# You Don't have Any Hubs yet - Error message - Help Please

**URL:** <https://community.smartthings.com/t/you-dont-have-any-hubs-yet-error-message-help-please/70214>\
**Category:** General Discussion\
**Tags:** hubv2\
**Created:** [December 28, 2016, 6:50am UTC](https://community.smartthings.com/t/you-dont-have-any-hubs-yet-error-message-help-please/70214 "2016-12-28T06:50:41Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Danbie](https://avatars.discourse-cdn.com/v4/letter/d/a88e57/32.png) [@Danbie](https://community.smartthings.com/u/Danbie)\
**Post date:** [December 28, 2016, 6:50am UTC](https://community.smartthings.com/t/you-dont-have-any-hubs-yet-error-message-help-please/70214/1 "2016-12-28T06:50:41Z")

</div>

I have just begun setting up Smartthings in my house. I have a V2 hub, a couple of switches, and a flood monitor. All of these are working as expected using the ST mobile app. I also have a Google Home and I can control the switches nicely with voice. All is going great …  
Next I want to tell Google Home “I’m going to bed” or something like that so it will shut off the appropriate lights. I would like to define a routine to manage the transition to this “state”. After some reading I learn that the best way to do this is to create a virtual switch and have Google Home switch that and have that switch execute the appropriate routine.

As I begin this journey I get an error that I don’t have a hub yet and to use Smartthings mobile app to connect it. Specifically it says …  
"You don’t have any hubs yet. Please use the SmartThings mobile app to claim your hub."  
This really confuses me. I have already connected my Smarthings hub using the 6 digit welcome code that came with the hub and it’s working fine. I don’t see where to go on the mobile app (IOS) to “claim” my hub. I checked and rechecked that I am using the correct email account. Any help would be greatly appreciated …  
I am in the US if that is important to know …

---

<div class="post-metadata">

**Author:** ![steve\_t](https://avatars.discourse-cdn.com/v4/letter/s/b19c9b/32.png) [@steve\_t](https://community.smartthings.com/u/steve_t)\
**Post date:** [December 28, 2016, 9:54am UTC](https://community.smartthings.com/t/you-dont-have-any-hubs-yet-error-message-help-please/70214/2 "2016-12-28T09:54:31Z")

</div>

Login into the IDE,  
Click "My Locations"  
It’ll get you to login again  
Then click “My Hubs” and it should show up

---

<div class="post-metadata">

**Author:** ![Danbie](https://avatars.discourse-cdn.com/v4/letter/d/a88e57/32.png) [@Danbie](https://community.smartthings.com/u/Danbie)\
**Post date:** [December 28, 2016, 6:42pm UTC](https://community.smartthings.com/t/you-dont-have-any-hubs-yet-error-message-help-please/70214/3 "2016-12-28T18:42:08Z")

</div>

Thanks Steve! That worked 😀 ! I would have never guess to do that.

Cheers,  
Dan

---

<div class="post-metadata">

**Author:** ![GregBikes](https://avatars.discourse-cdn.com/v4/letter/g/d9b06d/32.png) [@GregBikes](https://community.smartthings.com/u/GregBikes)\
**Post date:** [May 24, 2017, 7:23pm UTC](https://community.smartthings.com/t/you-dont-have-any-hubs-yet-error-message-help-please/70214/4 "2017-05-24T19:23:25Z")

</div>

I am having the same problem but I am not being asked to log in again. It says I don’t have a hub even though I registered through the iphone app. I’m stumped.

---

<div class="post-metadata">

**Author:** ![McKulty](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/mckulty/32/76766_2.png) [@McKulty](https://community.smartthings.com/u/McKulty)\
**Post date:** [January 9, 2018, 7:56pm UTC](https://community.smartthings.com/t/you-dont-have-any-hubs-yet-error-message-help-please/70214/5 "2018-01-09T19:56:30Z")

</div>

> [@steve\_t](#):
>
> It’ll get you to login again

IT DOESN’T! Sorry. Very frustrated.

---

<div class="post-metadata">

**Author:** ![WB70](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/wb70/32/95668_2.png) [@WB70](https://community.smartthings.com/u/WB70)\
**Post date:** [January 9, 2018, 8:43pm UTC](https://community.smartthings.com/t/you-dont-have-any-hubs-yet-error-message-help-please/70214/6 "2018-01-09T20:43:50Z")

</div>

> [@McKulty](#):
>
> IT DOESN’T! Sorry. Very frustrated.

In a browser:

If you login to [https://account.smartthings.com](https://account.smartthings.com) then select Locations and you select the Location, do you see your Hub?

Also is there only one Location or do you see multiple?

---

<div class="post-metadata">

**Author:** ![McKulty](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/mckulty/32/76766_2.png) [@McKulty](https://community.smartthings.com/u/McKulty)\
**Post date:** [January 10, 2018, 5:58am UTC](https://community.smartthings.com/t/you-dont-have-any-hubs-yet-error-message-help-please/70214/7 "2018-01-10T05:58:03Z")

</div>

The Smartthings chat guy helped me figure it out.

I had two login profiles, one for Smartthings and one for Samsung.

I created my location and added the hub using the Samsung account.

For some reason I switched and started using the ST profile (bc ST, right?)  
and didn’t realize that’s when my hub disappeared.

I logged off everything just quit using the ST login profile at  
[https://graph.api.smartthings.com/](https://graph.api.smartthings.com/).

Tech Supp said they’re in process of consolidating the login and when I  
logged out and in again from Android, it gave me a checkbox for “combining  
under one login.” Problem gone.

---

<div class="post-metadata">

**Author:** ![McKulty](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/mckulty/32/76766_2.png) [@McKulty](https://community.smartthings.com/u/McKulty)\
**Post date:** [January 10, 2018, 5:59am UTC](https://community.smartthings.com/t/you-dont-have-any-hubs-yet-error-message-help-please/70214/8 "2018-01-10T05:59:33Z")

</div>

The Smartthings chat guy helped me figure it out.

I had two login profiles, one for Smartthings and one for Samsung.

I created my location and added the hub then inexplicably switched  
profiles.

No problem no more.
