Wink new devices, TAPT switch, Tripper door sensor, Spotter multi sensor, Norm thermostat, Outlink Outlet

[mattjfrank (Matt)]

I’ve created a new thread for Tapt, it includes an initial device type now that I got it connected to Smart Things. Thanks @smwein

Quirky GE Tapt Switch Device Type

Device Type for Quirky / GE Tapt Switch Using a dual load Zigbee Device Type written by @JohnR I have created a starting point for the Tapt Switch. I’ve read this device can control a load and also a scene/mode. Not sure how the second part works but I’ve gotten the switch to be controllable. Installation Instructions 1- Login to the IDE and create a custom device type using the device type for from my github https://github.com/mattjfrank/Quirky-GE-Tapt-Switch-Smart-Things-Device-Type/blob/master/Quirky-GE-Tapt-Switch.groovy once created, save and publish. 2- Add Tapt to SmartThings by pressing and holding both buttons for 5 seconds while ST is looking for new devices. 3- The device should show up as “Quirky GE Tapt Switch” If it doesn’t manually change it to that device type. …