Color Indicator split into 255 segments

[GSzabados (Gabor Szabados)]

Have you looked at these topics?

[OBSOLETE] New Milight / Easybulb / LimitlessLED integration

This is gone now: Device type for MiLight / EasyBulb / LimitlessLED Wifi controller - #205 by brianfreund And if you want to involve something other than your hub, you can use this: Integration of MiLight, LimitlessLED, Easybulb, etc (2 methods) - #21 by brianfreund But ultimately, the problem is that the limitlessled hubs kind of suck, and they need to be better. There’s a better way! Throw away your hub! You shouldn’t be limited to only four groups per hub anyway. This way, you have one hub that controls everything rather than only groups of four. Try my approach: make a better hub for less than $10 out of parts you get from Amazon, and use my integration. The integration: Christopher Mullin’s awesome work in setting up a hub: http://blog.christophermullins.com/2017/02/11/m…

Device type for MiLight / EasyBulb / LimitlessLED Wifi controller

Hello, I’ve sunset this project and open sourced what I’ve been running in Azure for the last 1.5 years. SmartThings is no longer my choice for home automation and as such I have no further interest in innovating for a platform I don’t use. I welcome anyone to use what I’ve started and continue the service. You can find me and my work on the home assistant forums. Adios amigos, jared

Integration of MiLight, LimitlessLED, Easybulb, etc (2 methods)

Hopefully this helps other users avoid the headaches I found while trying to integrate my Milights with Smartthings. In the following instructions substitute MiLight with Limitless LED, Easyblub, etc since as far as I’m aware they all work the same or just as a general purpose URL requester. Here is the Android method:($3.90 for Google App) Requirements: -My MiLight app installed to SmartThings (code listed below and also hosted on BitBucket: https://bitbucket.org/BrianFreund/http-url-requester) -The MiLight Controller (know the IP and Port it’s using) -$3.90 for the App Store on Google -An Android phone on the network capable of running the app “Automagic * Automation” & “UDP Sender” (Also need the IP address for this) Download and install an app called Automagic * Automation ($3…