Also I will need the link to your driver channel
Ecosmart was already included in the initial version
I have added Sengled as profile switch and level.
The link is here
it will take about 12 hours to update
@Mariano_Colmenarejo with 1.1 driver change Ecosmart bulb’s details page now does not show level and temperature update. I have tried clearing cache restarting hub, but no change.
Bulb is On, but shows 0% for level and temperature.
I can turn bulb on and off, but there is no update even on that status, icon is just spinning, and eventually throws an error message.
Before this update everything was working
The operating code has not changed, I have only added the version information preferences and added the fingerprint of the sengled bulb.
I have tried it on mine before publishing it and well.
It will not have been updated yet, according to say they are 12 hours, 7 hours have passed, although the preferences seem to be seen before.
Let him see if he updates himself, so they can see if the procedure works or what problems he has.
If it is not fixed, delete the driver from the app and reinstall it. You will have to remove the device, remove the driver and reinstall driver and device
1 Like
My EcoSmart bulb linked to your driver is working fine.
1 Like
Will the version appear in settings, preferences?
Yes the version appears under settings. Version 1.1 (Sep 2021) “Added in Preferences: Version info & Sengled E11-G13”
1 Like
I added a Sengled E11-G13 bulb with your driver. It is a dimmable warm white bulb, with no adjustment for color temperature.
So far it works good with your driver. Since it is not color temperature adjustable NO adjustment slider appears in the app.
1 Like
Yes, the fingerprint is with the profile switch-level
I too can confirm the Sengled build is working as expected.
1 Like
Hello @nayelyz,
I have created the custom capacity and the presentation for colorTemperarue with limits 2700k to 5500k, according to the tutorial, except that the configuration file that creates the VID I have created it with the ID of the profile instead of the DTH.
I already have the presentation VID placed in the profile file as it is in the custom-capability example which is in the sampleDrivers folder.
metadata:
mnmn: SmartThingsCommunity
vid: "bdd33c60-0c36-3ffb-a5f3-0c277fa85230"
deviceType: Light
ocfDeviceType: oic.d.light
deviceTypeId: Light
The presentation does not change in the app.
Do I also have to put the custom capacity created in the profile file and manage it in lua.ini or is it valid with the custom VID presentation only?
I have also created the configuration file of the presentation in .yaml instead of .json, as in your example, but it doesn’t work either
I have rewritten the values 2700, 5500 in the configuration file of the presentation once created and it does not work either
What am I doing wrong?
Thanks
I put the log process of creating the cuatom-capability and the presentation files, in case you see something wrong
**Custom capability colorTemperature creation:**
PS C:\Users\Mariano\smartthings> .\smartthings capabilities:create
? Capability Name: Color Temperature
? Select an action... Add an attribute
? Attribute Name: colorTemperature
? Select an attribute type: integer
? Minimum value (default: no minimum): 2700
? Maximum value (default: no maximum): 5500
? Unit of measure (default: none):
? If you want to add a basic command, enter a command name now (or hit enter for none):
(Basic commands are simple commands that set the attribute to a specific value.)
