[ST Edge/Beta] Zigbee dimmer driver (supports MOES)

Devices & Integrations Community Created Device Types
,
1

Supported devices

The driver supports

  • Moes MS-105Z Dimmer

Moes MS-105Z Dimmer

Moes_MS-105Z
Moes_MS-105Z640Ă—640 48.8 KB

Single gang Zigbee dimmer, Max Power 150W. Requires Neutral wire.
Implemented with Tuya private cluster.
To pair the device, enter the pairing mode, then switch it on/off 10 times.

The detailed view contains

  • Switch (to turn on/off)
  • Dimmer (switch level)
  • Preset button (Sets dimmer to predefined switch level. The predefined value can be changed in settings)

It also shows signal strength.

Moes MS-105Z Dimmer-detailed view
Moes MS-105Z Dimmer-detailed view360Ă—760 17.1 KB

Channel

https://api.smartthings.com/invitation-web/accept?id=b119aed9-4083-46bc-bc16-584b9d738abe
Please install
Zigbee Dimmer Driver [YG]

Cheers,
Yakov

9 Likes
2

Hello,
As of today my zigbee dimmer has issue:
Smartthings app does not switch on/off, but
When i use phisycal switch the app updates the status.

Can you help?
Dusan

3

Hi @dusanhauko ,
Could you please provide the log from the driver, that capture switching on/off from the app?
Thanks

4

Hey,
I did reset and repair and it’s working ok. Thanks anyway for good driver :wink:

1 Like
5

hello, I also have the same problem, from the app it no longer works but from physical button it goes, if reset works for a few days and then the same problem returns

6

@EnrCol ,
Could you please provide the log from the driver?
Thanks

7

can you tell me where I find the logs? thank you

8

@EnrCol , please see instructions for collecting logs in the following link.
Thanks

9

Hi @ygerlovin

Do you think your driver will work with MOES 2 Gang ZigBee Dimmer Module as well?

10

@Raboo
2 gangs are not supported. I’m looking for volunteers to provide logs for it

1 Like
11

@ygerlovin ok, I am thinking of buying one. If I do I will provide logs then.

1 Like
12

Hi,
This driver can handle this device?

  • zigbeeNodeType: ROUTER
  • application: 42
  • endpointId: 01
  • manufacturer: _TZE200_dfxkcots
  • model: TS0601

raw: 01 0104 0051 01 04 0000 0004 0005 EF00 02 0019 000A

It’s a Moes Smart Dimmer Switch

13

Hi @Pyrylamo ,

Unfortunately, only MS-105Z is supported

14

The product’s model number in your post is not the same as the one on the manufacturers website. First I was confused and thought that this product might not be sold anymore. But if I compare the serial number on your picture with the one that moes sells it seems to be this one, right?

They say that the model name is “ZM-105-MS”. Would be nice if you could confirm if it’s the right one. A link to the product site in your post would be awesome. And by the way: thank you very much for the driver :slight_smile:

15

Hi

I have 2 gang dimmer
model is 105bz

please check this post that I have written

16

@BluePicture ,
I don’t have this device, I wrote the driver for someone else.
So I provided all the info I was given and I have no way to validate it.
Sorry if it caused confusion

17

Hi @Chryth.jin ,
I find it very challenging to add support for multi component devices without having a device to test against.
I’m sorry, I won’t be able to help you.

18

Hi @ygerlovin
Do you have a working Edge driver for a Tuya switch TS0601 that uses EF00? (_TZE200)

(No dimmer, no parent/child… Just a switch)

If so, would you be so kind as to share the code please?

Thank you

19

thanks for relpy~!

20

Hi @ygerlovin
Do you have a driver for this device? If not, is it possible to create one?

Tuya zigbee human body sensor radar detector, real-time microwave motion.

Sensor Presensa