# Smartthings with Aeon Labs Smart Energy monitor? **URL:** \ **Category:** Devices & Integrations\ **Created:** [October 6, 2014, 12:30am UTC](https://community.smartthings.com/t/smartthings-with-aeon-labs-smart-energy-monitor/5553 "2014-10-06T00:30:09Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![joylove](https://avatars.discourse-cdn.com/v4/letter/j/a587f6/32.png) [@joylove](https://community.smartthings.com/u/joylove)\ **Post date:** [October 6, 2014, 12:30am UTC](https://community.smartthings.com/t/smartthings-with-aeon-labs-smart-energy-monitor/5553/1 "2014-10-06T00:30:10Z")
Similar to [this](http://community.smartthings.com/t/aeon-labs-energy-meter-clamps/359/30) thread, which got derailed with discussions about a different but similarly named Aeonlabs product, when will Smartthings support these energy clamps? Thanks. ---
**Author:** ![darkoperator](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/darkoperator/32/12594_2.png) [@darkoperator](https://community.smartthings.com/u/darkoperator)\ **Post date:** [October 6, 2014, 1:41am UTC](https://community.smartthings.com/t/smartthings-with-aeon-labs-smart-energy-monitor/5553/2 "2014-10-06T01:41:25Z")
I just ordered one today and in the comments on amazon people said it worked with Smartthings. Once I get it this week and install it I will report on my experience with it. ---
**Author:** ![theedpope](https://avatars.discourse-cdn.com/v4/letter/t/a183cd/32.png) [@theedpope](https://community.smartthings.com/u/theedpope)\ **Post date:** [October 6, 2014, 2:04am UTC](https://community.smartthings.com/t/smartthings-with-aeon-labs-smart-energy-monitor/5553/3 "2014-10-06T02:04:43Z")
i can verify that it works with SmartThings. Once it pairs, you may have to go to the IDE to select the Aeon Home Energy Monitor directly. ---
**Author:** ![joylove](https://avatars.discourse-cdn.com/v4/letter/j/a587f6/32.png) [@joylove](https://community.smartthings.com/u/joylove)\ **Post date:** [October 6, 2014, 4:52am UTC](https://community.smartthings.com/t/smartthings-with-aeon-labs-smart-energy-monitor/5553/4 "2014-10-06T04:52:12Z")
Awesome thanks! Does it support usage charts? ---
**Author:** ![theedpope](https://avatars.discourse-cdn.com/v4/letter/t/a183cd/32.png) [@theedpope](https://community.smartthings.com/u/theedpope)\ **Post date:** [October 6, 2014, 11:39pm UTC](https://community.smartthings.com/t/smartthings-with-aeon-labs-smart-energy-monitor/5553/5 "2014-10-06T23:39:08Z")
Well, not through ST as it stands how. However, you can use Xively which will pull the data and provide charts for you as needed. It takes a bit more to setup as I was not a user of the service. But, it was not hard at all. ---
**Author:** ![joylove](https://avatars.discourse-cdn.com/v4/letter/j/a587f6/32.png) [@joylove](https://community.smartthings.com/u/joylove)\ **Post date:** [October 29, 2014, 10:32pm UTC](https://community.smartthings.com/t/smartthings-with-aeon-labs-smart-energy-monitor/5553/6 "2014-10-29T22:32:33Z")
Well for some reason my clamps are tuck at 474W. I think it might be due to a recent FW update in ST so I’ll unfair and re-pair. Just irritating because I need to expose the 208V 200A guts of my fuse box to access the pairing button. ---
**Author:** ![darkoperator](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/darkoperator/32/12594_2.png) [@darkoperator](https://community.smartthings.com/u/darkoperator)\ **Post date:** [October 30, 2014, 11:22am UTC](https://community.smartthings.com/t/smartthings-with-aeon-labs-smart-energy-monitor/5553/7 "2014-10-30T11:22:51Z")
> [@theedpope](#): > > However, you can use Xively I have been waiting for over 2 weeks now for the free dev account from them to be able to chart my consumption and still no reply from them ☹ is there any other service that could be used? ---
**Author:** ![001010](https://yyz2.discourse-cdn.com/smartthings/user_avatar/community.smartthings.com/001010/32/17865_2.png) [@001010](https://community.smartthings.com/u/001010)\ **Post date:** [August 2, 2015, 2:33pm UTC](https://community.smartthings.com/t/smartthings-with-aeon-labs-smart-energy-monitor/5553/8 "2015-08-02T14:33:03Z")
This is probably way late, but just found out that Xively is no longer giving free dev accounts. They have changed their model and services to paying Enterprise users. Another option would be ThingSpeak ([http://thingspeak.com/](http://thingspeak.com/)) Hope this helps