Xiaomi WXKG03LM — Help needed

[veeceeoh (Keith G)]

First off, for both the WXKG02LM / WXKG03LM Aqara Smart Switches, you need to use the correct custom device handler that I made, which is here.

Also, there are two revisions of the WXKG02LM / WXKG03LM smart switches, a 2016 revision which only supports single-press functionality, and a 2018 revision that supports single- and double-press, and hold.

See this post for more information:
(make sure to scroll down to the header " [RELEASE] Aqara Wireless Smart Light Switch DTH v0.9.2")

[OBSOLETE] Original & Aqara Xiaomi Zigbee Sensors (contact, temp, motion, button, outlet, leak, etc)

[UPDATE] “Original” Xiaomi Button DTH v1.3 For Xiaomi’s round button, model WXKG01LM [button] This release adds support for previously hidden functionality that has been “revealed” with firmware version 25.26. Because Hub Firmware 25.26 is required, this new DTH should only be used by SmartThings Hub v2 and v3 users. Let me repeat that: NOTE: This updated DTH only works with Hub Firmware 25.26 or higher, which is currently only available for SmartThings v2 or v3 Hubs The updated Xiaomi Button DTH code can be found here. NOTE: After updating to the new DTH, open the preference settings for your button in the SmartThings “Classic” Mobile App and then press “Save”. This will set up the correct increased number of buttons available for automations. If you don’t have a SmartThings v2 or v…

Also, see this post with information on how to identify the revision of your WXKG02LM / WXKG03LM smart switches:

[OBSOLETE] Original & Aqara Xiaomi Zigbee Sensors (contact, temp, motion, button, outlet, leak, etc)

[WIKI] How to find your Aqara Button or Wireless Switch model If you have an Aqara Button: [aqarabutton] There are three versions, each with different functionality: Model Revision ZigBee Model ID Functions WXKG11LM original lumi.sensor_switch.aq2 Single, Double, Triple, & Quad-click WXKG11LM new lumi.remote.b1acn01 Single/Double-click, Hold, & Release WXKG12LM lumi.sensor_switch.aq3 Single/Double-click, Hold, Release, & Shake * Note: Sometimes the ZigBee Model ID for model WXKG12LM is truncated (cut off), so “lumi.sensor_swit” might be seen instead of “lumi.sensor_switch.aq3”. The product model is printed on the back: [Aqara_2_Models] If you are using model WXKG11LM, then there are two revisions, only identified by checking the ZigBee Model ID after pairing the butto…

Let me know if you have any other questions after you’ve got the correct device handler installed.