I am moving from My Vera Edge with 3 Wink Hubs to a SmartThing V2, and it has been an interesting adventure. Adding the SmartThing into the existing Z-wave network was a snap, but I found I had issues with trying to get updates to the new SmartThings hub. So after talking with my co-workers I sta…

[image] stargazer7: 3 Enerwave ZWN-BPC Z-wave motion sensors. So I thought maybe there is something wrong with the lock, let me try and add these to my network… No luck!!! I can not add them either… [image] Enerwave ZWN-BPC Z-wave Ceiling Mounted, Battery Powered PIR Sensor …

Smartthings can function as a secondary zwave controller to another primary, which is what you had set up originally. However, it does not support controller shift. So when you removed the vera, you removed the primary controller. The smartthings Zwave controller inside the hub is continuing to pe…

It looks like the primary controller shift didn’t go through. (If you haven’t rebooted the hub since the shift, do that to make extra sure that data is up to date.) I think you should be able to get it to work, though JDRoberts is right that we don’t officially support controller shift and currently…

It just brought up the vera edge, and it was node 1, It looks like one of my wink hubs is 0F (15) and I am going to try and bring it online, and perform the shift. I will update everyone I am done.

It looks like after a lot of button mashing I was able to have the Wink Hub to release the master controller, and my smart hub v2 is in control, I am now able to add the motion sensors, tomorrow, I will pull the lock apart and try to re-sync it. Here is the current controller state on the api websi…

@sidjohn1 , I was able to get Enerwave ZWN-BPC Z-wave Ceiling Mounted, Battery Powered PIR Sensor to connect I will let you know how it works out over the next few days.

The Kwikset 910 Z-Wave is now working correctly with one small exception, it is not reporting back its battery levels, but that is a different issue. @JDRoberts , and @duncan Thank you for your help!

I have the Lock and Front light working, but I am still fighting with the Motion Sensors… They are reporting back the battery status, but nothing about motion :frowning: It is almost like they don’t know to send the motion status. Does anyone know how I can set values or ping them via z-wave?

Vera Edge with Wink Hubs to SmartThings V2 Only - Zwave Issues

Devices & Integrations Connected Things

sidjohn1 (sidjohn1) October 27, 2015, 3:21am 2

Topic		Replies	Views
Moving from VeraLite to SmartThings help Connected Things	9	5496	October 17, 2016
Smart Things as secondary Zwave controller Devices & Integrations	29	18229	April 14, 2021
Mi Casa Verde Vera Lite as a Primary Controller, ST as a secondary Connected Things	34	9341	January 15, 2017
ST Secondaty Hub Devices & Integrations	2	771	January 14, 2017
Promote/Demote Z-wave Primary/Secondary? Devices & Integrations	16	4290	January 31, 2018

Vera Edge with Wink Hubs to SmartThings V2 Only - Zwave Issues

Related topics