# Trust Zigbee Bulb

**URL:** <https://community.smartthings.com/t/trust-zigbee-bulb/125102>\
**Category:** Devices & Integrations\
**Created:** [April 24, 2018, 6:18pm UTC](https://community.smartthings.com/t/trust-zigbee-bulb/125102 "2018-04-24T18:18:16Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![purp](https://avatars.discourse-cdn.com/v4/letter/p/f07891/32.png) [@purp](https://community.smartthings.com/u/purp)\
**Post date:** [April 24, 2018, 6:18pm UTC](https://community.smartthings.com/t/trust-zigbee-bulb/125102/1 "2018-04-24T18:18:16Z")

</div>

Hi,

Has anybody tried to use trust zigbee led bulbs and got them to work?

[https://www.trust.com/en/zigbee](https://www.trust.com/en/zigbee)

---

<div class="post-metadata">

**Author:** ![Automated\_House](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/automated_house/32/99641_2.png) [@Automated\_House](https://community.smartthings.com/u/Automated_House)\
**Post date:** [April 24, 2018, 8:47pm UTC](https://community.smartthings.com/t/trust-zigbee-bulb/125102/2 "2018-04-24T20:47:12Z")

</div>

the pics in the site have the zigbee alliance logo, but doesn’t say if they use ZHA or ZLL. Have you checked the zigbee alliance website to see if they’re listed?

---

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [April 24, 2018, 9:26pm UTC](https://community.smartthings.com/t/trust-zigbee-bulb/125102/3 "2018-04-24T21:26:17Z")

</div>

> [@purp](#):
>
> Hi,
> 
> Has anybody tried to use trust zigbee led bulbs and got them to work?
> 
> [Trust.com - Contact & Support - Installation of ZigBee products](https://www.trust.com/en/zigbee)

It says the bulbs will work with the hue bridge, so they would have to be either ZLL or Zigbee 3.0.

In either case, if you have them connected to Hue bridge, you should be able to use them from smartthings that way.

If you want to connect them directly to the smartthings hub without the hue bridge, it will probably work if they are ZLL, and probably won’t work if they are zigbee 3.0

> [@FAQ: Zigbee Application Profiles, or why not all zigbee devices work with SmartThings](https://community.smartthings.com/t/faq-zigbee-application-profiles-or-why-not-all-zigbee-devices-work-with-smartthings/76219):
>
> Zigbee is always zigbee, but the standard allows for different "profiles,"including manufacturer proprietary ones. [image] These are not all able to communicate with each other, they don’t even use the same addressing schemes. SmartThings uses the Zigbee Home Automation profile (ZHA 1.2) and part of the Zigbee 3.0 profile. Devices using other zigbee profiles may be able to join to the network, but their communications may not be understood, or they may frequently drop off because they don’t receive a handshake message they are expecting. There a lot of different ways to explain this, but I think one of the easiest is to think of zigbee as a post office and the different profiles as different languages. The outside envelope for different messages may look similar, have a specific format…

---

<div class="post-metadata">

**Author:** ![purp](https://avatars.discourse-cdn.com/v4/letter/p/f07891/32.png) [@purp](https://community.smartthings.com/u/purp)\
**Post date:** [April 25, 2018, 6:32pm UTC](https://community.smartthings.com/t/trust-zigbee-bulb/125102/4 "2018-04-25T18:32:32Z")

</div>

I bought one just for fun and it paired but was not recognised so I switched the device type to ZLL Dimmer Bulb and now it works 🙂.