? Select an action... Finish & Create
Capability: legendabsolute60149.colorTemperature
Attributes:
┌──────────────────┬─────────┬─────────────────────┐
├──────────────────┼─────────┼─────────────────────┤
│ colorTemperature │ integer │ setColorTemperature │
└──────────────────┴─────────┴─────────────────────┘
Commands:
┌─────────────────────┬────────────────┐
│ Name │ Arguments │
│ setColorTemperature │ value: integer │
└─────────────────────┴────────────────┘
PS C:\Users\Mariano\smartthings> .\smartthings capabilities:presentation:create legendabsolute60149.colorTemperature 1 -j -i=C:\Users\Mariano\Documents\Mariano\VSC\SampleDrivers\my-capabilities\colorTemperature.json
{
"dashboard": {
"states": [
{
"label": "{{colorTemperature.value}} {{colorTemperature.unit}}",
"alternatives": null
}
],
"actions": [],
"basicPlus": []
},
"detailView": [
{
"label": "Color Temperature",
"displayType": "slider",
"slider": {
"range": [
2700,
5500
],
"step": 1,
"unit": "colorTemperature.unit",
"command": "setColorTemperature",
"argumentType": "integer",
"value": "colorTemperature.value",
"valueType": "integer"
},
"state": null
}
],
"automation": {
"conditions": [
{
"label": "Color Temperature",
"displayType": "slider",
"slider": {
"range": [
2700,
5500
],
"step": 1,
"unit": "colorTemperature.unit",
"value": "colorTemperature.value",
"valueType": "integer"
}
}
],
"actions": [
{
"label": "Color Temperature",
"displayType": "slider",
"slider": {
"range": [
2700,
5500
],
"unit": "colorTemperature.unit",
"command": "setColorTemperature",
"argumentType": "integer"
}
]
},
"id": "legendabsolute60149.colorTemperature",
"version": 1
PS C:\Users\Mariano\smartthings>.\smartthings presentation:device-config:generate 115c0572-4d8e-3315-9d06-6d5a80513ba0 -o=deviceConfig.json -j
{
"dashboard": {
"states": [
{
"component": "main",
"capability": "switch",
"version": 1,
"idx": 0,
"group": "main",
"values": []
}
],
"actions": [
{
"component": "main",
"capability": "switch",
"version": 1,
"idx": 0,
"group": "main"
}
]
},
"detailView": [
{
"component": "main",
"capability": "switch",
"version": 1,
"values": [],
"patch": []
},
{
"component": "main",
"capability": "switchLevel",
"version": 1,
"values": [],
"patch": []
},
{
"component": "main",
"capability": "colorTemperature",
"version": 1,
"values": [],
"patch": []
},
{
"component": "main",
"capability": "refresh",
"version": 1,
"values": [],
"patch": []
}
],
"automation": {
"conditions": [
{
"component": "main",
"capability": "switch",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
},
{
"component": "main",
"capability": "switchLevel",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
},
{
"component": "main",
"capability": "colorTemperature",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
}
],
"actions": [
{
"component": "main",
"capability": "switch",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
},
{
"component": "main",
"capability": "switchLevel",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
},
{
"component": "main",
"capability": "colorTemperature",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
},
{
"component": "main",
"capability": "refresh",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
}
]
},
"type": "profile"
}
PS C:\Users\Mariano\smartthings>.\smartthings presentation:device-config:create -j -i deviceConfig.json
{
"mnmn": "SmartThingsCommunity",
"vid": "bdd33c60-0c36-3ffb-a5f3-0c277fa85230",
"version": "0.0.1",
"type": "profile",
"dashboard": {
"states": [
{
"component": "main",
"capability": "switch",
"version": 1,
"idx": 0,
"group": "main",
"values": []
}
],
"actions": [
{
"component": "main",
"capability": "switch",
"version": 1,
"idx": 0,
"group": "main"
}
]
},
"detailView": [
{
"component": "main",
"capability": "switch",
"version": 1,
"values": [],
"patch": []
},
{
"component": "main",
"capability": "switchLevel",
"version": 1,
"values": [],
"patch": []
},
{
"component": "main",
"capability": "colorTemperature",
"version": 1,
"values": [],
"patch": []
},
{
"component": "main",
"capability": "refresh",
"version": 1,
"values": [],
"patch": []
}
],
"automation": {
"conditions": [
{
"component": "main",
"capability": "switch",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
},
{
"component": "main",
"capability": "switchLevel",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
},
{
"component": "main",
"capability": "colorTemperature",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
}
],
"actions": [
{
"component": "main",
"capability": "switch",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
},
{
"component": "main",
"capability": "switchLevel",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
},
{
"component": "main",
"capability": "colorTemperature",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
},
{
"component": "main",
"capability": "refresh",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
}
]
},
"presentationId": "bdd33c60-0c36-3ffb-a5f3-0c277fa85230",
"manufacturerName": "SmartThingsCommunity"
}
Sorry for the confusion, you don’t have to create a custom capability. Using the standard colorTemperature, you can override its value range from the device presentation.
