# Switchbot - Simple “power on” for some TVs (IR blaster)

**URL:** <https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557>\
**Category:** Connected Things\
**Tags:** project\_av, project\_voice, project\_remotes\
**Created:** [December 25, 2019, 12:28am UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557 "2019-12-25T00:28:05Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [December 25, 2019, 12:28am UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/1 "2019-12-25T00:28:05Z")

</div>

Woo hoo!

I got a cheap 32” fire TV At Black Friday. It doesn’t have as many voice commands as the fire TV cube, but I just wanted an additional TV for our guestroom. The TV is fine, the voice commands work fine, but… **There’s no way to turn it on or off just by voice or turn it on/off with an automation.** So it’s a lot like the very expensive Samsung smart televisions that way.

> **[Amazon.com: Toshiba 32LF221U19 32-inch Smart HD TV - Fire TV Edition:...](https://www.amazon.com/Toshiba-32LF221U19-32-inch-720p-Smart/dp/B07FPR6FMJ/)**
>
> Amazon.com: Toshiba 32LF221U19 32-inch Smart HD TV - Fire TV Edition: Electronics

I knew it could be done by adding a Harmony, but I didn’t want to spend that much money and it seems like overkill since once the TV was on I was going to do everything by voice with the fire TV options. I just needed a way to turn it on by voice.

As it happened… I already had a SwitchBot “hub plus” which is used to control “robot finger“ actuators in other parts of the house. So I was thinking about just getting another actuator and adding it to the manual button on the TV.

But then I realized that the Switchbot hub plus model has an IR blaster built into it so I decided to try that.

(One of the reasons I like SwitchBot is that it already has integrations with echo, Google home, Ifttt, and as of November 2019, smartthings.)

So I tried it, and it works great! 🎉 No special coding, no custom code, no “man in the middle server.” Just add the TV to the SwitchBot app, add the SwitchBot integration in the new V3 smartthings app, create a toggle scene in the Switchbot app, have Alexa discover the scene, and I’m all set.

Totally hands-free voice control through echo to turn the TV on and then use my fire TV commands. 📺

Plus the option to do other smartthings integrations if I choose. The integration for this particular model for any other TV commands would be fairly clunky because it’s at the button push level, but it could be done. For a television which has a better integration, like the Samsung models, this should solve the problem of “I can do everything except turn the TV on!” problem. 🕶

And again, to do this you don’t actually need one of the button pusher devices, you just need the cloud hub, which lists for $49 on Amazon, or the micro hub which lists for $39 (but you will have to supply your own power cord).

> **[Amazon.com: SwitchBot Hub Mini Smart Remote - IR Blaster, Link SwitchBot to...](https://www.amazon.com/SwitchBot-Mini-Smart-Remote-Acondicionado/dp/B07TTH5TMW/)**
>
> Amazon.com: SwitchBot Hub Mini Smart Remote - IR Blaster, Link SwitchBot to Wi-Fi, Control Air Conditioner, Compatible with Alexa, Google Home, HomePod, IFTTT: Home Audio & Theater

Available in multiple countries, including Japan and the UK:

> **[SwitchBot Hub Plus, Smart IR Remote Control for Air: Amazon.co.uk: Electronics](https://www.amazon.co.uk/SwitchBot-universal-controlled-auto-learning-compatible/dp/B07F2WYPY1/)**
>
> SwitchBot Hub Plus, Smart IR Remote Control for Air: Amazon.co.uk: Electronics

And here’s what the device page looks like in the new V3 smartthings app:

 ![image](https://global.discourse-cdn.com/smartthings/original/3X/e/e/eebbc6ad5d4e51128e43b6a950d833cc14ddd72f.png)

And here’s the SwitchBot app, which has its own simple rules:

 ![image](https://global.discourse-cdn.com/smartthings/original/3X/a/7/a7fe46b1dd44ad0367c48a23aba09775d2562b2e.jpeg)

_Thanks to @johnconstantelo , Who pointed out below that the newest model of the SwitchBot hub is smaller and sells for $10 less, although you have to provide your own power cord. As I mentioned, I’ve had mine for a while, and it’s the $49 model that has a nightlight built in and comes with a power cord. IR functionality is the same in both._

---

<div class="post-metadata">

**Author:** ![johnconstantelo](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/johnconstantelo/32/111869_2.png) [@johnconstantelo](https://community.smartthings.com/u/johnconstantelo)\
**Post date:** [December 25, 2019, 1:33am UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/2 "2019-12-25T01:33:32Z")

</div>

Very cool @JDRoberts. That page says this is newer?

