# \[ST Edge\] Personal Tuya Devices - Generic EF00 Device **URL:** \ **Category:** Community Created Drivers\ **Tags:** edge\_lighting, edge\_sensors\ **Created:** [January 3, 2023, 3:30am UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270 "2023-01-03T03:30:22Z")\ **Posts on this page:** 20\ **Page:** 55
**Author:** ![Jake\_Borg](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jake_borg/32/186946_2.png) [@Jake\_Borg](https://community.smartthings.com/u/Jake_Borg)\ **Post date:** [April 23, 2025, 9:51am UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1110 "2025-04-23T09:51:08Z")
Hey all, I have this presence sensor with illuminance sensor, does anyone have like it? I cannot manage to set the driver as presence and + illuminance from settings. ![Screenshot_20250423_112553_SmartThings](https://global.discourse-cdn.com/smartthings/original/3X/f/c/fcb9d257573d23ce9fd67d6d28d4ab9b1d521e85.jpeg) ![Screenshot_20250423_113742_Amazon Shopping](https://global.discourse-cdn.com/smartthings/original/3X/7/d/7d99eba8f49005f70c3efa8f6de20bcae52f3cde.jpeg) ![Screenshot_20250423_115102_SmartThings](https://global.discourse-cdn.com/smartthings/original/3X/1/f/1fcf5e66464850a5e9f6fd3cd7f0f869b07f0310.jpeg) ---
**Author:** ![marcos.scheffler](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/marcos.scheffler/32/207519_2.png) [@marcos.scheffler](https://community.smartthings.com/u/marcos.scheffler)\ **Post date:** [April 23, 2025, 12:44pm UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1111 "2025-04-23T12:44:18Z")
> [@](#): > > The issue I am having is that both the battery, and the humidity appear to be out by a factor of 10 See if you have a “rate” option in the configuration of the devices created for humidity and battery ---
**Author:** ![dotan\_shai](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/dotan_shai/32/167152_2.png) [@dotan\_shai](https://community.smartthings.com/u/dotan_shai)\ **Post date:** [April 24, 2025, 2:56am UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1112 "2025-04-24T02:56:35Z")
For TZ321C\_fkzihax8, these are the DP involved: ```auto [101, 'entry_sensitivity', tuya.valueConverter.raw], [102, 'entry_distance', tuya.valueConverter.divideBy100], [103, 'departure_delay', tuya.valueConverter.raw], [104, 'entry_filter_time', tuya.valueConverter.divideBy100], [105, 'block_time', tuya.valueConverter.divideBy10], [107, 'illuminance', tuya.valueConverter.divideBy10], [108, 'debug_mode', tuya.valueConverterBasic.lookup({OFF: tuya.enum(0), ON: tuya.enum(1)})], [109, 'debug_distance', tuya.valueConverter.divideBy100], [110, 'debug_countdown', tuya.valueConverter.raw], [ 111, 'scene_preset', tuya.valueConverterBasic.lookup({ Custom: tuya.enum(0), Toilet: tuya.enum(1), Kitchen: tuya.enum(2), Hallway: tuya.enum(3), Bedroom: tuya.enum(4), Livingroom: tuya.enum(5), Meetingroom: tuya.enum(6), Default: tuya.enum(7), }), ], [ 112, 'sensor', tuya.valueConverterBasic.lookup({ on: tuya.enum(0), occupied: tuya.enum(1), unoccupied: tuya.enum(2), }), ], [113, 'cline', tuya.valueConverter.raw], [114, 'status_indication', tuya.valueConverterBasic.lookup({OFF: tuya.enum(0), ON: tuya.enum(1)})], [115, 'radar_sensitivity', tuya.valueConverter.raw], [116, 'shield_range', tuya.valueConverter.divideBy100], [117, 'detection_range', tuya.valueConverter.divideBy100], [118, 'equipment_status', tuya.valueConverter.raw], [119, 'target_distance', tuya.valueConverter.divideBy100], [120, 'distance_report_mode', tuya.valueConverterBasic.lookup({Normal: tuya.enum(0), 'Occupancy detection': tuya.enum(1)})], ], ``` I hope this can help you to configure your device setting. ---
**Author:** ![Jake\_Borg](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jake_borg/32/186946_2.png) [@Jake\_Borg](https://community.smartthings.com/u/Jake_Borg)\ **Post date:** [April 25, 2025, 9:25am UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1113 "2025-04-25T09:25:03Z")
Thanks for your reply, I tried updating the Datapoints but it’s still not working. I am using 112 for presence detection and 107 for illuminance. ---
