and spends most of it’s time in a low-power sleep mode. It will periodically wake up to send messages -
Does this mean that a change to the device handler requesting it to send a status alert or some other message every minute (while turned on) would keep the device awake or perhaps this is not the issue?
I would really love some input from someone with a bit more experience with smartthings devices and groovy.
check this out
Big credit to @WooBooung, I managed to add my custom Tuya 4-gang device fingerprint and it just work! Saved me tons of hassle. Its a well thought generic multi gang switch DH made by @WooBooung and it seems to fit a lot of devices and the supported device list still keep growing!
All you need is to follow the instruction and derive your device fingerprint from your device raw description. Then add the your switch gang number in the getMODEL_MAP() function. Save and deleted my device and re-discover it again and it already show the device with my previously coded description name instead of a “Thing” with all child switches automatically added correctly! Just work like a charm. Its pretty much straight forward.
I guess we can help grow the supported list by adding more fingerprint into that DH.
Nice job !! But , I haven’t saw in woobooung handler any devices containing the EF00 in the fingerprint. See also my 1st message
I posted. Any chance it will work ? I understand the the EF00 is Tuya specific protocol , that needs special treat.
I asked the developer and will post here when he’ll reply back.
Try this Device Handler from YooSangBeom - GitHub.
This one works the best for me. I have some problems with configuring buttons but at least smartthings recognize it as remote and not “thing”.
I have Tuya Zigbee 3Gang remote (no wires)
Hi, had you any reply from @woobooung?
I’m having the same problem with a Lonsonho 2 gang switch. It turns off every 2minutes
For those who had the 2 minutes off issue check this out https://community.smartthings.com/t/uk-light-switches-my-experiences-2020/196035/67
Add your switch manufacturer to the Orbivo bool function and should fix that 2 minutes off issue.
This DTH works best for me - allows me to reliably add automations for this 3 button battery operated 1 gang switch Tuya/Bakeey (Zemismart)
Just needed to add the manufacturer code :"_TZ3000_a7ouggvs". Made a PR here: Add ST support for Tuya/Bakeey (Zemismart) 3 button by daltskin · Pull Request #2 · YooSangBeom/SangBoyST (github.com)
Great progress in Habitat (HE) forum , they manage to get 3 gangs and dimmer switch that contain the EF00 cluster to work. if some can convert to Smartthings it will be great. A reminder , this is my readings:
- application: 52
- endpointId: 01
- manufacturer: _TZE200_5apf3k9b
- model: TS0601
- onOff: catchall
- zigbeeNodeType: ROUTER
Raw Description :
01 0104 0051 00 05 0000 000A 0004 0005 EF00 01 0019
Hey @dotan_shai how can I discover my switch complete information?
The model, manufacturer etc?
You can find it when logging to your IDE account here:
After logging select you location and under my devices select any device you want
i searching for the same things great discover but how will convert it to smartthings?
This is an issue for sw engineers.
I understand in hw. Also, I have some examples for Tuya protocol handlers but not for two gangs switch. If you think you can help. PM me and I’ll be happy to send you a module for DH development…
Thanks for your help so is some example not working device handler… So can you post it here maybe help me meybe not cause I do not know much about developing…
I thought that was easy someone that have small knowledge of smartthings handlers to convert the hubitat one
i have xreate also this thread
the only way is to donate someone to do it for us… as we do not know how
i create a handler that work with it but only the 1st of the 3 gangs is a good start at least