> **[Amazon.com: SwitchBot Hub Mini Smart Remote - IR blaster, Link SwitchBot to...](https://www.amazon.com/SwitchBot-Hub-Mini-Smart-Remote/dp/B07TTH5TMW/ref=dp_ob_title_home)**
>
> Buy SwitchBot Hub Mini Smart Remote - IR blaster, Link SwitchBot to Wi-Fi, Control Air Conditioner, Compatible with Alexa Google Home Siri IFTTT: Accessories - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

Any idea what’s different or better?

Anyway, last post for me. Merry Christmas!

---

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [December 25, 2019, 1:55am UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/3 "2019-12-25T01:55:11Z")

</div>

> [@johnconstantelo](#):
>
> Any idea what’s different or better?

Yes, that’s a newer model than the one I already had.

Pros:

Smaller, $10 cheaper,

Cons:

you’ll have to buy a power cable so it may end up costing about the same.

No nightlight. Some people will be just fine with that, some might even prefer it. We do use it as a night light at our house…

From the manufacturer:

> Hub Mini requires a 5V 1A USB adapter or an equivalent power source

> The performance is the same as the Hub Plus, not compromised because of its compact size.SwitchBot Hub Mini is now micro-USB powered because the rainbow light is eliminated. It is smaller, square and white, which makes it blend more into the environment.

---

<div class="post-metadata">

**Author:** ![mebejedi](https://avatars.discourse-cdn.com/v4/letter/m/bb73d2/32.png) [@mebejedi](https://community.smartthings.com/u/mebejedi)\
**Post date:** [December 27, 2019, 3:01am UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/4 "2019-12-27T03:01:44Z")

</div>

I’ve seen the Harmony Hub go for as little as $50-60 bucks at Walmart.

---

<div class="post-metadata">

**Author:** ![Bry](https://avatars.discourse-cdn.com/v4/letter/b/aeb1de/32.png) [@Bry](https://community.smartthings.com/u/Bry)\
**Post date:** [January 7, 2020, 6:25pm UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/5 "2020-01-07T18:25:34Z")

</div>

Props to @JDRoberts regarding the Switchbot Mini. I had been looking for a cheap IR blaster to turn on my cable box and TV via Alexa. This nailed it!

---

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [January 7, 2020, 6:36pm UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/6 "2020-01-07T18:36:46Z")

</div>

Yeah, after I got the one set up for the new guestroom TV, my roommate liked it so much he got the Switchbot mini for the TV in his room, same issue. It’s a smart TV but there was no way to turn it on with Alexa.

---

<div class="post-metadata">

**Author:** ![Ryan780](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/ryan780/32/103505_2.png) [@Ryan780](https://community.smartthings.com/u/Ryan780)\
**Post date:** [January 8, 2020, 4:14pm UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/7 "2020-01-08T16:14:21Z")

</div>

There’s also the ST\_Anything IR library. If you’re a fan of Arduinos or the ESP8266, this is a very good implementation. I use it in two rooms of my house.

> [@\[RELEASE\] Infrared IR Device Integration via ST Anything v1.0](https://community.smartthings.com/t/release-infrared-ir-device-integration-via-st-anything-v1-0/135683):
>
> Hello All, I would like to share a new library I have created to integrate an IR controlled device with SmartThings through the ST Anything project. This project uses a NodeMCU together with an IR transmitter to control devices such as televisions and stereos etc. The interface is implemented as a an On/Off toggle switch, the typical use case would be to switch on and off a TV as part of a security system, or to turn on your music in the morning to wake you. Of course this button can go out of sync if you also use the physical IR remote to turn the device on and off. Please see the Github readme file for details of how to use the library: This project builds on the ST Anything project, and connects to SmartThings via WiFi: It also relies on the IRremoteESP8266 library that can be …

---

<div class="post-metadata">

**Author:** ![granzy](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/granzy/32/115386_2.png) [@granzy](https://community.smartthings.com/u/granzy)\
**Post date:** [April 25, 2020, 9:13pm UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/8 "2020-04-25T21:13:19Z")

</div>

connecting my Switchbot with Smartthing, I can see the Devices Switchbot created in smartthings, but I can only turn them on and off with the IR blaster.  
Has anyone gotten any further control through smartthings, like, Volume or input with Switchbot IR?

---

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [April 25, 2020, 10:38pm UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/9 "2020-04-25T22:38:47Z")

</div>

> [@granzy](#):
>
> connecting my Switchbot with Smartthing, I can see the Devices Switchbot created in smartthings, but I can only turn them on and off with the IR blaster.  
> Has anyone gotten any further control through smartthings, like, Volume or input with Switchbot IR?