**Author:** ![dotan\_shai](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/dotan_shai/32/167152_2.png) [@dotan\_shai](https://community.smartthings.com/u/dotan_shai)\ **Post date:** [April 25, 2025, 11:04am UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1114 "2025-04-25T11:04:25Z")
Try to create a LOG with CLI. You will some info that might be useful. While creating the log change the illumination and presence. Here are some instructions: > [@Edge Driver or Device Handeler for a TUYA (Zemismart) Zigbee plug with energy mesurment capabilities](https://community.smartthings.com/t/edge-driver-or-device-handeler-for-a-tuya-zemismart-zigbee-plug-with-energy-mesurment-capabilities/245383/18): > > Install CLI on your computer: • You have to download from this link lastet release of the compressed file smartthings-win.zip, if you use windows or the one necessary for your operating system • In that link you also have installation help, use and all the commands you can use [smartthings-cli/packages/cli at master · SmartThingsCommunity/smartthings-cli - smartthings edge:channels:update [ID] ](https://github.com/SmartThingsCommunity/smartthings-cli/tree/master/packages/cli#smartthings-edgechannelsupdate-id) • Unzip it and move the smartthings.exe file to a folder on your computer from where it will be used. for example to a new folder in documents/CLI • You have to open the windows powerShell terminal window and you have to go to the directory (folder) where the smarttings.exe file is. • Use the DOS commands “cd…” to move down directory and “cd directory name” to move to that directory. This is a… ---
**Author:** ![Jonposttib](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jonposttib/32/145818_2.png) [@Jonposttib](https://community.smartthings.com/u/Jonposttib)\ **Post date:** [April 26, 2025, 7:33am UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1115 "2025-04-26T07:33:06Z")
![20250426_102859](https://global.discourse-cdn.com/smartthings/original/3X/7/6/76a3b677d7674db554aa4a30a0c3911996c292ba.jpeg) ![Screenshot_20250426_102508_SmartThings](https://global.discourse-cdn.com/smartthings/original/3X/4/9/494202ae1849c48175b71667eb3b48620ee70914.jpeg) ![Screenshot_20250426_102229_SmartThings](https://global.discourse-cdn.com/smartthings/original/3X/4/d/4d2bd27b5cbba5f09390ceeeb68383eb291863b5.jpeg) Hi, I am using these nice zigbee soil temperature and humidity meters already for some time. I use the personal tuya devices - main driver. Everything was okay until last Thursday. In the history I noticed something changed (see picture 3) in the morning and since that time temperature is way off with measure over 220°C. It happened at the same time with all these meters. What to do? ---
**Author:** ![dotan\_shai](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/dotan_shai/32/167152_2.png) [@dotan\_shai](https://community.smartthings.com/u/dotan_shai)\ **Post date:** [April 26, 2025, 6:45pm UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1116 "2025-04-26T18:45:53Z")
@Jonposttib, can you change the temperature rate (factor) in the device setting? @w35l3y, did you make a change in the driver? I know that you don’t have a hub. @nayelyz did you change something in the software or firmware that prevent rate function to work? ---
**Author:** ![Jonposttib](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jonposttib/32/145818_2.png) [@Jonposttib](https://community.smartthings.com/u/Jonposttib)\ **Post date:** [April 26, 2025, 8:20pm UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1117 "2025-04-26T20:20:24Z")
@w35l3y I didn’t change anything in the driver. And yes I use the aeotec hub. @dotan_shai no I think I can’t. Added a pic of the settings menu ![Screenshot_20250426_231823_SmartThings](https://global.discourse-cdn.com/smartthings/original/3X/0/0/00503f286eabcb68e0302836300bbfd5f1c44abc.jpeg) @nayelyz I didnt change anything in the software or firmware. Something happened on its own. ---