For this, you have to follow these steps:
- Create a device-config. I used the VID you shared to get the original device-config and changed it accordingly. This is how it should look like:
Open to see device-config
{
"type": "profile",
"dashboard": {
"states": [
{
"component": "main",
"capability": "switch",
"version": 1,
"group": "main",
"values": []
}
],
"actions": [
{
"component": "main",
"capability": "switch",
"version": 1,
"values": []
}
]
},
"detailView": [
{
"component": "main",
"capability": "switch",
"version": 1,
"values": [],
"patch": []
},
{
"component": "main",
"capability": "switchLevel",
"version": 1,
"values": [],
"patch": []
},
{
"component": "main",
"capability": "colorTemperature",
"version": 1,
"values": [
{
"key": "colorTemperature.value",
"range": [
2700,
5500
],
"step": 1
}
],
"patch": []
},
{
"component": "main",
"capability": "refresh",
"version": 1,
"values": [],
"patch": []
}
],
"automation": {
"conditions": [
{
"component": "main",
"capability": "switch",
"version": 1,
"values": [],
"patch": []
},
{
"component": "main",
"capability": "switchLevel",
"version": 1,
"values": [],
"patch": []
},
{
"component": "main",
"capability": "colorTemperature",
"version": 1,
"values": [
{
"key": "colorTemperature.value",
"range": [
2700,
5500
],
"step": 1
}
],
"patch": []
}
],
"actions": [
{
"component": "main",
"capability": "switch",
"version": 1,
"values": [],
"patch": []
},
{
"component": "main",
"capability": "switchLevel",
"version": 1,
"values": [],
"patch": []
},
{
"component": "main",
"capability": "colorTemperature",
"version": 1,
"values": [
{
"key": "colorTemperature.value",
"range": [
2700,
5500
],
"step": 1
}
],
"patch": []
},
{
"component": "main",
"capability": "refresh",
"version": 1,
"values": [],
"patch": []
}
]
}
}
Run the command smartthings presentation:device-config:create using the input above.
- Put the resulting VID in your driver’s profile metadata without
", eg:
metadata:
vid: 1491a1e5-b77e-3e8b-8fad-49ed566a5ca8
mnmn: SmartThingsCommunity
You might have to uninstall and install the device again to refresh the presentation. If you’re using an Android device, you can delete the app’s cache, just go to your mobile’s settings > apps > look for the ST app > storage > delete cache
I have created with @nayelyz help a presentation for colorTemperature between 2700k and 6000k, so that it can be used for most lights. Works in detail view and automations view.
@milandjurovic71, I am going to test it before publish it in the channel.
It seems a little slow in updating the color of the ends 2700 & 6000.
If you click on the default temperature icons, which are 3030k and 5681k, it goes fast.
It is necessary clear the app cache for the changes take effect or reinstall device. I don’t know if the automatic version is updated what will happen
Thanks @nayelyz
2 Likes
@nayelyz,
The custom presentation does not show values in the range from 2700k to 6000k in “automations” ,“actions” view.
It shows it correctly in “automations”, “conditions”
In vid created two view are equal.
I don’t know if anyone else noticed this
Can you share the VID, please?