You can get more controls through Alexa, which gives you two choices.

1. Create a scene in the SwitchBot app. You can then activate that scene either through Ifttt or through an Alexa routine (not a smartthings routine)

2. set up two Alexa devices and have one speak commands to the other. This may allow you to access some commands that are not available in the scenes. It sounds goofy, but it does work.

> **[Commands for controlling IR appliances with Alexa](https://support.switch-bot.com/hc/en-us/articles/360039685774-Commands-for-controlling-IR-appliances-with-Alexa)**
>
> After connecting your SwitchBot account to Alexa, you could control the IR appliances that you had already added to SwitchBot Hub Plus/Mini, with a voice command. 
> Before using voice control:
> 
> How ...

So just depends on what you’re trying to do.

In my case, as I explained in the first post in this thread, all I needed was on/off with voice control, so I haven’t really explored the other options available.

---

<div class="post-metadata">

**Author:** ![granzy](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/granzy/32/115386_2.png) [@granzy](https://community.smartthings.com/u/granzy)\
**Post date:** [April 26, 2020, 1:47pm UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/10 "2020-04-26T13:47:36Z")

</div>

How to add controls in Switchbot to be used by smartthings **other than ON/OFF**.  
So thanks to @JDRoberts I got this figured out.

Starting in the Switchbot app, under your hub, click “Add Appliance”  
 ![image](https://global.discourse-cdn.com/smartthings/original/3X/b/7/b7efeed4196c507d57697243594cf8abd6516ba8.png)  
Select a random item from the list (I choose Fan) and add it.  
**Note: Do not use “Others”. It would not show up in smartthings for me.**

 ![image](https://global.discourse-cdn.com/smartthings/original/3X/3/4/34a8ecc95db6b09935505fcfb97316e52ce46711.png)  
Go back into the newly added Appliance and select EDIT at the top. Re-Learn the Power button to any button of your choice.  
 ![image](https://global.discourse-cdn.com/smartthings/original/3X/9/2/92f8c9bcde432f6b2839de1e093695dfcfb6c6ed.png)  
Click the checkbox and you are done.

Let me know if there are questions or if anyone figues a better way to do this.

EDIT: you need to go back into the smartthings app and add device by brand and re-add the Switchbot (dont delete)

---

<div class="post-metadata">

**Author:** ![KittKat5](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/kittkat5/32/114939_2.png) [@KittKat5](https://community.smartthings.com/u/KittKat5)\
**Post date:** [May 24, 2020, 3:17am UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/11 "2020-05-24T03:17:06Z")

</div>

Can you post a screen shot of how it looks in smartthings?

---

<div class="post-metadata">

**Author:** ![granzy](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/granzy/32/115386_2.png) [@granzy](https://community.smartthings.com/u/granzy)\
**Post date:** [May 24, 2020, 3:26am UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/12 "2020-05-24T03:26:43Z")

</div>

Looks like any other on off switch

---

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [May 24, 2020, 3:56am UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/13 "2020-05-24T03:56:57Z")

</div>

![image](https://global.discourse-cdn.com/smartthings/original/3X/3/0/300fe9aced044ed3b533aa79829ff9833f574cfe.png)

---

<div class="post-metadata">

**Author:** ![granzy](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/granzy/32/115386_2.png) [@granzy](https://community.smartthings.com/u/granzy)\
**Post date:** [May 24, 2020, 5:42pm UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/14 "2020-05-24T17:42:08Z")

</div>

Also, if you have Action tiles, you can use the method above to create a custom remote for any device.

 ![Screenshot_20200524-133941](https://global.discourse-cdn.com/smartthings/original/3X/6/1/617c0b9ebc98a16b75c7d048fde43275b7fb6d03.png)

---

<div class="post-metadata">

**Author:** ![Diegocampy](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/diegocampy/32/118930_2.png) [@Diegocampy](https://community.smartthings.com/u/Diegocampy)\
**Post date:** [June 6, 2020, 10:42pm UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/15 "2020-06-06T22:42:32Z")

</div>

I have a big problem with my device TV and Amplifier emulated in smartthings by SwitchBot. The button for ON is te same of the button for OFF. In the app SwitchBot I have 2 separate button for OFF and ON. Can I use this in smartthings? 🤔 If I have the TV off, and I ask turn off the TV with my voice… My TV understands correctly and nothing happens becouse I make a routine in google home, that if I ask turn off TV, google turn off with the button OFF and if is already OFF, with the press an other time Off, TV not change status. But if I make a routine in smartthings that turn off the TV already off, it wake up On! 😒 Because the routine use the button “on/off”. Can I change this situation ? Many thanks for your help

---

<div class="post-metadata">

**Author:** ![JDRoberts](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jdroberts/32/56577_2.png) [@JDRoberts](https://community.smartthings.com/u/JDRoberts)\
**Post date:** [June 6, 2020, 11:27pm UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/16 "2020-06-06T23:27:58Z")

</div>

I’m sorry, I rely on text to speech, and I can’t understand your post. Hopefully someone else can help.

