# What Edge driver for SmartThings Multi Sensor & Monoprice 4 in 1 **URL:** \ **Category:** Connected Things\ **Created:** [January 15, 2023, 10:39pm UTC](https://community.smartthings.com/t/what-edge-driver-for-smartthings-multi-sensor-monoprice-4-in-1/256343 "2023-01-15T22:39:52Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![joelw135](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/joelw135/32/70639_2.png) [@joelw135](https://community.smartthings.com/u/joelw135)\ **Post date:** [January 15, 2023, 10:39pm UTC](https://community.smartthings.com/t/what-edge-driver-for-smartthings-multi-sensor-monoprice-4-in-1/256343/1 "2023-01-15T22:39:52Z")
I have a ST Multi sensor and a Monoprice 4 in 1, need an Edge driver. Is there one? ---
**Author:** ![mlchelp](https://avatars.discourse-cdn.com/v4/letter/m/bcef8e/32.png) [@mlchelp](https://community.smartthings.com/u/mlchelp)\ **Post date:** [January 15, 2023, 11:01pm UTC](https://community.smartthings.com/t/what-edge-driver-for-smartthings-multi-sensor-monoprice-4-in-1/256343/2 "2023-01-15T23:01:50Z")
@joelw135 ST Multi sensor works perfectly with Zigbee Contact MC. Mariano’s channel invite below. > **[One simple home system. A world of possibilities. | SmartThings](https://account.smartthings.com/?redirect=https%3A%2F%2Fapi.smartthings.com%2Finvitation-web%2Faccept%3Fid%3D6b68563b-1905-4654-8d2b-e677a2997424)** > > Build a smart home to support all your big moments. With SmartThings, your home becomes a connected space that makes your life simpler, safer, and more entertaining. ---
**Author:** ![mrfitz98](https://avatars.discourse-cdn.com/v4/letter/m/f0a364/32.png) [@mrfitz98](https://community.smartthings.com/u/mrfitz98)\ **Post date:** [January 15, 2023, 11:12pm UTC](https://community.smartthings.com/t/what-edge-driver-for-smartthings-multi-sensor-monoprice-4-in-1/256343/3 "2023-01-15T23:12:50Z")
I’m using my monoprice 4-1 with Mariano’s Z-Wave Sensor and Child Thermostat Mc driver. Works great. ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [January 15, 2023, 11:28pm UTC](https://community.smartthings.com/t/what-edge-driver-for-smartthings-multi-sensor-monoprice-4-in-1/256343/4 "2023-01-15T23:28:57Z")
I am using mine with @philh30 “Z-wave sensor PH” driver. It gives you access to all the settings. ---
**Author:** ![joelw135](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/joelw135/32/70639_2.png) [@joelw135](https://community.smartthings.com/u/joelw135)\ **Post date:** [January 15, 2023, 11:43pm UTC](https://community.smartthings.com/t/what-edge-driver-for-smartthings-multi-sensor-monoprice-4-in-1/256343/5 "2023-01-15T23:43:37Z")
I have no luck with these drivers. The Multi Sensor shows no Humidity. The 4 in 1 doesn’t even show as an available driver for the device. Any ideas? ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [January 15, 2023, 11:51pm UTC](https://community.smartthings.com/t/what-edge-driver-for-smartthings-multi-sensor-monoprice-4-in-1/256343/6 "2023-01-15T23:51:15Z")
This is what it looks like using @philh30 driver: ![Screenshot_20230115-184932](https://global.discourse-cdn.com/smartthings/original/3X/f/6/f6716df26b3465e59e72bf562e1e1e978dbccbcc.png) ![Screenshot_20230115-184955](https://global.discourse-cdn.com/smartthings/original/3X/5/8/583d339de62104c08c80110a7bb3225a2d8400e6.png) ---
**Author:** ![mlchelp](https://avatars.discourse-cdn.com/v4/letter/m/bcef8e/32.png) [@mlchelp](https://community.smartthings.com/u/mlchelp)\ **Post date:** [January 16, 2023, 12:10am UTC](https://community.smartthings.com/t/what-edge-driver-for-smartthings-multi-sensor-monoprice-4-in-1/256343/7 "2023-01-16T00:10:45Z")
> [@joelw135](#): > > The Multi Sensor shows no Humidity. Wow I didnt even notice that, I only use these for vibration detection. Sorry, that is the only driver I was able to find. You would think that Smartthings would have a driver to support it! If you ask Mariano im sure he will add it for you. Post a message to him in. > [@(EDGE Driver-Mc): Zigbee Drivers for Motion, Open/Close, Moisture, Smoke-Co Sensors and others Devices](https://community.smartthings.com/t/beta-zigbee-edge-driver-compatible-with-lidl-ecosmart-osram-smartthings-others/231689): > > Updated list of Edge Drivers published in my channel (New RELEASE) New Edge Drive Zigbee Light Multifunction Mc: This Driver has all the functions of the Zigbee Level ColorTemp Bulb Mc driver, which it replaces and will not be updated any more. Added Color Control Capability with profiles for RGB and RGBW with 2700k-6500k Color temperature. Thanks to the suggestion and collaboration to do the tests for @milandjurovic71 Works with lights, led strips with profiles : Switch & Level Switch, Level & ColorTemperature Switch, Level, RGB, RGBW, RGBCCT, CCT Could work with zigbee single dimmers, but not tested [Link to the Zigbee Light Multifunction Mc Driver Thread](https://community.smartthings.com/t/new-release-beta-edge-driver-zigbee-light-multifunction-mc/234387) Included Devices : See this link [https://community.smartthings.com/t/new-release-beta-edge-driver-zigbee-light-multifunc…](https://community.smartthings.com/t/new-release-beta-edge-driver-zigbee-light-multifunction-mc/234387) ---
**Author:** ![joelw135](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/joelw135/32/70639_2.png) [@joelw135](https://community.smartthings.com/u/joelw135)\ **Post date:** [January 16, 2023, 12:26am UTC](https://community.smartthings.com/t/what-edge-driver-for-smartthings-multi-sensor-monoprice-4-in-1/256343/8 "2023-01-16T00:26:52Z")
Please give me the link? ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [January 16, 2023, 1:26am UTC](https://community.smartthings.com/t/what-edge-driver-for-smartthings-multi-sensor-monoprice-4-in-1/256343/9 "2023-01-16T01:26:04Z")
[https://bestow-regional.api.smartthings.com/invite/1PlYENKbdNle](https://bestow-regional.api.smartthings.com/invite/1PlYENKbdNle) ---
**Author:** ![joelw135](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/joelw135/32/70639_2.png) [@joelw135](https://community.smartthings.com/u/joelw135)\ **Post date:** [January 16, 2023, 3:54pm UTC](https://community.smartthings.com/t/what-edge-driver-for-smartthings-multi-sensor-monoprice-4-in-1/256343/10 "2023-01-16T15:54:45Z")
I installed the driver Z-Wave sensor (PH) but it hasn’t shown the temp or humidity or battery. How do I get it to update, or did I pick the wrong driver? ---
**Author:** ![Paul\_Oliver](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/paul_oliver/32/195152_2.png) [@Paul\_Oliver](https://community.smartthings.com/u/Paul_Oliver)\ **Post date:** [January 16, 2023, 3:56pm UTC](https://community.smartthings.com/t/what-edge-driver-for-smartthings-multi-sensor-monoprice-4-in-1/256343/11 "2023-01-16T15:56:49Z")
When conditions change they should update. Put it in the freezer to force some changes. Battery some times takes 12 Hrs. to update.