{
"mnmn": "SmartThingsCommunity",
"vid": "caf5c1b2-3110-3a85-bd2b-a7437d361bae",
"version": "0.0.1",
"type": "profile",
"dashboard": {
"states": [
{
"component": "main",
"capability": "switch",
"version": 1,
"idx": 0,
"group": "main",
"values": []
}
],
"actions": [
{
"component": "main",
"capability": "switch",
"version": 1,
"idx": 0,
"group": "main"
}
]
},
"detailView": [
{
"component": "main",
"capability": "switch",
"version": 1,
"values": [],
"patch": []
},
{
"component": "main",
"capability": "switchLevel",
"version": 1,
"values": [],
"patch": []
},
{
"component": "main",
"capability": "colorTemperature",
"version": 1,
"values": [
{
"key": "colorTemperature.value",
"enabledValues": [],
"range": [
2700,
6000
],
"step": 1
}
],
"patch": []
},
{
"component": "main",
"capability": "refresh",
"version": 1,
"values": [],
"patch": []
}
],
"automation": {
"conditions": [
{
"component": "main",
"capability": "switch",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
},
{
"component": "main",
"capability": "switchLevel",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
},
{
"component": "main",
"capability": "colorTemperature",
"version": 1,
"values": [
{
"key": "colorTemperature.value",
"enabledValues": [],
"range": [
2700,
6000
],
"step": 1
}
],
"patch": [],
"exclusion": []
}
],
"actions": [
{
"component": "main",
"capability": "switch",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
},
{
"component": "main",
"capability": "switchLevel",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
},
{
"component": "main",
"capability": "colorTemperature",
"version": 1,
"values": [
{
"key": "colorTemperature.value",
"enabledValues": [],
"range": [
2700,
6000
],
"step": 1
}
],
"patch": [],
"exclusion": []
},
{
"component": "main",
"capability": "refresh",
"version": 1,
"values": [],
"patch": [],
"exclusion": []
}
]
},
"presentationId": "caf5c1b2-3110-3a85-bd2b-a7437d361bae",
"manufacturerName": "SmartThingsCommunity"
}
Yes, I have notified author of this driver, couple days ago. It goes from 1 to 30000K. I think that @Mariano_Colmenarejo is working on it.
@nayelyz is it possible to create one Edge driver with settings that can be changed by user to show correct Temperature range, as different manufacturers have different ranges
Originally driver was developed for Lidl bulbs, snd @Mariano_Colmenarejo kept adding support for other bulbs as someone will request, to device fingerprint profile. As much as I know currently following bulbs are supported:
-
Lidl Adjustable Color Temperature 2200-6500K
-
Ecosmart Light Bulb Tunable White 2700-6500K
-
Osram/Sylvania Lightify Tunable White 2700-6500K
-
Sengled Soft White 2700K
This are the ones that i could pick up from this tread. Maybe @Mariano_Colmenarejo can add more to this list.
1 Like
Hi @milandjurovic71 and all,
This driver was made with the default values from the edge smartfhings libraries. Only some lines of code need added to create driver. This is the driver code:
----- load defaul libraries
local capabilities = require "st.capabilities"
local ZigbeeDriver = require "st.zigbee"
local defaults = require "st.zigbee.defaults"
local zcl_clusters = require "st.zigbee.zcl.clusters"
------ driver template definition
local zigbee_bulb_driver_template = {
supported_capabilities = {
capabilities.switch,
capabilities.switchLevel,
capabilities.colorTemperature,
capabilities.refresh
},
lifecycle_handlers = {
},
}
-- run driver
defaults.register_for_default_handlers(zigbee_bulb_driver_template, zigbee_bulb_driver_template.supported_capabilities)
local zigbee_bulb = ZigbeeDriver("Zigbee_Level_ColorTemperature_Bulb", zigbee_bulb_driver_template)
zigbee_bulb:run()
I believe that this beta phase should serve to identify faults and propose improvements, as you well do testing and propose.
The default range for the automation display of the colorTemperature capability is supposed to be between 2000k and 6500k, the same as the detail view.
I think it is poorly defined in the defaults libraries and they will have to correct it for when they create their stock driver.
Then, we can add a profile, which also includes the color temperature and others capabilities for each bulb, if it is not within the default ranges. It seems that the custom definition for the automations-actions view doesn’t work either.
I think that the work of manufacturers who want their light devices to work in smartthings will be:
- Propose to modify the stock driver with their profile or
- Create a custom driver from the defualt libraries and add device profile and fingerprint and create a channel for device installation. All this can be done in 60 minutes if the default libraries is fine.
Users who want to use non-certified devices and are not in the default or driver stock ranges, will have the possibility of using the tools to modify the profile and fingerprint as has been done so far with the DTHs and share them in the community or on channels.
@milandjurovic71, I am going to create a profile for the ecostmart and silvana bulbs between 2700 and 6500 so you can check if it works.
Thanks for yours comments
1 Like