**Author:** ![w35l3y](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/w35l3y/32/109618_2.png) [@w35l3y](https://community.smartthings.com/u/w35l3y)\ **Post date:** [April 26, 2025, 11:06pm UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1118 "2025-04-26T23:06:45Z")
> [@Jonposttib](#): > > ![Screenshot_20250426_102508_SmartThings](https://global.discourse-cdn.com/smartthings/original/3X/4/9/494202ae1849c48175b71667eb3b48620ee70914.jpeg) It was modified for the last time in December 19th, 2023. ---
**Author:** ![dotan\_shai](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/dotan_shai/32/167152_2.png) [@dotan\_shai](https://community.smartthings.com/u/dotan_shai)\ **Post date:** [April 27, 2025, 2:40am UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1119 "2025-04-27T02:40:20Z")
This lead to something in ST Firmware or Software. @nayelyz can you please check in your side why Rate definition is no longer works ? ---
**Author:** ![w35l3y](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/w35l3y/32/109618_2.png) [@w35l3y](https://community.smartthings.com/u/w35l3y)\ **Post date:** [April 27, 2025, 9:19am UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1120 "2025-04-27T09:19:54Z")
> [@Jonposttib](#): > > ![Screenshot_20250426_231823_SmartThings](https://global.discourse-cdn.com/smartthings/original/3X/0/0/00503f286eabcb68e0302836300bbfd5f1c44abc.jpeg) Rate is related to the manufacturer chosen. As it is defined as “Auto”, try forcing a different one other than `_TZE200_myd45weu`. ---
**Author:** ![nayelyz](https://avatars.discourse-cdn.com/v4/letter/n/59ef9b/32.png) [@nayelyz](https://community.smartthings.com/u/nayelyz)\ **Post date:** [April 28, 2025, 6:15pm UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1121 "2025-04-28T18:15:51Z")
Hi, @w35l3y Which is the thing that isn’t working? As you’re the developer, I need more details on how the “Rate” works on the backend to see what could be causing the issue, please 😃 ---
**Author:** ![w35l3y](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/w35l3y/32/109618_2.png) [@w35l3y](https://community.smartthings.com/u/w35l3y)\ **Post date:** [April 28, 2025, 8:35pm UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1122 "2025-04-28T20:35:42Z")
> > It is selected based on the manufacturer chosen in the settings. Different manufacturers use different rates to represent floating numbers. ~~I don’t remember exactly how the driver handle when manufacturer “Auto” is selected, but I carefully will read the code and explain later today.~~ When manufacturer “Auto” is selected in the settings, the driver uses the models loaded in cache to determine which one to use as similar device. > Basically, it loops through the models loaded in cache and returns the first model found that matches the condition. Probably, the device was working based on the situation of the cache at that moment. Then, the cache was cleaned for some reason (hub restart maybe?) and then the cache was loaded in a different order the second time. To make sure, we would need to know what model the driver was expecting/simulating the first time. My best advice would be to avoid using manufacturer “Auto” and select an option whenever possible. When a different manufacturer is selected, it is loaded in the cache. That is the reason why I asked him to select a different manufacturer. ---
**Author:** ![Jonposttib](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jonposttib/32/145818_2.png) [@Jonposttib](https://community.smartthings.com/u/Jonposttib)\ **Post date:** [April 30, 2025, 3:30am UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1123 "2025-04-30T03:30:23Z")
I tried changing manufacters, but that doesn’t help. ---
**Author:** ![w35l3y](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/w35l3y/32/109618_2.png) [@w35l3y](https://community.smartthings.com/u/w35l3y)\ **Post date:** [April 30, 2025, 6:57am UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1124 "2025-04-30T06:57:25Z")
The effect isn’t immediate. You probably didn’t give enough time to the device report a new temperature after changing the manufacturer. - \_TZE200\_locansqn - \_TZE200\_whkgqxse - \_TZE200\_znbl8dj5 Any of these manufacturers should work for your case. ---
