I mostly did a rewrite of my Foscam HD device type. This device type should support all Foscam cameras using an internal IP address, HD and non-HD versions. The alarm and IR lights can be controlled. PTZ functionality is also included. This will still work with SmartApps that I created for Foscam ca…

[image] eparkerjr: Did the Device Network Id change to the hex version of the IPaddress? Do you have your hub selected in the device settings Did you select the HD Foscam Camera option? Yes Yes Yes thanks for your continued assistance.

@pitchdarkice Can you post more of the log? Mask out your personal information.

This works nicely with my 8910w on my local network… thanks @eparkerjr and @tslagle13 ! Will this also work remotely if I use ddns?

Thanks for the awesome work, love the fact that it works with the internal IP address. To get it working with my FI9821W V2 I had to change the following lines from the original source: 200: return “usr=${username}&pwd=${password}&” 217: uri = apiCommand + getLogin() I’m using the lat…

@jdrorrer Right now this is only for internal use. There is a Foscam device type by imbrian in the forums that will work for external use.

Updated with PTZ controls. I know SmartThings is working on an official device type for Foscam cameras, so if you guys feel like pulling anything out my device type to add to it then feel free.

Should this also work with a FI8908W? Not having luck with it.

@sgonsalves It should work. I have a FI8906W and FI8910W and it works with both of those. Can you confirm you have a hub selected with the right internal IP and port?

With a FI9821W V2 when the alarm activates it removes other alarm configuration like schedule, email, sensitivity etc. Is this just me? Using the same device type works fine for email alarms on my other two non-HD cameras turning on and off the alarm.

Foscam Universal Internal Device Type (HD\Non-HD with Alarm\LED\PTZ Control)

Devices & Integrations Community Created Drivers

eparkerjr (skp19) August 11, 2014, 4:12am 14

@jscoleman That’s weird. I have 3 FI9821W V2 cameras and they all work for me with the newest firmware. I’ll swap it around in the next update just to avoid problems for anyone else.

Topic		Replies	Views
[OBSOLETE] Foscam Camera Device Handler Universal DTH with Motion Detection - SD (FI89xx), HD Ambarella FI98xx, FI99xx, Cx, Gx, Rx, Ex, Zx, Fosbaby Community Created Drivers dth_security , smartapp_security , dth_cameras , rboyapps	1358	200636	April 23, 2021
Foscam HD Camera Device Type Devices & Integrations	33	15942	October 2, 2017
Pairing a Vistacam Connected Things	54	13553	October 5, 2017
Generic Camera Device using local connection (new version now available) Community Created Drivers dlink , panasonic	505	85654	May 25, 2020
Authenticate Foscam IP camera for HTTP Post Commands General Discussion archive_developers	36	8153	May 4, 2014

Foscam Universal Internal Device Type (HD\Non-HD with Alarm\LED\PTZ Control)

Related topics