---

<div class="post-metadata">

**Author:** ![Diegocampy](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/diegocampy/32/118930_2.png) [@Diegocampy](https://community.smartthings.com/u/Diegocampy)\
**Post date:** [June 7, 2020, 8:05am UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/17 "2020-06-07T08:05:14Z")

</div>

Sorry JD. I’m Italian 🇮🇹 and my English is very bad. Now with Google traslatore I have try to correct my past message. Please try to reload and tell me is now is Understandable

---

<div class="post-metadata">

**Author:** ![Diegocampy](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/diegocampy/32/118930_2.png) [@Diegocampy](https://community.smartthings.com/u/Diegocampy)\
**Post date:** [June 7, 2020, 12:00pm UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/19 "2020-06-07T12:00:34Z")

</div>

I add a custom projector (have 2 different button to power on or off),

 ![Screenshot_20200607-135818](https://global.discourse-cdn.com/smartthings/original/3X/9/1/915c6a1203493aa83cc1adcebe199f60fed66713.jpeg) and now smartthings create a device with only on button on/off visible, but in real the button is two different ON and Off. ![Screenshot_20200607-135803](https://global.discourse-cdn.com/smartthings/original/3X/4/4/4424614cc04ea3e6ad02de8ec525e981fa930814.jpeg)  
With this, now in smartthings and in google home I can use this. Fantastic for automation in smartthings and for sólve the problem di power off TV when this is on and I ask power On with voice.  
Many thanks for your help @JDRoberts and @granzy.

---

<div class="post-metadata">

**Author:** ![djh\_wolf](https://avatars.discourse-cdn.com/v4/letter/d/ad7895/32.png) [@djh\_wolf](https://community.smartthings.com/u/djh_wolf)\
**Post date:** [June 19, 2020, 4:55am UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/20 "2020-06-19T04:55:45Z")

</div>

@granzy

Now this looks interesting. Mind elaborating a little please? I love actiontiles. At the moment it’s a cumbersome webcore ‘url link’ and/or a virtual push button switch approach. Not the best for multiple buttons.

---

<div class="post-metadata">

**Author:** ![granzy](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/granzy/32/115386_2.png) [@granzy](https://community.smartthings.com/u/granzy)\
**Post date:** [June 19, 2020, 10:55am UTC](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557/21 "2020-06-19T10:55:35Z")

</div>

@djh_wolf The Switchbot hub control through Actiontiles can be a bit slow due to it not being locally executed, but it is fast enough for me.  
I placed my switchbot mini hub under my TV to control on/off, and then have a simple USB powered IR extender that sits next to the switchbot hub that relays any command down to the basement theater rack.  
My TV is only connected to a PC so I only need it on/off. The IR extender controls my Receiver power, volume and input.  
As you can see from my post 14 above, I have added created an actiontile panel for TV watching.

EDIT: If you are interested in controlling smartthings devices from a PC or the other way around, search eventghost. [http://www.eventghost.net/](http://www.eventghost.net/)

> [@\[OBSOLETE\] Send Events to EventGhost](https://community.smartthings.com/t/send-events-to-eventghost/22473):
>
> [EventGhost](http://www.eventghost.org/) is an open source tool for Windows automation that has been in use by HA and HTPC folks for well over a decade. EventGhost allows the user to take actions in response to events triggered by various programs and devices in your environment. EventGhost can be used as a general rule engine, scheduler, or device handler that is run locally and as such isn’t dependent upon the ST cloud. Programming actions in response to events is done through a simple drag-and-drop interface that is reliable and easy to use. This SmartApp allows you to send events from SmartThings to an EventGhost server running the [Webserver](http://www.eventghost.org/mediawiki/index.php?title=Webserver) plugin. The result is that events from your SmartThings switches, dimmers, motion sensors, etc can now trigger actions in EventGhost. Version 1.0.0 - 2015-09-13 - Initia…

I use it to create keyboard shortcuts to control the PC as well as Smartthing devices, like lighting, and even the switchbot hub.

[Next page](https://community.smartthings.com/t/switchbot-simple-power-on-for-some-tvs-ir-blaster/181557.md?page=2)