**Author:** ![Jonposttib](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jonposttib/32/145818_2.png) [@Jonposttib](https://community.smartthings.com/u/Jonposttib)\ **Post date:** [April 30, 2025, 1:02pm UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1125 "2025-04-30T13:02:17Z")
You are totally right. It took some time. From the manufacturers in the list 3 worked. As shown in the pictures. ![SmartSelect_20250430_155920_SmartThings](https://global.discourse-cdn.com/smartthings/original/3X/7/5/75fef4e6639599df0024f9affd33e14b233c38c4.jpeg) ![SmartSelect_20250430_155900_SmartThings](https://global.discourse-cdn.com/smartthings/original/3X/e/5/e5bff710e94daca1a89759e9e22685f9963f3ee8.jpeg) ![SmartSelect_20250430_155840_SmartThings](https://global.discourse-cdn.com/smartthings/original/3X/5/a/5aa73410e779d5ecf0e61355094b0dbd684dbabb.jpeg) ---
**Author:** ![w35l3y](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/w35l3y/32/109618_2.png) [@w35l3y](https://community.smartthings.com/u/w35l3y)\ **Post date:** [April 30, 2025, 2:13pm UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1126 "2025-04-30T14:13:55Z")
All 3 options I informed should work for you, just give a couple of minutes to receive new report. I don’t recommend using the later 2 options you informed because they also change the rate of humidity and battery, respectively. ---
**Author:** ![Jonposttib](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/jonposttib/32/145818_2.png) [@Jonposttib](https://community.smartthings.com/u/Jonposttib)\ **Post date:** [April 30, 2025, 2:39pm UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1127 "2025-04-30T14:39:48Z")
Thanks for the help. Somehow \_TZE200\_yjjdcqsq (1\*, 2, 3\*) works. The other ones have an influence on the humidity. The DP for humidity is set to 3 and for temperature to 5 as Shai Dotan recommended in the past. ---
**Author:** ![dotan\_shai](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/dotan_shai/32/167152_2.png) [@dotan\_shai](https://community.smartthings.com/u/dotan_shai)\ **Post date:** [April 30, 2025, 8:09pm UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1128 "2025-04-30T20:09:08Z")
Can you please explain what this numbers and stars mean ? for example \_TZE200\_yjjdcqsq (1\*, 2, 3\*). Is it? 1, Temperature with star = **with** rate ? 2, Humidity not star = **Without** rate ? 3. Battery with star = **with** rate or another function ? what the 4 stands for ? For TZE284\_aao3yzhs , which is @Jonposttib device the DP are: > ``` > [3, 'soil_moisture', tuya.valueConverter.raw], > [5, 'temperature', tuya.valueConverter.divideBy10], > [9, 'temperature_unit', tuya.valueConverter.temperatureUnit], > [14, 'battery_state', tuya.valueConverter.batteryState], > [15, 'battery', tuya.valueConverterBasic.scale(6, 60, 0, 100)], > > ``` ---
**Author:** ![nayelyz](https://avatars.discourse-cdn.com/v4/letter/n/59ef9b/32.png) [@nayelyz](https://community.smartthings.com/u/nayelyz)\ **Post date:** [April 30, 2025, 9:15pm UTC](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270/1129 "2025-04-30T21:15:30Z")
> [@w35l3y](#): > > Probably, the device was working based on the situation of the cache at that moment. Then, the cache was cleaned for some reason (hub restart maybe?) and then the cache was loaded in a different order the second time. ok, then it was because the device needed an extra configuration, ok. In case it fails even though the preference is selected correctly **and** was working well before, we can start an investigation. Thank you for the context, @w35l3y [Previous page](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270.md?page=54) [Next page](https://community.smartthings.com/t/st-edge-personal-tuya-devices-generic-ef00-device/255270.md?page=56)