# What is Mariano Shared Beta Driver? **URL:** \ **Category:** Community Created Drivers\ **Created:** [December 11, 2022, 10:05pm UTC](https://community.smartthings.com/t/what-is-mariano-shared-beta-driver/253875 "2022-12-11T22:05:47Z")\ **Posts on this page:** 1\ **Showing post:** 73
**Author:** ![Mariano\_Colmenarejo](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/mariano_colmenarejo/32/220132_2.png) [@Mariano\_Colmenarejo](https://community.smartthings.com/u/Mariano_Colmenarejo)\ **Post date:** [December 20, 2023, 8:15am UTC](https://community.smartthings.com/t/what-is-mariano-shared-beta-driver/253875/73 "2023-12-20T08:15:57Z")
Hi, @renesys Bit2 is reserved and any value is valid, the device may always have it at value 1, but the important thing is bit3 and 4 and with the value 28 they are at value 1. (0001 1100). In the dth, readme.md file comes a note that says that the illuminance value is sent in % instead of lux. > **NOTES** Illuminance is reported as percentage (%), not lux. Unfortunately I don’t have the formula how this percentage is calculated. It is possible that device is sending a value that produces an error in the libraries default hadler. install the CLI and capture driver logs by varying the light, see what it sends. This is a tutorial on how to do it. > [@Edge Driver or Device Handeler for a TUYA (Zemismart) Zigbee plug with energy mesurment capabilities](https://community.smartthings.com/t/edge-driver-or-device-handeler-for-a-tuya-zemismart-zigbee-plug-with-energy-mesurment-capabilities/245383/18): > > Install CLI on your computer: • You have to download from this link lastet release of the compressed file smartthings-win.zip, if you use windows or the one necessary for your operating system • In that link you also have installation help, use and all the commands you can use [smartthings-cli/packages/cli at master · SmartThingsCommunity/smartthings-cli - smartthings edge:channels:update [ID] ](https://github.com/SmartThingsCommunity/smartthings-cli/tree/master/packages/cli#smartthings-edgechannelsupdate-id) • Unzip it and move the smartthings.exe file to a folder on your computer from where it will be used. for example to a new folder in documents/CLI • You have to open the windows powerShell terminal window and you have to go to the directory (folder) where the smarttings.exe file is. • Use the DOS commands “cd…” to move down directory and “cd directory name” to move to that directory. This is a… --- _[View the full topic](https://community.smartthings.com/t/what-is-mariano-shared-beta-driver/253875)._